Zobrazeno 1 - 10
of 87
pro vyhledávání: '"Daisy Nestler"'
Publikováno v:
Ceramics, Vol 7, Iss 1, Pp 68-85 (2024)
3D printing enables the creation of complex and sophisticated designs, offering enhanced efficiency, customizability, and cost-effectiveness compared to traditional manufacturing methods. Ceramics, known for their heat resistance, hardness, wear resi
Externí odkaz:
https://doaj.org/article/7f5c4935567b48a0bed4398bb5fca97d
Publikováno v:
Materials, Vol 17, Iss 10, p 2175 (2024)
The inductive heating of a CMC susceptor for industrial applications can generate very high process temperatures. Thus, the behavior of a silicon carbide-based matrix with carbon-fiber-reinforced carbon (C/C-SiC) as a susceptor is investigated. Speci
Externí odkaz:
https://doaj.org/article/0e3319f1acf54f17b33fea63e274a19d
Autor:
Jonas H. M. Stiller, Kristina Roder, David Löpitz, Marcus Knobloch, Daisy Nestler, Welf-Guntram Drossel, Lothar Kroll
Publikováno v:
Ceramics, Vol 6, Iss 1, Pp 330-341 (2023)
Composites made of carbon-fiber-reinforced carbon (C/C or CFC) are high-performance materials with a wide range of properties, making them especially suitable for the design of thermally and mechanically highly stressed components. As the production
Externí odkaz:
https://doaj.org/article/1cbbe7e797ca475db9a7fc3eb118d403
Publikováno v:
Polymers, Vol 16, Iss 2, p 221 (2024)
Process-induced defects during thermoforming are widespread problems in laminate manufacturing. The aim of this study is to describe the effects of holding time and pressure on several properties of the manufactured laminate. A design of experiments
Externí odkaz:
https://doaj.org/article/2ad7b3dbb00746cba93ad1440f3719c5
Publikováno v:
Materials, Vol 15, Iss 3, p 764 (2022)
Innovative materials for substituting metals are required to reduce the mass of moving components. This decreases the CO2 emissions of overall systems. A thermoset sandwich for high mechanical properties and thermal insulation is presented in this pa
Externí odkaz:
https://doaj.org/article/19eb33da67c64e56b96aa790313b1f91
Autor:
Joerg Bellmann, Kristina Roder, Martina Zimmermann, Eckhard Beyer, Lothar Kroll, Daisy Nestler
Publikováno v:
Metals, Vol 11, Iss 6, p 868 (2021)
Magnetic pulse welding (MPW) is a promising joining technology for the large-scale production of dissimilar metallic joints. Although the heat input is comparatively low, the temporary occurrence of high temperatures in the joining gap was found to p
Externí odkaz:
https://doaj.org/article/ac9465179c6342b3a9b2cea4ed6a8fd9
Autor:
Kay Schäfer, Daisy Nestler, Jürgen Tröltzsch, Ikenna Ireka, Dariusz Niedziela, Konrad Steiner, Lothar Kroll
Publikováno v:
Polymers, Vol 12, Iss 1, p 105 (2020)
Products made of polyurethane foam are manufactured by the chemical reaction of various low-viscosity raw materials and additives. The diversity of different formulations to meet the requirements of the market makes the characterization of their proc
Externí odkaz:
https://doaj.org/article/9fc17256e5a34dd8ab538de8ef984d96
Publikováno v:
Medžiagotyra, Vol 20, Iss 3, Pp 247-251 (2014)
Silver is a well-known material in the field of contact materials because of its high electrical and thermal conductivity. However, due to its bad mechanical and switching properties, silver alloys or reinforcements of the ductile silver matrix are r
Externí odkaz:
https://doaj.org/article/14996d4b6b0e47a8adefe1259095bd0b
Publikováno v:
Metals, Vol 8, Iss 2, p 143 (2018)
The research and development of new materials such as particle-reinforced aluminum matrix composites (AMCs) will only result in a successful innovation if these materials show significant advantages not only from a technological, but also from an eco
Externí odkaz:
https://doaj.org/article/1c81c6d92a084e68ad2347ab1bf9f420
Publikováno v:
Metals, Vol 8, Iss 2, p 110 (2018)
The reinforcement of aluminum alloys with particles leads to the enhancement of their mechanical properties at room temperature. However, the creep behavior at elevated temperatures is often negatively influenced. This raises the question of how it i
Externí odkaz:
https://doaj.org/article/19a99b2ff047485d82c457206402f92e