Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Dario Loaldi"'
Autor:
Dario Loaldi, Francesco Regi, Federico Baruffi, Matteo Calaon, Danilo Quagliotti, Yang Zhang, Guido Tosello
Publikováno v:
Micromachines, Vol 11, Iss 6, p 614 (2020)
The increasing demand for micro-injection molding process technology and the corresponding micro-molded products have materialized in the need for models and simulation capabilities for the establishment of a digital twin of the manufacturing process
Externí odkaz:
https://doaj.org/article/22bebdc0c9214852a3909b8bbeb3ea4d
Publikováno v:
Micromachines, Vol 11, Iss 5, p 509 (2020)
The integration of additive manufacturing direct-writing technologies with injection molding provides a novel method to combine functional features into plastic products, and could enable mass-manufacturing of custom-molded plastic parts. In this wor
Externí odkaz:
https://doaj.org/article/61e0ef6eb3df428c96250a090a8017c5
Autor:
Dario Loaldi, Danilo Quagliotti, Matteo Calaon, Paolo Parenti, Massimiliano Annoni, Guido Tosello
Publikováno v:
Micromachines, Vol 9, Iss 12, p 653 (2018)
Injection compression molding (ICM) provides enhanced optical performances of molded polymer optics in terms of birefringence and transmission of light compared to Injection molding (IM). Nevertheless, ICM requires case-dedicated process optimization
Externí odkaz:
https://doaj.org/article/f046ba89881e44e1a84e2b25e1a38611
Autor:
Abdelkhalik Eladl, Rania Mostafa, Aminul Islam, Dario Loaldi, Hassan Soltan, Hans N. Hansen, Guido Tosello
Publikováno v:
Micromachines, Vol 9, Iss 2, p 58 (2018)
This paper reports an investigation of the effects of process parameters on the quality characteristics of polymeric parts produced by micro injection moulding (μIM) with two different materials. Four injection moulding process parameters (injection
Externí odkaz:
https://doaj.org/article/37159dbcc59e4a71ad7fc2006637ac23
Autor:
Guido Tosello, Simone Carmignato, Dario Loaldi, Mandaná Moshiri, Filippo Zanini, Damiano Sgaravato
Publikováno v:
Moshiri, M, Loaldi, D, Zanini, F, Sgaravato, D, Carmignato, S & Tosello, G 2021, ' Analysis of an as-built metal additively manufactured tool cavity insert performance and advantages for plastic injection moulding ', Journal of Manufacturing Processes, vol. 61, pp. 369-382 . https://doi.org/10.1016/j.jmapro.2020.11.035
Journal of Manufacturing Processes
Journal of Manufacturing Processes
Metal additive manufacturing (MAM) of mould components is associated with cost-intensive post-process finishing operations, which are currently one of the main drawbacks preventing wider industrial adoption of MAM. This work analyses the current poss
Autor:
Dongya Li, Jeppe Revall Frisvad, Mads Emil Brix Doest, Francesco Regi, Yang Zhang, Dario Loaldi, Guido Tosello
Publikováno v:
Precision Engineering. 60:594-601
Micro-structured surfaces are increasingly being used on parts and products to embed functional properties that could be optical, electrical, thermal, or likewise. In this work, directional optical properties were achieved on plastic with a microstru
Autor:
Yang Zhang, Guido Tosello, Francesco Regi, Dario Loaldi, Matteo Calaon, Danilo Quagliotti, Federico Baruffi
Publikováno v:
Micromachines
Loaldi, D, Regi, F, Baruffi, F, Calaon, M, Quagliotti, D, Zhang, Y & Tosello, G 2020, ' Experimental Validation of Injection Molding Simulations of 3D Microparts and Microstructured Components Using Virtual Design of Experiments and Multi-Scale Modeling ', Micromachines, vol. 11, no. 6, 614 . https://doi.org/10.3390/mi11060614
Micromachines, Vol 11, Iss 614, p 614 (2020)
Volume 11
Issue 6
Loaldi, D, Regi, F, Baruffi, F, Calaon, M, Quagliotti, D, Zhang, Y & Tosello, G 2020, ' Experimental Validation of Injection Molding Simulations of 3D Microparts and Microstructured Components Using Virtual Design of Experiments and Multi-Scale Modeling ', Micromachines, vol. 11, no. 6, 614 . https://doi.org/10.3390/mi11060614
Micromachines, Vol 11, Iss 614, p 614 (2020)
Volume 11
Issue 6
The increasing demand for micro-injection molding process technology and the corresponding micro-molded products have materialized in the need for models and simulation capabilities for the establishment of a digital twin of the manufacturing process
Autor:
Martin Kain, Dario Loaldi, Ali Davoudinejad, Matteo Calaon, Vedel-Smith, N. K., Haahr‐lillevang, L., David Bue Pedersen, Guido, Tosello
Publikováno v:
Kain, M, Loaldi, D, Davoudinejad, A, Calaon, M, Vedel-Smith, N K, Haahr-Lillevang, L, Pedersen, D B & Tosello, G 2019, Dimensional and Form Characterization of a Benchmarking Specimen Subjected to Different Post-Processing Technologies for Metal Additive Manufacturing . in A Bernard, R K Leach, D B Pedersen & J S Taylor (eds), Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019) . The European Society for Precision Engineering and Nanotechnology, pp. 104-5, Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Nantes, France, 16/09/2019 .
Technical University of Denmark Orbit
Technical University of Denmark Orbit
The major interest for the use of Metal Additive Manufacturing (MAM) in precision tooling have led to a large demand of increased dimensional and form accuracy. In order to characterize both the manufacturing process itself as well as the subsequent
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::1c5acabccf809a444108a464dbd151bc
https://orbit.dtu.dk/en/publications/dimensional-and-form-characterization-of-a-benchmarking-specimen-subjected-to-different-postprocessing-technologies-for-metal-additive-manufacturing(b6010828-931a-4fe5-9c6b-af078d705066).html
https://orbit.dtu.dk/en/publications/dimensional-and-form-characterization-of-a-benchmarking-specimen-subjected-to-different-postprocessing-technologies-for-metal-additive-manufacturing(b6010828-931a-4fe5-9c6b-af078d705066).html
Autor:
Hassan Soltan, Rania Mostafa, Dario Loaldi, Aminul Islam, Hans Nørgaard Hansen, Abdelkhalik Eladl, Guido Tosello
Publikováno v:
Micromachines, Vol 9, Iss 2, p 58 (2018)
Eladl, A, Mostafa, R, Islam, A, Loaldi, D, Soltan, H, Hansen, H N & Tosello, G 2018, ' Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features ', Micromachines, vol. 9, no. 2, 58 . https://doi.org/10.3390/mi9020058
Micromachines; Volume 9; Issue 2; Pages: 58
Micromachines
Eladl, A, Mostafa, R, Islam, A, Loaldi, D, Soltan, H, Hansen, H N & Tosello, G 2018, ' Effect of process parameters on flow length and flash formation in injection moulding of high aspect ratio polymeric micro features ', Micromachines, vol. 9, no. 2, 58 . https://doi.org/10.3390/mi9020058
Micromachines; Volume 9; Issue 2; Pages: 58
Micromachines
This paper reports an investigation of the effects of process parameters on the quality characteristics of polymeric parts produced by micro injection moulding (μIM) with two different materials. Four injection moulding process parameters (injection
Publikováno v:
Loaldi, D, Zhang, Y, Calaon, M, Yang, Y, Guo, P, Garnæs, J & Tosello, G 2018, ' Pitch measurements validation of steel inserts micro-grooves with light diffractive properties using a Laser Scanning Confocal Microscope (LSCM) and an Atomic Force Microscope (AFM) ', 18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18), Venice, Italy, 04/06/2018-08/06/2018 .
Technical University of Denmark Orbit
Technical University of Denmark Orbit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::79e34ab9c7e039566cfda23b0e93a805
https://orbit.dtu.dk/en/publications/3504d969-736b-49ee-8302-04fcca562e5f
https://orbit.dtu.dk/en/publications/3504d969-736b-49ee-8302-04fcca562e5f