Zobrazeno 1 - 10
of 63
pro vyhledávání: '"Daniel J. Shanefield"'
Autor:
Daniel J. Shanefield
Turn to this multipurpose reference for a practical understanding of electronics in the factory or laboratory. It's perfect for people who are not electrical engineers but who need to use electronic equipment every day at work. Avoid or solve common
Publikováno v:
Journal of the American Ceramic Society. 91:1169-1174
Most semiconductor devices are now packaged in an epoxy polymer composite, which includes silica powder filler for reducing the thermal expansion coefficient. However, increased heat output from near-future semiconductors will require higher thermal
Publikováno v:
Colloids and Surfaces A: Physicochemical and Engineering Aspects. 316:95-103
The purpose of this research is to enhance the thermal conductivity of polymeric protective coatings on electronic components. Thermally conductive but electrically insulating solid powders of aluminum oxide or aluminum nitride (AlN) are commonly dis
Publikováno v:
Journal of the American Ceramic Society. 85:134-138
The role of internal lubricants in the closure of large intergranular pores during dry-pressing was investigated. Alumina was spray-dried with and without an internal lubricant to yield granules with similar characteristics other than lubricant effec
Publikováno v:
Journal of the American Ceramic Society. 85:749-754
The effects of an externally applied plasticizer on compaction behavior and green microstructure quality of spray-dried powders was investigated. The plasticizer was applied to the external surfaces of already spray-dried powders by spraying it on tu
Autor:
Daniel J. Shanefield
Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the cera
Publikováno v:
Journal of the American Ceramic Society. 82:1757-1760
A study of the adsorption of several surfactants onto lead zirconate titanate (PZT) powder was performed. The adsorption of oleyl alcohol, stearyl alcohol, oleic acid, and stearic acid onto PZT-5H powder (surface area = 2.58 m2/g) was measured by the
Publikováno v:
Ceramics International. 24:433-439
Thermal analysis techniques including thermal gravimetric analysis (TGA), differential thermal analysis (DTA), and TG-FTIR were employed to investigate the thermal decomposition behaviours of poly(propylene carbonate) as a neat polymer and in the pre
Publikováno v:
Journal of the American Ceramic Society. 76:166-172
The surface nature and the composition of AlN powder, as-received and exposed to binder burnout, were studied using XPS and TEM. The surface of as-received AlN powder was covered by a thin layer of aluminum oxynitride and oxide mixture. A small porti
Publikováno v:
A Collection of Papers Presented at the 13th Annual Conference on Composites and Advanced Ceramic Materials, Part 2 of 2: Ceramic Engineering and Science Proceedings, Volume 10, Issue 9/10
The gas-metal eutectic method was used to bond copper to sintered high alumina ceramics which had different sintering aid compositions in the magnesia-calcia-silica system. The highest average copper-alumina peel adhesion strength, 205 N/cm, was obse
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3d392ff9ba1150bd40fa69b5ae90fd1e
https://doi.org/10.1002/9780470310588.ch34
https://doi.org/10.1002/9780470310588.ch34