Zobrazeno 1 - 10
of 7 016
pro vyhledávání: '"Bonding strength"'
Publikováno v:
Materials Research Letters, Pp 1-9 (2024)
A novel FeCoNiCrCu high-entropy alloy (HEA) coating and ultrasonic vibration composite treatment method were developed to prepare the Al/Mg bimetal to enhance the Al/Mg interface. Elemental interdiffusion at the Al/HEA interface led to the formation
Externí odkaz:
https://doaj.org/article/20d22aff1c624d369fc3e7b255433cee
Publikováno v:
Cailiao gongcheng, Vol 52, Iss 7, Pp 182-193 (2024)
Besides cast-rolling speed and casting temperature， the melt pressure in the cast-rolling zone is also an important factor affecting the process stability and interfacial bonding strength of horizontal two-roll cast Ti/Al composite plate. In this s
Externí odkaz:
https://doaj.org/article/b9c810d051834c5daa93f46cad575a3a
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-14 (2024)
Abstract This article is aimed at discussing the combined effect of mineral admixture and servicing temperature, especially in cold environment, on the properties of magnesium phosphate repair mortar (MPM). The influence mechanism of fly ash content
Externí odkaz:
https://doaj.org/article/a639a79b359d453694f585f6672f17a4
Publikováno v:
Journal of Materials Research and Technology, Vol 31, Iss , Pp 860-869 (2024)
Laser direct energy deposition (LDED) exhibits great potential for application in rail repairing due to its low cost and high process automation. However, the martensite transformation accompanied by rapid solidification leads to the decrease in the
Externí odkaz:
https://doaj.org/article/4993bad0fc7e4c0e89533d0d1cbb65e9
Autor:
Ye Yang, Jinfeng Xu, Xusheng Chen, Wang Yang, Lina Si, Hongjuan Yan, Zhaoliang Dou, Fengbin Liu, Huanxiong Xia
Publikováno v:
Journal of Advanced Joining Processes, Vol 10, Iss , Pp 100243- (2024)
Two-component room temperature vulcanizing silicone adhesive RTV566 with a lower elastic modulus has been widely used in precision optomechanical products such as remote sensors and aerospace infrared cameras. However, the silicone adhesive is of poo
Externí odkaz:
https://doaj.org/article/6bfbe984d10544dba8317685d7653486
Publikováno v:
Frontiers in Built Environment, Vol 10 (2024)
This article aims to investigate the mechanical properties and substrate adhesion of the pull-off method in polymer mortars modified with styrene-butadiene resin polymer (SBR) containing glass powder and composite fiber-reinforced slag. Different mix
Externí odkaz:
https://doaj.org/article/f988f369260b430ca21fea6062a39666
Autor:
Zewen Shi, Fang Yang, Tianyu Du, Qian Pang, Chen Liu, Yiwei Hu, Weilai Zhu, Xianjun Chen, Zeming Chen, Baiyang Song, Xueqiang Yu, Zhewei Ye, Lin Shi, Yabin Zhu, Qingjiang Pang
Publikováno v:
Materials Today Bio, Vol 28, Iss , Pp 101234- (2024)
Magnesium (Mg)-based scaffolds are garnering increasing attention as bone repair materials owing to their biodegradability and mechanical resemblance to natural bone. Their effectiveness can be augmented by incorporating surface coatings to meet clin
Externí odkaz:
https://doaj.org/article/eedbc2ee174147f5acf445f9f2f85abe
Publikováno v:
Polymer Testing, Vol 139, Iss , Pp 108579- (2024)
Injection molding is widely used in the plastics manufacturing industry. However, there is a need to better understand and calculate the bonding strength between the injection-molded part and the insert, especially for semi-crystalline polymers. The
Externí odkaz:
https://doaj.org/article/84b2049a3d3442e09d6d72ae70407a98
Publikováno v:
Polymer Testing, Vol 138, Iss , Pp 108557- (2024)
The melamine-formaldehyde (MF) resin adhesive was modified by graphene oxide (GO), the chemical structure, wettability, bonding performance, tensile properties, curing performance and thermal properties of the modified resin were analyzed, and the to
Externí odkaz:
https://doaj.org/article/cdd3f864b20047f7b4e2a27f7a03d812
Publikováno v:
Heritage Science, Vol 12, Iss 1, Pp 1-16 (2024)
Abstract Damage and fracture of archaeological potteries not only jeopardize the long-term preservation but also hinder their exhibition. To repair these pottery sherds effectively, this study introduces a novel inorganic phosphate-based adhesive and
Externí odkaz:
https://doaj.org/article/08925fcc3e0b44f8b8540fdd4991ccf9