Zobrazeno 1 - 10
of 24
pro vyhledávání: '"C E, Loo"'
Autor:
C. E. Loo
Publikováno v:
Mineral Processing and Extractive Metallurgy. 125:187-196
The high-temperature behaviour of reducing ferrous materials is quantified using a laboratory softening and melting test. Using a combination of standard, non-standard and quenched tests supported by optical image analysis this work has highlighted s
Autor:
Jiapei Zhao, C. E. Loo
Publikováno v:
Mineral Processing and Extractive Metallurgy. 125:165-171
It is well established that flame front speed is an important factor influencing sinter productivity, sinter quality and fuel rate. In this work, the effect of suction, coke addition and mix moisture on flame front speed was studied in a pilot-scale
Autor:
C. E. Loo, R. D. Dukino
Publikováno v:
Mineral Processing and Extractive Metallurgy. 123:191-196
Iron ore sintering is the most popular process used to produce a suitable feed for the blast furnace. With changing iron ore supplies and composition, steel mills have to continually adjust the blended ore mix composition to the sinter plant. To help
Autor:
R. D. Dukino, C. E. Loo
Publikováno v:
Mineral Processing and Extractive Metallurgy. 123:197-203
The performance of a sinter machine and the quality of the ensuing product are strongly dependent on the processes occurring in the descending flame front. As it is not possible to measure flame front properties in a sintering bed directly, embedded
Autor:
D, Hellingman, S C, Teixeira, M L, Donswijk, E J, Rijkhorst, L, Moliner, J, Alamo, C E, Loo, R A, Valdés Olmos, M P M, Stokkel
Publikováno v:
Revista espanola de medicina nuclear e imagen molecular. 36(3)
To assess the 3D geometric sampling accuracy of a new PET-guided system for breast cancer biopsy (BCB) from areas within the tumour with highIn the context of the European Union project MammoCare, a prototype semi-robotic stereotactic prototype BCB-d
Publikováno v:
Ironmaking & Steelmaking. 34:99-108
In iron ore sintering, granule deformation and compaction can be responsible for significant losses in bed voidage and green bed permeability. In this study, uniaxial compression tests have been used to examine the bed strength of granulated single a
Autor:
M E M, van der Noordaa, K E, Pengel, E, Groen, E, van Werkhoven, E J Th, Rutgers, C E, Loo, W, Vogel, M J T F D, Vrancken Peeters
Publikováno v:
European journal of surgical oncology : the journal of the European Society of Surgical Oncology and the British Association of Surgical Oncology. 41(4)
Radioactive Seed Localization with a radioactive iodine-125 seed (RSL) and Radioguided Occult Lesion Localization with 99mTechnetium colloid (ROLL) are both attractive alternatives to wire localization for guiding breast conserving surgery (BCS) of n
Publikováno v:
Ironmaking & Steelmaking. 32:468-478
Pilot scale coke ovens are widely used to produce coke samples for characterisation and also to assess the coking behaviour of coal blends. The Newcastle Technology Centre of BHP Billiton has built a sophisticated 400 kg oven, which can produce cokes
Autor:
C. E. Loo
Publikováno v:
ISIJ International. 45:436-448
The main purpose of iron ore sintering is to produce a strong agglomerate for the blast furnace. This is achieved by partially melting a sinter mix at high temperature and then allowing the melt to solidify into a bonding phase for the unreacted mate
Autor:
C. E. Loo, D. J. Wong
Publikováno v:
ISIJ International. 45:449-458
The main purpose of sinter pot studies is to quantify the common indicators of performance viz., mix moisture, productivity, coke rate and sinter quality. For three ore blends—containing 50 mass% pisolite ore and up to 30 mass% Marra Mamba ore—si