Zobrazeno 1 - 10
of 32
pro vyhledávání: '"Chih-Yeh Chao"'
Autor:
Huey-Er Lee, Ju-Hui Wu, Chih-Yeh Chao, Yen-Hao Chang, Je-Kang Du, Ker-Kong Chen, Huey-Ming Chen
Publikováno v:
Materials, Vol 13, Iss 24, p 5694 (2020)
The microstructural characteristics and Young’s modulus of the as-cast Ti–15Ta–15Nb alloy are reported in this study. On the basis of the examined XRD and TEM results, the microstructure of the current alloy is essentially a mixture (α + β+
Externí odkaz:
https://doaj.org/article/7537dbeb07c54dc99236cc0607f171bf
Autor:
Je-Kang Du, Chih-Yeh Chao, Lin-Lung Wei, Chau-Hsiang Wang, Jeng-Huey Chen, Ker-Kong Chen, Ruei-Bin Huang
Publikováno v:
Metals, Vol 11, Iss 1, p 23 (2020)
The effects of the addition of silver on the microstructural variation and antibacterial performance of 2205 duplex stainless steel after solution and aging treatment were investigated by scanning electron microscopy (SEM), transmission electron micr
Externí odkaz:
https://doaj.org/article/1c4c2c5c9f7d499e898b9c9e78a9c3db
Publikováno v:
Metals, Vol 11, Iss 1, p 43 (2020)
The aim of this study was to investigate the effect of incorporating low copper (0, 0.5, 1, 1.5, and 2 wt.%) additions into as-forged AISI 304 stainless steel (304SS). The microstructures and mechanical properties of the steel were examined using sca
Externí odkaz:
https://doaj.org/article/5a34886c7fda44d2808cfb36cd0bf6d0
Publikováno v:
Materials, Vol 13, Iss 13, p 3039 (2020)
To control the degradation rate of magnesium (Mg) alloys, chitosan (CHI) and L-glutamic acid (LGA) were used as coatings on Mg-Zn-Ca alloys via dip coating. In this study, either two or seven CHI/LGA layers were applied as a coating on Mg-2.8Zn-0.8Ca
Externí odkaz:
https://doaj.org/article/7068478948784a4fb9f7bab96b92eb76
Publikováno v:
Metals, Vol 10, Iss 7, p 858 (2020)
Titanium alloys are widely employed for the fabrication of biomedical devices. In this study, we designed and developed a Ti-5Al-2.5Cu alloy, which exhibited antibacterial properties. Microstructure and elemental analyses were performed using X-ray d
Externí odkaz:
https://doaj.org/article/f6c6986ce02d4182a64bc82aaf40b646
Autor:
Tai-You Liu, Jacob C. Huang, Wen-Shuo Chuang, Hung-Sheng Chou, Jui-Yu Wei, Chih-Yeh Chao, Yu-Chin Liao, Jason S.C. Jang
Publikováno v:
Materials, Vol 12, Iss 21, p 3508 (2019)
In this study, the effects of spinodal decomposition on the microstructures and mechanical properties of a TiZrNbTa alloy are investigated. The as-cast TiZrNbTa alloy possesses dual phases of TiZr-rich inter-dendrite (ID) and NbTa-rich dendrite (DR)
Externí odkaz:
https://doaj.org/article/482c08268df9417baa723fe429cab725
Autor:
Je-Kang Du, Chih-Yeh Chao, Kuan-Yu Chiu, Yen-Hao Chang, Ker-Kong Chen, Ju-Hui Wu, Juyn-Nan Wu
Publikováno v:
Metals, Vol 7, Iss 12, p 566 (2017)
Currently, the development of biomaterials has focused on having a low Young’s modulus, biocompatibility, corrosion resistance, and antibacterial properties. Ti–Nb alloys have higher research value due to their excellent corrosion resistance and
Externí odkaz:
https://doaj.org/article/ae7288f7c28844aeb101b8d1833d3491
Publikováno v:
Metals, Vol 6, Iss 4, p 73 (2016)
Based on their mechanical properties and good corrosion resistance, some commercial Ni-Cr stainless steels have been widely applied as biomaterials, including the austenitic 304 stainless steel, the austenitic 316 stainless steel, the duplex 2205 sta
Externí odkaz:
https://doaj.org/article/855504cb36c14a45910bbca3cc49111a
Publikováno v:
The Journal of Dentists. 10:1-6
The purpose of this study was to investigate the corrosion behavior of four different dental casting alloys in artificial saliva solutions with varying pH values. Microstructures were observed using scanning electron microscopy. The corrosion behavio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4b6c3c198985b4e10f630970c7938481
https://doi.org/10.12974/2311-8695.2022.10.1
https://doi.org/10.12974/2311-8695.2022.10.1
Publikováno v:
Metals, Vol 11, Iss 43, p 43 (2021)
Metals
Volume 11
Issue 1
Metals
Volume 11
Issue 1
The aim of this study was to investigate the effect of incorporating low copper (0, 0.5, 1, 1.5, and 2 wt.%) additions into as-forged AISI 304 stainless steel (304SS). The microstructures and mechanical properties of the steel were examined using sca
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a2501d2a8d2c8010e8d9bd911900aa09
https://www.mdpi.com/2075-4701/11/1/43
https://www.mdpi.com/2075-4701/11/1/43