Zobrazeno 1 - 10
of 23
pro vyhledávání: '"Chandra S. Perugu"'
Autor:
Abhishek Pariyar, Evren Yasa, Adrian Sharman, Chandra S. Perugu, Liang Yuan, James Hughes, Dikai Guan
Publikováno v:
Materials & Design, Vol 245, Iss , Pp 113238- (2024)
Additive friction stir deposition (AFSD), a solid-state additive manufacturing technique, has excellent industrial application potential, particularly for Al alloys. However, in-depth process parameter-microstructure-property correlations are lacking
Externí odkaz:
https://doaj.org/article/0aa07e20f865426fbbc3e8e26f766d1d
Autor:
Bindu Gutta, Prashant Huilgol, Chandra S. Perugu, Govind Kumar, S. Tejanath Reddy, Laszlo S. Toth, Olivier Bouaziz, Satish V. Kailas
Publikováno v:
Materials, Vol 17, Iss 1, p 84 (2023)
In this investigation, an attempt was made to develop a new high-strength and high-ductility aluminum metal–matrix composite. It was achieved by incorporating ceramic reinforcement into the metal which was formed in situ from a polymer by pyrolysis
Externí odkaz:
https://doaj.org/article/f086563a6c7b4056b5822d5a6eea7c2d
Publikováno v:
Manufacturing Letters. 35:33-38
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7af874385fcd4034c9bd26e30211d90a
https://doi.org/10.1016/j.mfglet.2022.11.005
https://doi.org/10.1016/j.mfglet.2022.11.005
Publikováno v:
Journal of Manufacturing Processes. 69:473-490
The Al6061-ZrB2 metal matrix composites were prepared by stir-casting approach via in-situ reaction, using aluminium master alloys comprising 3% Boron and 10% Zirconium. Developed in-situ composites were rolled at a temperature of 400 °C. Both the a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::05979a44632204da42e1f9a7d5d7d8f2
https://doi.org/10.1016/j.jmapro.2021.07.058
https://doi.org/10.1016/j.jmapro.2021.07.058
Publikováno v:
JOM. 73:1428-1439
A challenge for the research and industrial community is to develop lightweight wrought Mg-based alloys that exhibit high strength and good ductility. To address this challenge, Mg-3Sn-2Al (TA32) alloy was produced by the squeeze casting process foll
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9aaea919d4be893025e7ef8b311bf175
https://doi.org/10.1007/s11837-021-04615-z
https://doi.org/10.1007/s11837-021-04615-z
Publikováno v:
Advances in Materials and Processing Technologies. 8:259-268
As cast Al-Mg-Si alloy was hot-rolled at a temperature of 400 ° C. After rolling, the alloy was subjected to T6 heat treatment by solutionising at 530 ° C for 2 hours followed by quenching in water...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6e2711915413dd19bb5c9d56a62b4e3d
https://doi.org/10.1080/2374068x.2020.1796463
https://doi.org/10.1080/2374068x.2020.1796463
Publikováno v:
Metallurgical and Materials Transactions A. 51:4086-4099
Hybrid nanocomposites have potential as wear-resistant materials. However, synthesizing these nanocomposites by conventional molten state methods result in agglomeration of reinforcements. To mitigate this issue, in the current study hybrid aluminum
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2ad346383e9d24f99941ee9f5dd48848
https://doi.org/10.1007/s11661-020-05821-1
https://doi.org/10.1007/s11661-020-05821-1
Publikováno v:
JOM. 72:1627-1637
The effect of ternary zinc (Zn) addition to two-phase magnesium-lithium alloys on the evolution of their microstructure, texture and tensile properties has been investigated. It was observed that the volume fraction of hexagonal close-packed α phase
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3f21bde0667dfe5f700a923da915c914
https://doi.org/10.1007/s11837-020-04040-8
https://doi.org/10.1007/s11837-020-04040-8
Autor:
Aman Gupta, Krishna Kamlesh Verma, Ranjeet Kumar, Chandra S. Perugu, Mattipally Prasad, Shavi Agrawal, Rajesh Khatirkar
Publikováno v:
SSRN Electronic Journal.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f7b16735990e4e214bb3afb9399cf113
https://doi.org/10.2139/ssrn.4084714
https://doi.org/10.2139/ssrn.4084714
Autor:
Padaikathan -. P, Chandra S. Perugu, Eyerus Mulugeta Cheksa, Manu S. Mohan, Olu Emmanuel Femi
Publikováno v:
Journal of Alloys and Compounds. 907:164427
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::31cbd8b785511d2e456dff8ca6989163
https://doi.org/10.1016/j.jallcom.2022.164427
https://doi.org/10.1016/j.jallcom.2022.164427