Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Csaba Dücső"'
Autor:
Nikolay Samotaev, Pavel Dzhumaev, Konstantin Oblov, Alexander Pisliakov, Ivan Obraztsov, Csaba Ducso, Ferenc Biro
Publikováno v:
Chemosensors, Vol 9, Iss 12, p 340 (2021)
A reduced size thermocatalytic gas sensor was developed for the detection of methane over the 20% of the explosive concentration. The sensor chip is formed from two membranes with a 150 µm diameter heated area in their centers and covered with highl
Externí odkaz:
https://doaj.org/article/bcf34b6442194f5dbad69a497272ac57
Autor:
János Radó, Csaba Dücső, Péter Földesy, István Bársony, Kamil Rohr, Lukasz Mucha, Krzysztof Lis, Wojciech Sadowski, Dariusz Krawczyk, Piotr Kroczek, Zbigniew Małota, Gábor Szebényi, Hunor Sántha, Zbigniew Nawrat, Péter Fürjes
Publikováno v:
Proceedings, Vol 2, Iss 13, p 1035 (2018)
Smart laparoscope device was developed and integrated into the ROBIN HEART surgery robot system. Miniaturised silicon based force sensors were developed and integrated into laparoscope tweezers for the special applications. Different sensors were app
Externí odkaz:
https://doaj.org/article/f304b8d1c90b44e88a7fb1c6c0b3be57
Publikováno v:
Microsystem Technologies. 28:2511-2528
Due to their complex electro-thermal characteristics microhotplates used in environmental gas sensors require careful design to exhibit uniform temperature and low power dissipation during the expected long time operation. The layout design becomes m
Publikováno v:
Journal of Electronic Materials. 47:2322-2329
This work analyses the role of phase changes in TiO2/Pt/TiO2 layer stacks for micro-heater application regarding their stability and reliable operation. The polycrystalline Pt layer wrapped in a TiO2 adhesion layer underwent a continuous recrystallis
Publikováno v:
Microelectronics Reliability. 78:118-125
This work established the correlation between the location of temperature gradients and the positions where breakdown is observed on different Pt filament layouts in cantilever and full membrane type micro-hotplates. Focusing on practical aspects lik
Publikováno v:
Sensors and Actuators B: Chemical. 247:617-625
Explosion alarm in atmospheric condition requires detection of hydrocarbons at the level of volume percent concentration range. This is best achieved by the combustion type detection, contrary to the available sensitive conductive type sensors, which
Autor:
János Radó, Gábor Szebényi, Péter Fürjes, Csaba Dücső, Kamil Rohr, Péter Földesy, Zbigniew Nawrat
Publikováno v:
Microsystem Technologies. 24:519-525
3D force sensors were developed and integrated in a laparoscope grasping head of the Robin Heart surgery robot to provide additional tactile and force feedback to the surgeon. The Si sensors operate with piezoresistive transduction principle by measu
Publikováno v:
Materials Today: Proceedings. 4:7107-7113
LEDs have narrow radiation bandwidth which should be broadened for use them in near infrared spectroscopy. The well-known methods are not satisfactory for this purpose. We modified the output spectrum of the GaInAsP/InP LED chip by introducing wavele
Publikováno v:
Materials Research Bulletin. 84:480-485
Hydrothermally grown hexagonal WO 3 nano-rods were sensitized by additional Pt and Au nano-particles. The size of the 20–29 nm noble metal nano-particles were stabilized with methoxy-polyethylene glycol, and their solution was mixed with the tungst
Autor:
Dariusz Krawczyk, Csaba Dücső, Wojciech Sadowski, Zbigniew Nawrat, Gábor Szebényi, Piotr Kroczek, Péter Fürjes, Kamil Rohr, Hunor Santha, István Bársony, Péter Földesy, Lukasz Mucha, Krzysztof Lis, János Radó, Z. Malota
Publikováno v:
Proceedings, Vol 2, Iss 13, p 1035 (2018)
Smart laparoscope device was developed and integrated into the ROBIN HEART surgery robot system. Miniaturised silicon based force sensors were developed and integrated into laparoscope tweezers for the special applications. Different sensors were app