Zobrazeno 1 - 10
of 30
pro vyhledávání: '"Daniel TOBOŁA"'
Autor:
Daniel Toboła, Aneta Łętocha
Publikováno v:
Frontiers in Mechanical Engineering, Vol 7 (2021)
Surface integrity is important factor for components exposed to wear, like cold working tools, which need to possess high hardness combined with high wear resistance. Surface treatments such as grinding, hard turning, and hard turning with slide burn
Externí odkaz:
https://doaj.org/article/8a45760043e146b6bddf762919ae722c
Publikováno v:
Medžiagotyra, Vol 21, Iss 4, Pp 511-516 (2015)
D2 belongs to traditional steels, frequently used in metalworking industry. Shot peening and nitriding are known to improve the wear resistance of D2. In this work we focus on processes of slide burnishing and industrial low temperature gas nitriding
Externí odkaz:
https://doaj.org/article/d881d09261044bbdaab40107767407bc
Autor:
Piotr BEDNARSKI, Dionizy BIAŁO, Witold BROSTOW, Kazimierz CZECHOWSKI, Waldemar POLOWSKI, Piotr RUSEK, Daniel TOBOŁA
Publikováno v:
Medžiagotyra, Vol 19, Iss 4, Pp 367-372 (2013)
Burnishing of metal surfaces can affect positively tribological and mechanical properties such as fatigue strength, wear resistance, contact stiffness and bearing capacity. Burnishing affects the entire surface topography, including surface roughness
Externí odkaz:
https://doaj.org/article/6eebc24156fc48808b5ea3b5e902efe4
Publikováno v:
Applied Surface Science. 602:154327
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1d8723cbec7b8f77784245df45b5f15a
https://doi.org/10.1016/j.apsusc.2022.154327
https://doi.org/10.1016/j.apsusc.2022.154327
Diamond-like carbon (DLC) coatings are becoming well established across many industrial sectors including aerospace, automotive, oil and gas, and cold-forming tools. While DLC coatings exhibit good mechanical properties and a low coefficient of frict
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6231ca067d79cabbc82583fee2d1a974
https://e-space.mmu.ac.uk/628192/
https://e-space.mmu.ac.uk/628192/
Autor:
Janusz Kalisz, Daniel Toboła
Publikováno v:
Mechanik. 92:718-722
Results of surface topography analysis and selected tribological properties of samples of 100Cr6 bearing steel after turning with variable feed are presented. The hardness of samples after heat treatment carried out in a vacuum furnace (including que
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8601dda3d1724b1af79a0440651d09d5
https://doi.org/10.17814/mechanik.2019.11.95
https://doi.org/10.17814/mechanik.2019.11.95
New diamond composite tools and their impact on AISI 4140 alloy steel surface after slide burnishing
Publikováno v:
Mechanik. 92:610-615
Working parts of slide burnishing tools were made from two new diamond composites with ceramic bonding: MAX Ti3GeC2 and TiB2nano phases, respectively. Microstructure and micro composition were analyzed by scanning and transmission electron microscopy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::768797915eee3e4852a5757dbd7f839d
https://doi.org/10.17814/mechanik.2019.10.78
https://doi.org/10.17814/mechanik.2019.10.78
Publikováno v:
Mechanik. 92:174-178
The state of the art of deposition of wear resistant coatings on cemented carbide and high speed steel cutting tools is presented with special regard to new possibilities in this field. On the ground of some results of research carried out at the Ins
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a08e2f713ca1ef63f464ce92729d25c8
https://doi.org/10.17814/mechanik.2019.3.26
https://doi.org/10.17814/mechanik.2019.3.26
Autor:
Daniel Toboła
Publikováno v:
Wear. :204106
Wear is the most serious problem in service of moving steel parts. To mitigate it, we have studied phase transformations in the surface layer of Vanadis 6 tool steel obtained after several treatment routes. Changes in wear resistance were examined in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1f304df5ce93960d1780536f4162fc78
https://doi.org/10.1016/j.wear.2021.204106
https://doi.org/10.1016/j.wear.2021.204106
Publikováno v:
Mechanik. 91:1124-1128
Issues related with an influence of selected sequential surface treatment processes on the stereometric features of the formed surface layer (SL) of Vanadis 6 steel are presented. Some variants of machining include: turning (T), turning–burnishing
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6bc969c6e6d92fc20daf3b982e8fbddc
https://doi.org/10.17814/mechanik.2018.12.200
https://doi.org/10.17814/mechanik.2018.12.200