Zobrazeno 1 - 10
of 25
pro vyhledávání: '"C. M. Ward-Close"'
Publikováno v:
Advanced Engineering Materials. 2:85-91
Titanium metal matrix composites (MMCs) offer potential advantages for structural applications, where they combine the high strength, high temperature capability, and oxidation resistance of titanium with an increase in stiffness provided by the cera
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f2b8464d4da6ffaacd1213e8bc2bbd1e
https://doi.org/10.1002/(sici)1527-2648(200003)2:3<85::aid-adem85>3.0.co
https://doi.org/10.1002/(sici)1527-2648(200003)2:3<85::aid-adem85>3.0.co
Autor:
C. M. Ward-Close, A. Wisbey
Publikováno v:
Materials Science and Technology. 13:349-355
Titanium alloys have poor tribological performance and there is considerable interest in producing wear resistant surfaces on titanium. An Fe-Ni alloy (IN 907) and a nickel alloy (HS 242) have been diffusion bonded to the high temperature titanium al
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::188aac484a6fba80f768a1e5308e06e5
https://doi.org/10.1179/mst.1997.13.4.349
https://doi.org/10.1179/mst.1997.13.4.349
Publikováno v:
Journal of Materials Science. 32:3089-3099
A Ti– wt% Mg (Ti–45 at% Mg) alloy produced by vapour quenching has been studied using scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, imaging parallel electron energy-loss spectroscopy and ele
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4c19994f64cd5073df823506e85b7815
https://doi.org/10.1023/a:1018682130018
https://doi.org/10.1023/a:1018682130018
Publikováno v:
Journal of Materials Science. 31:867-874
The effect of hot-pressing and annealing on precipitation in a Ti-9 wt% Mg alloy solid solution produced by quenching from the vapour phase is described. Precipitates about 20 nm diameter and over 100 nm diameter were found within the grains and at g
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::91a8ef51314e1bf99d4c79e08fbfe488
https://doi.org/10.1007/bf00352884
https://doi.org/10.1007/bf00352884
Publikováno v:
Materials Transactions, JIM. 37:389-393
The synthesis, processing and mechanical properties of the lightweight metals, aluminum, magnesium and titanium produced by powder metallurgy approaches are reviewed. Synthesis techniques to be addressed will include rapid solidification, spray depos
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a3fca7d3d2fbde7ef575b9a0607e1098
https://doi.org/10.2320/matertrans1989.37.389
https://doi.org/10.2320/matertrans1989.37.389
Autor:
C. M. Ward-Close, J. G. Robertson
Publikováno v:
Advanced Performance Materials. 3:251-262
Titanium alloy metal matrix composites reinforced with silicon carbide fibre are being evaluated for a range of highly loaded aerospace applications. Although expensive, if used selectively they can have a dramatic effect on performance and weight. T
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::09039653c9f59985d9b129f2781b6b57
https://doi.org/10.1007/bf00136790
https://doi.org/10.1007/bf00136790
Publikováno v:
Materials Science and Technology. 11:1156-1160
The effect of thermal exposure on the stability and effectiveness of carbon and TiBx coatings on σ(SM1240) fibre in a Ti–6Al–4 V metal matrix composite was studied. The results suggest that extensive loss of carbon coating starts only after cons
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7d4d998b85876214ee68dffa49f21b0f
https://doi.org/10.1179/mst.1995.11.11.1156
https://doi.org/10.1179/mst.1995.11.11.1156
Publikováno v:
Journal of Materials Science. 30:1653-1660
A Ti-6Al-4V-1B-0.5Y (wt%) alloy has been prepared by consolidation of the melt-spun alloy fibres. The microstructures of the melt-spun fibre and the consolidated alloy were examined by different techniques. It was found that in the consolidated alloy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::669799f49270dd01cca90f5a63428fbd
https://doi.org/10.1007/bf00351593
https://doi.org/10.1007/bf00351593
Publikováno v:
Scripta Metallurgica et Materialia. 32:833-838
Rapid solidification (RS) of Ti-alloys containing B has been studied for more than a decade. Now, it has been realized that addition of B to Ti-alloy decreases the density and increases the tensile strength and the specific modulus. It has been repor
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::20a3b0c01e6c4391612854290d44c6b6
https://doi.org/10.1016/0956-716x(95)93210-u
https://doi.org/10.1016/0956-716x(95)93210-u
Publikováno v:
JOM. 46:62-67
This article reviews the state of the art of continuous silicon carbide fibers for reinforcing titanium matrices, including fibers produced in the United States, the United Kingdom, and Ukraine. A new coating system has been developed, based on compl
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e4e5c04b1c4322e8be477b8a42c2929a
https://doi.org/10.1007/bf03222638
https://doi.org/10.1007/bf03222638