Zobrazeno 1 - 10
of 40
pro vyhledávání: '"Caton‐Rose, Phil"'
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Yes
Ultrahigh molecular weight polyethylene (UHMWPE) is one of the most promising polyolefins, but its processability and consequently applications are limited by its high melt viscosity. An effective method to improve the processability is to i
Ultrahigh molecular weight polyethylene (UHMWPE) is one of the most promising polyolefins, but its processability and consequently applications are limited by its high melt viscosity. An effective method to improve the processability is to i
Externí odkaz:
http://hdl.handle.net/10454/20146
Yes
Pre-oriented poly (4-methyl-1-pentene) samples were prepared by the die drawing process. The stress whitening phenomenon induced by cavities in the different die drawn P4M1P samples during the second-stage tensile deformation was investigate
Pre-oriented poly (4-methyl-1-pentene) samples were prepared by the die drawing process. The stress whitening phenomenon induced by cavities in the different die drawn P4M1P samples during the second-stage tensile deformation was investigate
Externí odkaz:
http://hdl.handle.net/10454/20147
Autor:
Innes, James R., Shriky, Banah, Allan, S., Wang, X., Hebda, Michael J., Coates, Philip D., Whiteside, Benjamin R., Benkreira, Hadj, Caton-Rose, Philip D., Lu, C.H., Wang, Q., Kelly, Adrian L.
Yes
Natural rubber (NR) and crosslinked polyethylene (XLPE) waste streams were devulcanized by solid state shear milling (S3M), producing a fine powder that may be more easily reprocessed. Understanding devulcanization and the nature of decrossl
Natural rubber (NR) and crosslinked polyethylene (XLPE) waste streams were devulcanized by solid state shear milling (S3M), producing a fine powder that may be more easily reprocessed. Understanding devulcanization and the nature of decrossl
Externí odkaz:
http://hdl.handle.net/10454/18836
Autor:
Ambardekar, Rohan, Karandikar, Hrushikesh, Kelly, Adrian, Caton-Rose, Phil, Coates, Phil, Paradkar, Anant
Publikováno v:
AIP Conference Proceedings; 2015, Vol. 1664 Issue 1, p1-5, 5p, 1 Diagram, 3 Graphs
Autor:
Lyu, D., Sun, Y.Y., Lai, Y.Q., Thompson, Glen P., Caton-Rose, Philip D., Coates, Philip D., Lu, Y., Men, Y.F.
Yes
The isotactic polypropylene (iPP) usually shows a unique parent-daughter lamellae structure in which the parent and daughter lamellae are against each other with a near perpendicular angle (80° or 100°). Inducing a high fraction of oriente
The isotactic polypropylene (iPP) usually shows a unique parent-daughter lamellae structure in which the parent and daughter lamellae are against each other with a near perpendicular angle (80° or 100°). Inducing a high fraction of oriente
Externí odkaz:
http://hdl.handle.net/10454/18318
Autor:
Lyu, D., Sun, Y., Lu, Y., Liu, L., Chen, R., Thompson, Glen P., Caton-Rose, Philip D., Coates, Philip D., Wang, Y., Men, Y.
Yes
Cavitation is an important phenomenon in solid-phase deformation of polymers, which either has potential adverse effects on physical properties or creates potential opportunities for new properties. In either case, it needs to be better unde
Cavitation is an important phenomenon in solid-phase deformation of polymers, which either has potential adverse effects on physical properties or creates potential opportunities for new properties. In either case, it needs to be better unde
Externí odkaz:
http://hdl.handle.net/10454/18314
Yes
By controlling the crystallization behavior of poly(lactic acid) (PLA) in the presence of a hydrazide nucleating agent (HNA), PLA-HNA foams with enhanced microcellular structures were prepared via supercritical CO2 foaming. It was found that
By controlling the crystallization behavior of poly(lactic acid) (PLA) in the presence of a hydrazide nucleating agent (HNA), PLA-HNA foams with enhanced microcellular structures were prepared via supercritical CO2 foaming. It was found that
Externí odkaz:
http://hdl.handle.net/10454/18317
Yes
A novel fully biosbased poly(lactic acid)-b-poly(lactide-co-caprolactone) (PLA-b-PLCL) with a two-phase structure and long-chain branches was specifically designed and prepared through reactive melt processing. The results showed that PLCL s
A novel fully biosbased poly(lactic acid)-b-poly(lactide-co-caprolactone) (PLA-b-PLCL) with a two-phase structure and long-chain branches was specifically designed and prepared through reactive melt processing. The results showed that PLCL s
Externí odkaz:
http://hdl.handle.net/10454/18311
Autor:
Hebda, Michael J., McIlroy, C., Whiteside, Benjamin R., Caton-Rose, Philip D., Coates, Philip D.
Yes
In recent years 3D printing has gained popularity amongst industry professionals and hobbyists alike, with many new types of Fused Filament Fabrication (FFF) apparatus types becoming available on the market. A massively overlooked component
In recent years 3D printing has gained popularity amongst industry professionals and hobbyists alike, with many new types of Fused Filament Fabrication (FFF) apparatus types becoming available on the market. A massively overlooked component
Externí odkaz:
http://hdl.handle.net/10454/16895