Zobrazeno 1 - 10
of 180
pro vyhledávání: '"Damir Godec"'
Publikováno v:
Tehnički Glasnik, Vol 18, Iss 3, Pp 425-430 (2024)
Warpage of the injection moulded parts is one of the most common defects after demoulding, which is intensively present in thin-walled moulded parts or parts with non-uniform wall thickness. The level of the warpage can be reduced by optimizing the m
Externí odkaz:
https://doaj.org/article/f1bf12e0400a4d14b54f888aec0a61f8
This open access book gives both a theoretical and practical overview of several important aspects of additive manufacturing (AM). It is written in an educative style to enable the reader to understand and apply the material. It begins with an int
Publikováno v:
Journal of Manufacturing and Materials Processing, Vol 8, Iss 3, p 106 (2024)
The influence of 3D printing parameters on compressive properties is an important factor in the application of additive manufacturing processes for products subjected to compressive loads in use. In this study, the compressive strength and compressiv
Externí odkaz:
https://doaj.org/article/ac3efcc2433d4a019e96c1ccb62d9e74
Publikováno v:
Tehnički Glasnik, Vol 17, Iss 2, Pp 244-250 (2023)
In the area of mobility (transport), great efforts are being made to optimize means of transport. While reducing their mass the main goal is to maintain or even improve the performance of the means of transport. Additive manufacturing allows the prod
Externí odkaz:
https://doaj.org/article/bdbf6944d03d4621923d713b721c71aa
Publikováno v:
Tehnički Glasnik, Vol 16, Iss 3, Pp 315-319 (2022)
Article presents analysis of the influence of infill pattern on 3D printed parts compression properties. Most of the researches from this field covered tensile 3D-printed parts properties, but for some applications compression mechanical properties a
Externí odkaz:
https://doaj.org/article/087e5c7a102c467cab18d7657e69bf89
Publikováno v:
Tehnički Glasnik, Vol 15, Iss 2, Pp 258-266 (2021)
Computer simulation of injection moulding process is a powerful tool for optimisation of moulded part geometry, mould design and processing parameters. One of the most frequent faults of the injection moulded parts is their warpage, which is a result
Externí odkaz:
https://doaj.org/article/3479e13603894ce78c9546dab2603061
Publikováno v:
Tehnički Glasnik, Vol 15, Iss 4, Pp 491-497 (2021)
Fused filament fabrication (FFF) is currently one of the most popular additive manufacturing processes due to its simplicity and low running and material costs. Support structures, which are necessary for overhanging surfaces during production, in mo
Externí odkaz:
https://doaj.org/article/9952c0c164af4e8b927068a1c4ad684b
Autor:
Maja RUJNIĆ-SOKELE
Publikováno v:
Polimeri : časopis za plastiku i gumu
Volume 26
Issue 3
Volume 26
Issue 3
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=od_______951::10408e7a4514bbc8c0722c7edc08f9eb
https://hrcak.srce.hr/file/2570
https://hrcak.srce.hr/file/2570
Publikováno v:
Tehnički Glasnik, Vol 14, Iss 2, Pp 218-223 (2020)
In case of small-batch production, applications of classic technologies and tools, for e.g. injection moulding and classic moulds are not competitive. Application of additive technologies (AT) for direct production of finally parts can partially redu
Externí odkaz:
https://doaj.org/article/1ee5013ad40e4a71bf1ff13747213060
Autor:
Mladen Šercer, Tonči Rezić, Damir Godec, Damir Oros, Ana Pilipović, Franjo Ivušić, Iva Rezić, Martina Andlar, Roland Ludwig, Božidar Šantek
Publikováno v:
Food Technology and Biotechnology, Vol 57, Iss 2, Pp 272-281 (2019)
This work investigates the methodology of producing a 3D-printed microreactor from the acrylic resin by PolyJet Matrix process. The PolyJet Matrix technology employs different materials or their combinations to generate 3D-printed structures, from sm
Externí odkaz:
https://doaj.org/article/40b4d3618f574ea5b3af2403adeb167e