Zobrazeno 1 - 10
of 51
pro vyhledávání: '"Branko Matovic"'
Autor:
Nikolaos Kostoglou, Sebastian Stock, Angelos Solomi, Damian M. Holzapfel, Steven Hinder, Mark Baker, Georgios Constantinides, Vladislav Ryzhkov, Jelena Maletaskic, Branko Matovic, Jochen M. Schneider, Claus Rebholz, Christian Mitterer
Publikováno v:
Nanomaterials, Vol 14, Iss 7, p 601 (2024)
This study considers the influence of purity and surface area on the thermal and oxidation properties of hexagonal boron nitride (h-BN) nanoplatelets, which represent crucial factors in high-temperature oxidizing environments. Three h-BN nanoplatelet
Externí odkaz:
https://doaj.org/article/5fcb7532178b445d920e808d6ebf817c
Autor:
Nikolaos Kostoglou, Christos Tampaxis, Georgia Charalambopoulou, Georgios Constantinides, Vladislav Ryzhkov, Charalabos Doumanidis, Branko Matovic, Christian Mitterer, Claus Rebholz
Publikováno v:
Nanomaterials, Vol 10, Iss 12, p 2435 (2020)
Nanotubes made of boron nitride (BN) and carbon have attracted considerable attention within the literature due to their unique mechanical, electrical and thermal properties. In this work, BN and carbon nanotubes, exhibiting high purity (>99%) and si
Externí odkaz:
https://doaj.org/article/3de4bcee067a45a5a00b7d9605ae1a21
Autor:
ADELA EGELJA, JELENA GULICOVSKI, ALEKSANDAR DEVECERSKI, BILJANA BABIC, MIROSLAV MILJKOVIC, SNEZANA BOSKOVIC, BRANKO MATOVIC
Publikováno v:
Journal of the Serbian Chemical Society, Vol 73, Iss 7, Pp 745-751 (2008)
Coniferous wood (fir) was transformed by pyrolysis into carbon preforms, which were subsequently converted into biomorphic ceramics by the pressure infiltration technique with colloidal silica. An in situ reaction between the silica and the carbon te
Externí odkaz:
https://doaj.org/article/62e01f24112a469093365ee5ba6a0282
Publikováno v:
Journal of the Serbian Chemical Society, Vol 71, Iss 6, Pp 677-683 (2006)
The possibility of using diatomaceous earth as Si precursor for low temperature synthesis of non-oxide powders by carbothermal reduction-nitridation was studied. It was found that carbonitriding reactions produce phases of the Si–Al–O–N system.
Externí odkaz:
https://doaj.org/article/28ec961c1ba24490a417ab9f1508e79a
Autor:
SNEZANA BOSKOVIC, BRANKO MATOVIC
Publikováno v:
Journal of the Serbian Chemical Society, Vol 69, Iss 8-9, Pp 705-710 (2004)
The effects of temperature on the thermal conductivity of Si3N4 sintered with Li-exchanged zeolite were investigated. The highest conductivity was measured for the ceramics sintered with 10 % of additive. The complete a->b-Si3N4 transformation and ma
Externí odkaz:
https://doaj.org/article/ec86133abe3a49efa1b2fa0ca01032bf
Publikováno v:
Journal of the Serbian Chemical Society, Vol 68, Iss 6, Pp 505-510 (2003)
Local and conventional raw materialsmassive basalt from the Vrelo locality on Kopaonik mountainhave been used as starting materials to test their suitability for the production of glass-ceramics. Crystallization phenomena of glasses of the fused basa
Externí odkaz:
https://doaj.org/article/4136d213f6ba4100a4d2eb484d509b67
Autor:
Filip, Veljković M., Stevan, Dimitrijević P., Silvana, Dimitrijević B., Borislava, Vurdelja D., Branko, Matović Z., Milovan, Stoiljković M., Željko, Kamberović J., Suzana, Veličković R.
Publikováno v:
In Arabian Journal of Chemistry February 2023 16(2)
Publikováno v:
Science of Sintering. 54:59-71
The paper deals with the characteristics of synthesized glass-ceramics obtained by sintering a mixture of final flotation waste (FFW) with tuff at 1260?C for 7 h, followed by the annealing of pressed samples at 1080oC for 36 h. The experiments were d
Nanoemulsification synthesis route for obtaining highly efficient Ag3PO4 photocatalytic nanomaterial
Autor:
Marija Prekajski-Djordjevic, Aleksandra Zarubica, Ana Kalijadis, Biljana Babic, Svetlana Butulija, Jelena Maletaskic, Branko Matovic
Publikováno v:
Journal of the Serbian Chemical Society
Nanoemulsion technique based on Ouzo effect was applied for the fast and simple synthesis of Ag3PO4 at room temperature. X-ray powder diffraction analysis and Raman spectroscopy reviled that synthesized powder was single-phase. Using scanning electro
Autor:
Vladimir Pavkov, Gordana Bakic, Vesna Maksimovic, Ivana Cvijovic-Alagic, Dusan Bucevac, Branko Matovic
Publikováno v:
Science of Sintering. :2-2
This paper presents the technological process for obtaining basalt-stainless steel composite materials and testing their physical and mechanical properties. The phases of the technological process consist of: milling, homogenization, pressing, and si