Zobrazeno 1 - 10
of 131
pro vyhledávání: '"Chmiela B."'
Publikováno v:
Journal of Mining and Metallurgy. Section B: Metallurgy, Vol 57, Iss 3, Pp 371-378 (2021)
Using a reduced pressure during the smelting and refining of alloys removes dissolved gasses, as well as impurities with a high vapor pressure. When smelting is carried out in vacuum induction furnaces, the intensification of the discussed processes
Externí odkaz:
https://doaj.org/article/df637b58b429458199b2d0a15d417285
Publikováno v:
Archives of Metallurgy and Materials, Vol 62, Iss 2, Pp 557-562 (2017)
The article shows that the use of quantitative fracture description may lead to significant progress in research on the phenomenon of stress corrosion cracking of the WE43 magnesium alloy. Tests were carried out on samples in air, and after hydrogena
Externí odkaz:
https://doaj.org/article/1f9d4c92d92a4556b0d350713841b63d
Publikováno v:
Archives of Metallurgy and Materials, Vol 62, Iss 1, Pp 241-245 (2017)
Turbine blades are flight safety parts in the jet engine. Therefore they should be characterized by very good mechanical properties, especially high creep resistance and fatigue strength at high temperature. The mechanical properties of blades made o
Externí odkaz:
https://doaj.org/article/cf40e9471e40446890e44180f66a803f
Autor:
Michalik R., Chmiela B.
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 3, Pp 1581-1586 (2016)
The influence of solution heat treatment at 385°C over 10 h with cooling in water on the structure, hardness and strength of the ZnAl22Cu3 eutectoid alloy is presented in the paper. The eutectoid ZnAl22Cu3 alloy is characterized by a dendritic struc
Externí odkaz:
https://doaj.org/article/034adeb05bfd404ba5979b4d5c2451b8
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 1, Pp 393-398 (2016)
It is well known that the properties of a metal matrix composites depend upon the properties of the reinforcement phase, of the matrix and of the interface. A strong interface bonding without any degradation of the reinforcing phase is one of the pri
Externí odkaz:
https://doaj.org/article/b0c1bb88b62c4964a1356c9593f8fd5f
Autor:
Michalik R., Chmiela B.
Publikováno v:
Archives of Metallurgy and Materials, Vol 60, Iss 2, Pp 621-626 (2015)
Zn-Al alloys are mainly used due to their high tribological and damping properties. A very important issue is determination of the hardness of the phases present in the Zn-Al-Cu alloys. Unfortunately, in literature there is lack of studies on the har
Externí odkaz:
https://doaj.org/article/37552fbb7da648f185c321d6fc36991f
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
The r esults are based on two experimental high-manganese X98MnAlSiNbTi24-11 and X105MnAlSi24-11 steels subjected to thermo-mechanical treatment by hot-rolling on a semi-industrial processing line. The paper presents the results of diffraction and st
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=od______4084::0086bab630028979a9daf047b09e9193
http://hdl.handle.net/20.500.12128/8798
http://hdl.handle.net/20.500.12128/8798
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.