Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Carl Perrin"'
Publikováno v:
Acoustics, Vol 5, Iss 3, Pp 714-745 (2023)
Welding inspection is a critical process that can be severely time-consuming, resulting in productivity delays, especially when destructive or invasive processes are required. This paper defines the novel approach to investigate the physical correlat
Externí odkaz:
https://doaj.org/article/9dedc5de5fee4f1ca321e4c642fd25e0
Publikováno v:
Materials Science Forum. :1071-1076
Microscale fatigue damage mechanisms in various Al-Sn-Si based bearing alloys used as linings of plain automotive bearings are reported. Extensive work on previously developed alloys has concluded that secondary phase particles such as Sn and Si are
Publikováno v:
Scopus-Elsevier
Al-Sn, Al-Sn-Cu and Al-Sn-Cu-Si alloys are employed in the production of shell bearings for use in automotive engines. These bearings are normally produced by casting and roll bonding on to a steel backing. An alternative direct form of manufacture h
Autor:
Carl Perrin, W.M. Rainforth
Publikováno v:
Wear. :171-179
In order to predict the ability of a material to support the load applied at asperities, the flow stress of the surface regions must be known. However, there is little quasitative data on the work hardening behaviour resulting from plastic sliding co
Autor:
Carl Perrin, W.M. Rainforth
Publikováno v:
Wear. :312-324
The effect of reinforcement by a twenty volume percent Saffil preform (S-Al 2 O 3 fibres) on the wear of a binary Al-4.3%Cu alloy has been investigated under both dry and lubricated sliding. Wear testing was undertaken on a tri-pin-on-disc machine ov
Publikováno v:
International Thermal Spray Conference.
Gas turbine efficiency is of paramount importance in the modern carbon conscious global economy and the industry is always looking for ways to improve the efficiency of gas turbine engines. Gas bypass between the rotating turbine blade tip and the en
Autor:
Arnoldo Bedolla-Jacuinde, Quanshun Luo, A. J. Leonard, Yun Wang, Carl Perrin, W.M. Rainforth, H. Jones
A detailed transmission electron microscopy study of oxide and oxygen-containing phase formation during the sliding wear of metals, composites and coatings is provided. A wide range of different materials types are reported in order to compare and co
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::965f3e09034cea47429c0f7307a5e2bf
https://shura.shu.ac.uk/2509/3/Luo-HighResolutionObservations(AM).pdf
https://shura.shu.ac.uk/2509/3/Luo-HighResolutionObservations(AM).pdf
The dry and oil lubricated sliding wear behaviour of a eutectic, squeeze cast A1-11.7%Si, conventionally cast Al-18.6%Si (A518) and spray cast Al-20.6%Si-5%Fe-2%Ni-1%Cu (Dispal) is reported. Wear tests were undertaken on either a tri-pin-on-disc mach
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1e41f86c8883577954db0843b870ce44
https://doi.org/10.1016/s0167-8922(02)80031-1
https://doi.org/10.1016/s0167-8922(02)80031-1
Publikováno v:
Scopus-Elsevier
The sliding wear behaviour of a commercial (Duralcan) metal matrix composite containing 30 vol.-%SiC particles, and that of the unreinforced A357 matrix alloy were investigated in the load range 6-74 N and a sliding speed of 1 m s−1 against a grey
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8cd36ca1b4e4f2cfbcec2389f6bd92fa
http://www.scopus.com/inward/record.url?eid=2-s2.0-0001180468&partnerID=MN8TOARS
http://www.scopus.com/inward/record.url?eid=2-s2.0-0001180468&partnerID=MN8TOARS
Publikováno v:
Scopus-Elsevier
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::9ec399f913e64929d975e4610f8e2a5f
http://www.scopus.com/inward/record.url?eid=2-s2.0-0036882477&partnerID=MN8TOARS
http://www.scopus.com/inward/record.url?eid=2-s2.0-0036882477&partnerID=MN8TOARS