Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Colin Madew"'
Autor:
Alec McLennan, Colin Madew, Mark Kirkham, Chris Currie, Ben Coult, Tom Schofield, Karen Cooper, Russell Smith, Peter Gill, Matt Sutcliffe, Paul Onwuarolu
Publikováno v:
Volume 1: Codes and Standards.
A significant amount of fatigue testing has taken place over the years to generate relationships between applied stress or strain range and cycles to failure. This has mainly been conducted on uniaxial test specimens in an air environment. More recen
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0746d8be17edc001b49611e6e3f0f59c
https://doi.org/10.1115/pvp2021-62429
https://doi.org/10.1115/pvp2021-62429
Publikováno v:
Volume 6B: Materials and Fabrication.
A leak detection assessment at a circumferential weld has been carried out to support a Leak-before-Break argument. This was performed using detailed finite element analysis (FEA) of the component to determine limiting defect sizes and crack opening
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dd6096e6e9c31752d3bda06d070d6a65
https://doi.org/10.1115/pvp2017-65985
https://doi.org/10.1115/pvp2017-65985
Publikováno v:
Volume 1A: Codes and Standards.
This paper considers finite element analyses that have been performed to support a fatigue endurance testing programme. This programme is aimed at understanding the influence of Light Water Reactor (LWR) environment on the fatigue life of austenitic
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::34789249040d23271e805e183cf298fe
https://doi.org/10.1115/pvp2017-65975
https://doi.org/10.1115/pvp2017-65975
Publikováno v:
Volume 6A: Materials and Fabrication.
As part of the recent STYLE European project, three large scale mock-up experiments (Mock-up 1, Mock-up 2 and Mock-up 3) were performed. The Mock-ups were representative of nuclear power plant locations containing welds or cladding and contained an i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f0cd165654f0e51e92bd628a9ae9ff9a
https://doi.org/10.1115/pvp2014-28404
https://doi.org/10.1115/pvp2014-28404
Publikováno v:
Volume 6A: Materials and Fabrication.
One of the large scale mock-up experiments (Mock-Up 2) of the recent STYLE European project was a ductile fracture test carried out on a pipe containing a circumferential through-wall crack located in a repair weld and loaded under four-point bending
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e1cbf02299af8c7059c7063dd5a19433
https://doi.org/10.1115/pvp2014-28406
https://doi.org/10.1115/pvp2014-28406
Autor:
Peter James, Colin Madew
Publikováno v:
Volume 6: Materials and Fabrication, Parts A and B.
Engineering components may contain small crack-like defects that experience combinations of primary and secondary stresses during service. A new formalism of the R6 V factor, Vg, has been introduced over previous years to quantify the influence of pl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ee6dbdf67862c3f885b748d79fbc3a4d
https://doi.org/10.1115/pvp2012-78464
https://doi.org/10.1115/pvp2012-78464
Publikováno v:
Volume 6: Materials and Fabrication, Parts A and B.
Plants in safety-critical industries comprise of a number of different components, including various sizes of pressure vessels, and their integrity is often paramount to the safe running of the plant. In many cases these vessels can contain highly co
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1555d8f6302cd870b550052992e48eaf
https://doi.org/10.1115/pvp2012-78476
https://doi.org/10.1115/pvp2012-78476
Publikováno v:
Volume 6: Materials and Fabrication, Parts A and B.
Engineering components which are considered in safety case assessments contain either real or hypothetical crack-like defects that experience combinations of primary and secondary stresses during service. A number of assessment procedures contain sim
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::26fd0d3407fb615932e89ebc6add238a
https://doi.org/10.1115/pvp2012-78722
https://doi.org/10.1115/pvp2012-78722
Publikováno v:
Volume 6: Materials and Fabrication, Parts A and B.
Engineering components, particularly those containing weldments, may contain small crack-like defects that experience combinations of primary and secondary stresses during service. A new function, g(), has been introduced previously to quantify the i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e34f9a3cd4059430d194307b231aeef1
https://doi.org/10.1115/pvp2011-57259
https://doi.org/10.1115/pvp2011-57259
Publikováno v:
Volume 6: Materials and Fabrication, Parts A and B.
A number of papers have been presented at previous ASME PVP conferences, which have evaluated the crack opening areas (COA) and stress intensity factors (K), using elastic finite element analysis techniques, for through-wall cracks in a region where
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::73073942754f2380fd491e554152ccd5
https://doi.org/10.1115/pvp2011-57312
https://doi.org/10.1115/pvp2011-57312