Zobrazeno 1 - 8
of 8
pro vyhledávání: '"Chamini L. Mendis"'
Publikováno v:
Crystals, Vol 13, Iss 6, p 882 (2023)
Magnesium alloys can be used in a wide range of applications, from lightweight structural and transport applications to biomaterials [...]
Externí odkaz:
https://doaj.org/article/c4585072005b44a1a3566f3de23e86ba
Autor:
Zhongping Que, Yun Wang, Chamini L. Mendis, Changming Fang, Junhai Xia, Xiaorong Zhou, Zhongyun Fan
Publikováno v:
Metals, Vol 12, Iss 10, p 1677 (2022)
Control of Fe in Al alloys is a severe challenge for the full metal circulation to produce the recycled alloys with mechanical and physical performance as high as the primary alloys. The high restriction of Fe content is mainly due to the deteriorati
Externí odkaz:
https://doaj.org/article/4fb1c6b710c9464199322e19a25baac6
Autor:
Maria del Rosario Silva Campos, Carsten Blawert, Chamini L. Mendis, Marta Mohedano, Tristan Zimmermann, Daniel Proefrock, Mikhail L. Zheludkevich, Karl Ulrich Kainer
Publikováno v:
Frontiers in Materials, Vol 7 (2020)
In 0.5 wt.% NaCl aqueous solution, Mg-10Gd alloy shows promising corrosion resistance. The microstructure of this alloy was modified via heat treatments to understand the effect of accompanying microstructural changes on the corrosion resistance. It
Externí odkaz:
https://doaj.org/article/65b099c401f34b2393298b957d994f1e
Publikováno v:
Materials & Design, Vol 187, Iss , Pp - (2020)
The microstructure evolution and mechanical properties of recently developed die-cast Al-Si-Mg-Mn alloys were investigated. CALPHAD modelling, based on the thermodynamic database, was carried out to design Al-Si-Mg-Mn alloys with different solid frac
Externí odkaz:
https://doaj.org/article/a93d2ae110f641b2922789e01539eddf
Autor:
Qing Cai, Brian Cantor, Vivian S. Tong, Feng Wang, Chamini L. Mendis, Isaac T.H. Chang, Zhongyun Fan
Publikováno v:
Metals, Vol 12, Iss 1, p 7 (2021)
The microstructure evolution and mechanical properties of quaternary Al-Cu-Si-Mg eutectic alloy prepared via arc melting and suction casting were studied. This alloy exhibits a single endothermic DSC peak with a melting temperature of 509 °C upon he
Externí odkaz:
https://doaj.org/article/65534efea2054244bcbf2c1587f9de8b
Publikováno v:
Materials & Design, Vol 179, Iss , Pp - (2019)
A novel melt conditioned twin roll casting (MCTRC) strategy with emphasis on solidification control has been investigated for producing thin gauge Mg alloy sheets ready for component forming, with the minimal requirement of down-stream processing. Th
Externí odkaz:
https://doaj.org/article/41b5259a1e4945eaa7fe9b8158375784
Autor:
Ricardo Henrique Buzolin, Leandro Henrique Moreno Guimaraes, Julián Arnaldo Ávila Díaz, Erenilton Pereira da Silva, Domonkos Tolnai, Chamini L. Mendis, Norbert Hort, Haroldo Cavalcanti Pinto
Publikováno v:
Crystals, Vol 10, Iss 12, p 1140 (2020)
The deformation behaviour of as-cast ZK40 alloys modified with individual additions of Ca and Gd is investigated at 250 °C and 300 °C. Compression tests were carried out at 0.0001 s−1 and 0.001 s−1 using a modified Gleeble system during in-situ
Externí odkaz:
https://doaj.org/article/9d8f2acd01b54e54b87e4ae3fc8ae2d1
Publikováno v:
Metals, Vol 8, Iss 8, p 640 (2018)
To improve the mechanical and corrosion properties of Mg10Gd, Nd and La are added, and from that, the influence of precipitation hardening was studied. An increase in strength, by decreasing grain size and increasing the volume fraction of Rare Earth
Externí odkaz:
https://doaj.org/article/5ee8690e982c433a9bd9005f23c98e66