Zobrazeno 1 - 10
of 61
pro vyhledávání: '"Daniele Botto"'
Publikováno v:
Data in Brief, Vol 54, Iss , Pp 110374- (2024)
This data article describes the extensive experimental dataset of friction hysteresis measured during the round robin test of the original research article [1]. The round robin test was performed on the two different fretting rigs of Imperial College
Externí odkaz:
https://doaj.org/article/e0d5cdef2202447892479904c5901c5e
Publikováno v:
Applied Sciences, Vol 11, Iss 24, p 12008 (2021)
This paper focuses on the contact characteristics of the blade root joints subjected to the dry friction damping under periodic excitation. The numerical method and experimental procedure are combined to trace the contact behavior in the nonlinear vi
Externí odkaz:
https://doaj.org/article/f65ac9a3dec4429f907c45b92b61a599
Publikováno v:
Applied Sciences, Vol 10, Iss 17, p 5861 (2020)
When studying complex mechatronic systems, it is useful to build models able to simulate both the dynamics of the phenomenon and the control system applied. Typically, the bodies involved are modeled as rigid bodies. In this work, a technique for mod
Externí odkaz:
https://doaj.org/article/6a126cdf1f904c72979d23b3f503f2bf
Publikováno v:
Volume 8B: Structures and Dynamics — Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration.
This paper addresses two main subjects. Firstly, a novel test setup is described to experimentally study the nonlinear dynamic behavior of a turbine blade coupled with two mid-span dampers. To this end, a representative turbine blade and mid-span fri
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e5d4889db16ebbd79d85316b20e36a88
https://doi.org/10.1115/gt2022-79980
https://doi.org/10.1115/gt2022-79980
Publikováno v:
Journal of KONBiN, Vol 50, Iss 1, Pp 341-357 (2020)
Composite fan blades are more and more common both in aviation and ground applications. This work aims to characterize the vibration parameters of plastic blades installed in a wind tunnel fan by a non-contact method, namely blade tip timing (BTT). B
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::5324fad21dbd46cfbe3c9a0edf224bc2
https://doi.org/10.2478/jok-2020-0020
https://doi.org/10.2478/jok-2020-0020
Publikováno v:
Materials; Volume 15; Issue 3; Pages: 1028
Materials, Vol 15, Iss 1028, p 1028 (2022)
Materials, Vol 15, Iss 1028, p 1028 (2022)
Surface treatments are normally carried out after machining. Surface treatment is a costly and time-consuming process. Hence, it makes sense to reduce the requirement of surface treatment as much as possible. Electrical Discharge Machining (EDM) is a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e57bf7484833799f2839ebf2b9777e00
Friction dampers are one of the most common secondary structures utilized to alleviate excessive vibration amplitudes in turbomachinery applications. In this paper, the dynamic behavior of the turbine bladed disks coupled with one of the special damp
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::cd1f8b91c0e8c23f25082f0bf2612f3b
http://hdl.handle.net/11583/2946034
http://hdl.handle.net/11583/2946034
