Zobrazeno 1 - 10
of 88
pro vyhledávání: '"C. Fonade"'
Publikováno v:
Chemical Engineering Science. 61:4982-4993
The aero-ejector, an in-house developed gas–liquid contactor, ensures an improved gas–liquid contact, favorable to a high mass transfer in a small volume: its transfer capacity enables the elimination of 90% of pollutants from gaseous effluents i
Autor:
C. Fonade, Muriel Mercier-Bonin
Publikováno v:
Biotechnology and Bioengineering
Biotechnology and Bioengineering, 2002, 80 (6), pp.610-621. ⟨10.1002/bit.10415⟩
Biotechnology and Bioengineering, Wiley, 2002, 80 (6), pp.610-621. ⟨10.1002/bit.10415⟩
Biotechnology and Bioengineering, 2002, 80 (6), pp.610-621. ⟨10.1002/bit.10415⟩
Biotechnology and Bioengineering, Wiley, 2002, 80 (6), pp.610-621. ⟨10.1002/bit.10415⟩
The effect of a gas/liquid two-phase flow on the recovery of an enzyme was evaluated and compared with standard crossflow operation when confronted with the microfiltration of a high-fouling yeast suspension. Ceramic tubular and flat sheet membranes
Publikováno v:
Biotechnology Progress. 17:1084-1092
Volatile organic compounds (VOCs), representing a wide range of products mainly generated by industrial activity, are involved in air pollution. This study deals with a new biological treatment process of gaseous effluent combining a gas/liquid conta
Publikováno v:
Water Research. 34:3460-3472
The coupling effect between the oxygen mass transfer, due to a two-phase jet aerator and the recirculating flow it generates when installed in a large vessel, is modelled using a Computational Fluid Dynamic (CFD) approach. A semi-infinite domain surr
Publikováno v:
Water Science and Technology. 42:193-200
This paper deals with the aerobic biological treatment of industrial wastewaters by aerated lagoons, when high flowrates are involved. A methodology is developed which gives the best fit between the biological reactions and the ideal hydrodynamic beh
Publikováno v:
AIChE Journal. 46:476-488
This article focuses on the characterization of slug-flow hydrodynamics in two sizes of tubular membrane diameters (6 and 15 mm) to quantify the main mechanical phenomena involved in the limitation of particle fouling during cross-flow filtration of
Publikováno v:
Chemical Engineering Journal. 72:185-193
This work has given the first insight into the mass transfer performances of a new contacting apparatus, the aero-ejector, which allows the processing of high gas-to-liquid ratios in a small sized device. Conventional liquid-side controlled oxygen tr
Publikováno v:
Biotechnology and Bioengineering. 58:47-57
This study deals with the use of an upward gas/liquid slug flow to reduce tubular mineral membrane fouling. The injection of air into the feedstream is designed to create hydrodynamic conditions that destabilize the cake layer over the membrane surfa
Publikováno v:
Chemical Engineering Science
Chemical Engineering Science, 1998, 53 (4), pp.617-627
Chemical Engineering Science, Elsevier, 1998, 53 (4), pp.617-627
Chemical Engineering Science, 1998, 53 (4), pp.617-627
Chemical Engineering Science, Elsevier, 1998, 53 (4), pp.617-627
A large number of biological processes are developed with fluidized beds as reactor. This technology allows a higher biomass retention and thus a better efficiency. Some anaerobic processes such as ethanol fermentation, anaerobic digestion or denitri
Publikováno v:
Journal of Membrane Science. 128:103-113
The study deals with the use of a gas-liquid two-phase flow to reduce tubular mineral membrane fouling by injecting air directly into the feed stream. The injected air is supposed to create complex hydrodynamic conditions inside the ultrafiltration m