Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Darius Albrektas"'
Autor:
Darius Albrektas, Agne Styraite
Publikováno v:
Drvna Industrija, Vol 73, Iss 2, Pp 115-123 (2022)
Depending upon the conditions in which they are used, wood products are required to have been produced with the necessary moisture levels for the intended job. In many cases, this means that drying is required in order to achieve these moisture level
Externí odkaz:
https://doaj.org/article/287c1677cfad4a3b9de1c0cb9c3df623
Publikováno v:
Applied Sciences, Vol 13, Iss 2, p 925 (2023)
Timber and timber products are renewable materials that, due to their durability and strength properties, meet the requirements of the construction industry, are widely used in buildings. An analysis of the scientific literature has shown that there
Externí odkaz:
https://doaj.org/article/7b69e477a9e84073b6d3712e77f5a4ce
Publikováno v:
Medžiagotyra, Vol 25, Iss 4, Pp 455-459 (2019)
The goal of this investigation was to find out influence of heat treatment at low temperatures on the Lithuanian spruce wood bending strength. The influence of heating temperature and duration on the strength of spruce wood during statical bending ha
Externí odkaz:
https://doaj.org/article/9fa42a698c374c31984c8bef52fecc58
Publikováno v:
Drvna Industrija, Vol 66, Iss 1, Pp 3-10 (2015)
This research paper examines the interdependence between wood sorption properties and its dimensions, species and drying temperature. The research was carried out on specimens of six species of wood (oak, ash, aspen, birch, spruce and pine) which had
Externí odkaz:
https://doaj.org/article/29b5ec31a16f4d6495fec8a850b23538
Autor:
Povilas NAVICKAS, Darius ALBREKTAS
Publikováno v:
Medžiagotyra, Vol 19, Iss 3, Pp 291-294 (2013)
This research was performed in order to determine how the heating process affects sorption properties and dimensional and shape stability of oak, lime and birch wood. By subjecting specimens to 3 hours heating at 130, 160, 190 and 220 ºC temperature
Externí odkaz:
https://doaj.org/article/cb86825cc1be4c64acd3500886810d40
Autor:
Jonas VOBOLIS, Darius ALBREKTAS
Publikováno v:
Medžiagotyra, Vol 18, Iss 3, Pp 262-266 (2012)
In the present research the investigation of finishing wood particle boards is presented. The testing process of wood particle boards involved an original stand. The following three types of finished boards underwent evaluation: finished with veneer
Externí odkaz:
https://doaj.org/article/8dcb90841cd941a8a1dbb5ae536104e5
Publikováno v:
WOOD RESEARCH 67(1) 2022. 67:41-50
A few variations of open-holes in wood-based pieces, particle board and plywood were modeled in this article. The modulus of elasticity and the coefficient of damping for these pieces were determined using static and dynamic methods and the effect of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e463a809c7019a4b2e4e3b55d40bc62f
https://doi.org/10.37763/wr.1336-4561/67.1.4150
https://doi.org/10.37763/wr.1336-4561/67.1.4150
Publikováno v:
Wood Research. 65:353-364
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e7f0a2682399617a9ed7be4ae83217fe
https://doi.org/10.37763/wr.1336-4561/65.3.353364
https://doi.org/10.37763/wr.1336-4561/65.3.353364
Publikováno v:
Drvna industrija
Volume 70
Issue 1
Volume 70
Issue 1
In this study, the effect of finishing process on the mechanical properties of oak and pine wood elements were investigated. A special test stand was used for this purpose. Specimens were divided into subgroups, the resonance frequency of the specime
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d14aea6528b36e33fac9b96fef9d2007
https://doi.org/10.5552/drvind.2019.1816
https://doi.org/10.5552/drvind.2019.1816
Autor:
Darius Albrektas, Ernestas Ivanauskas
Publikováno v:
Drvna industrija
Volume 72
Issue 1
Volume 72
Issue 1
The research investigated the impact of environmental factors (temperature and humidity) on pine glulam, oak glulam, and laminated veneer lumber (LVL) elements, all of which can be used in building structures. Elements underwent freezing, heating, dr
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::49d050eede3bca786fc96e0eece3f74e
https://hrcak.srce.hr/file/366398
https://hrcak.srce.hr/file/366398