Zobrazeno 1 - 10
of 13
pro vyhledávání: '"D. V. Shtanskii"'
Autor:
A. S. Konopatskii, K. L. Firestein, I. N. Volkov, D. V. Leibo, V. V. Kalinina, D. V. Golberg, D. V. Shtanskii
Publikováno v:
Technical Physics Letters. 47:792-795
Autor:
Zh. S. Ermekova, Andrei T. Matveev, Ilia N. Volkov, Andrey M. Kovalskii, A. B. Karabanova, D. V. Barilyuk, A. S. Konopatskii, D. V. Shtanskii, V. V. Kalinina
Publikováno v:
Technical Physics Letters. 47:122-125
Continuous nanocrystalline coatings of hexagonal boron nitride (h-BN) with a thickness of ~1000‒350 nm are prepared from highly concentrated aqueous solutions of lithium and sodium borates, which display good film-forming properties. The borate sol
Autor:
E. M. Prikhod’ko, Dmitry G. Kvashnin, Andrei T. Matveev, M. K. Kutzhanov, D. V. Shtanskii, Pavel B. Sorokin, Sh. Korte
Publikováno v:
Technical Physics Letters. 46:342-345
New Al/SiC heteroparticles are investigated experimentally and theoretically. A composite material based on Al and SiC is predicted to exhibit a markedly higher tensile strength than pure Al due to the robust interface between Al and SiC. The theoret
Publikováno v:
Metal Science and Heat Treatment. 57:443-448
Different approaches to formation of hard multicomponent coatings with improved tribological characteristics in a wide temperature range are considered. It is shown that deposition of a thin surface layer or introduction of additional structural comp
Publikováno v:
Russian Journal of Non-Ferrous Metals. 55:97-104
To increase the biointegration of titanium implants, hard bioactive nanostructured coatings based on titanium carbonitride alloyed with phosphorus, calcium, tantalum, and silicon have been suggested and successfully passed approbation. Their influenc
Autor:
Evgeny A. Levashov, A. N. Sheveiko, Mikhail Petrzhik, N. A. Shirmanov, D. V. Shtanskii, F. V. Kiryukhantsev-Korneev
Publikováno v:
Russian Engineering Research. 30:910-920
The structure and properties of TiN, Ti-Si-N, Ti-Al-Si-N, Ti-Cr-Si-N, Ti-Zr-Si-N, Ti-B-N, Ti-Cr-B-N, and Ti-Si-B-N coatings obtained by reactive electric-arc evaporation and magnetronic sputtering of Ti, TiSi, TiAl, TiCr, TiZr, TiBN, TiCrB, and TiSiB
Autor:
Evgeny A. Levashov, F. V. Kiryukhantsev-Korneev, Mikhail Petrzhik, A. N. Sheveiko, D. V. Shtanskii
Publikováno v:
The Physics of Metals and Metallography. 104:167-174
The thermal stability and resistance to high-temperature oxidation of multicomponent nanostructured coatings in the Ti-X-B-N (X = Al, Si, Cr) system have been studied using X-ray diffraction analysis, X-ray photoelectron spectroscopy, secondary-ion m
Publikováno v:
Physics of the Solid State. 45:1177-1184
The structure and mechanical properties of nanostructured thin films based on carbides, nitrides, and borides of transition metals are described. The mechanisms of localized deformation of the films during indentation are compared. It is shown that t
Publikováno v:
Scopus-Elsevier
The hardness, elastic modulus, and elastic recovery of nanostructured boride/nitride films 1–2 µm thick have been investigated by the nanoindentation technique under the maximum loads over a wide range (from 5 to 100 mN). It is demonstrated that o
Autor:
N. A. Glushankova, D. V. Shtanskii, Evgeny A. Levashov, T. A. Chipysheva, Yu. M. Vasil'ev, I. A. Bashkova
Publikováno v:
Doklady Biochemistry and Biophysics. 404:336-338
Development of biomaterials that accelerate adaptation of artificial implants to living tissues and extend implant service is the field at the turn of current biology and material authority, which is now booming. The surface of implants operating und