Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Christoph Ebbert"'
Autor:
Steffen Wackenrohr, Christof Johannes Jaime Torrent, Sebastian Herbst, Florian Nürnberger, Philipp Krooss, Johanna-Maria Frenck, Christoph Ebbert, Markus Voigt, Guido Grundmeier, Thomas Niendorf, Hans Jürgen Maier
Publikováno v:
npj Materials Degradation, Vol 8, Iss 1, Pp 1-7 (2024)
Abstract Due to its excellent biocompatibility, pure iron is a very promising implant material, but often features corrosion rates that are too low. Using additive manufacturing and modified powders the microstructure and, thus, the material properti
Externí odkaz:
https://doaj.org/article/96997c834c0e44f289d9c72d72b515e7
Autor:
Steffen Wackenrohr, Christof Johannes Jaime Torrent, Sebastian Herbst, Florian Nürnberger, Philipp Krooss, Christoph Ebbert, Markus Voigt, Guido Grundmeier, Thomas Niendorf, Hans Jürgen Maier
Publikováno v:
npj Materials Degradation, Vol 6, Iss 1, Pp 1-13 (2022)
Abstract Pure iron is very attractive as a biodegradable implant material due to its high biocompatibility. In combination with additive manufacturing, which facilitates great flexibility of the implant design, it is possible to selectively adjust th
Externí odkaz:
https://doaj.org/article/15411f0b4ab14089a2f7326a96a75d93
Autor:
Belma Duderija, Alejandro González-Orive, Christoph Ebbert, Vanessa Neßlinger, Adrian Keller, Guido Grundmeier
Publikováno v:
Molecules, Vol 28, Iss 13, p 5109 (2023)
This article presents the potential-dependent adsorption of two proteins, bovine serum albumin (BSA) and lysozyme (LYZ), on Ti6Al4V alloy at pH 7.4 and 37 °C. The adsorption process was studied on an electropolished alloy under cathodic and anodic o
Externí odkaz:
https://doaj.org/article/acc612eb9e00495ca1793f4ac242ec68
Autor:
Grundmeier, Belma Duderija, Alejandro González-Orive, Christoph Ebbert, Vanessa Neßlinger, Adrian Keller, Guido
Publikováno v:
Molecules; Volume 28; Issue 13; Pages: 5109
This article presents the potential-dependent adsorption of two proteins, bovine serum albumin (BSA) and lysozyme (LYZ), on Ti6Al4V alloy at pH 7.4 and 37 °C. The adsorption process was studied on an electropolished alloy under cathodic and anodic o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=multidiscipl::e01a2deb346e052b3d6fd6368305b12e
Autor:
Jingyuan Huang, Markus Voigt, Steffen Wackenrohr, Christoph Ebbert, Adrian Keller, Hans Jürgen Maier, Guido Grundmeier
Publikováno v:
Materials and Corrosion. 73:1034-1044
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::44f656d4f8cf19c12229a42af8e879ec
https://doi.org/10.1002/maco.202112841
https://doi.org/10.1002/maco.202112841
Autor:
Guido Grundmeier, Olaf Keßler, Benjamin Milkereit, Evgeny Zhuravlev, Markus Voigt, Bin Yang, P. Vieth, Christoph Ebbert
Publikováno v:
Procedia CIRP. 94:17-20
For laser powder bed fusion (LPBF), particularly during solidification after the laser melting process the generation of high-strength aluminium materials (such as Al-7075) possesses a particular challenge, since the high energy input often causes de
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8bbda4cd8400f2223caf2b8f9907417b
https://doi.org/10.1016/j.procir.2020.09.004
https://doi.org/10.1016/j.procir.2020.09.004
Autor:
Christof J. J. Torrent, Philipp Krooß, Jingyuan Huang, Markus Voigt, Christoph Ebbert, Steffen Knust, Guido Grundmeier, Thomas Niendorf
Publikováno v:
Alloys; Volume 1; Issue 1; Pages: 31-53
Additive manufacturing (AM) processes are not solely used where maximum design freedom meets low lot sizes. Direct microstructure design and topology optimization can be realized concomitantly during processing by adjusting the geometry, the material
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8fffb46d8250bffd814c745078d29f1e
Autor:
Hans Christian Schmidt, Hans Juergen Maier, Guido Grundmeier, R. Grothe, Illia Hordych, Christoph Ebbert, Christian Hoppe, Werner Homberg
Publikováno v:
Advanced Engineering Materials. 18:1371-1380
The influence of a chemical or mechanical surface modification followed by different post-heat treatments on the bond strength of galvanized steel/ aluminum composites is studied. An incremental rolling process is used for joint formation based on pl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7db781250befe806cab54792c702dd57
https://doi.org/10.1002/adem.201600085
https://doi.org/10.1002/adem.201600085
Autor:
Dmytro Rodman, Hans Juergen Maier, Christoph Ebbert, Werner Homberg, Markus Voigt, Christian Hoppe, Hans Christian Schmidt, Guido Grundmeier
Publikováno v:
Advanced Engineering Materials. 18:1066-1074
Interface modification based on ultra-thin mercapto-propyl(trimethoxy) silane (MPTMS) films is shown to promote joining of copper and aluminum by plastic deformation followed by a heat treatment. The surface morphology and the surface chemistry of th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::75e2149b6675b4bfa707a99709134f1b
https://doi.org/10.1002/adem.201500501
https://doi.org/10.1002/adem.201500501
Autor:
Christoph Ebbert, Hans Jürgen Maier, Guido Grundmeier, Dmytro Rodman, Werner Homberg, Hans Christian Schmidt
Publikováno v:
Key Engineering Materials. :1421-1426
Joining materials by forming is an interesting approach to the manufacture of hybrid (multi material) parts. By establishing a cold pressure weld between metallic surfaces, high quality joints with superior properties can be achieved. Reliable cold w
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::847e99e6600966ec9a3ee85cf0eb8acd
https://doi.org/10.4028/www.scientific.net/kem.651-653.1421
https://doi.org/10.4028/www.scientific.net/kem.651-653.1421