Zobrazeno 1 - 10
of 77
pro vyhledávání: '"Bogdan Marin"'
Autor:
Daniel Mitru, Irina Lucaciu, Mihai Nita-Lazar, Cristina Ileana Covaliu, Gheorghe Nechifor, Ioana Corina Moga, Bogdan Marin, Iuliana Paun
Publikováno v:
Romanian Journal of Ecology & Environmental Chemistry, Vol 2, Iss 2, Pp 210-220 (2020)
The environment pollution is an important issue influencing on human health and environmental equilibrium. The range of pollutants is very wide due to the industrialization and population growth and the surfactants are one of the most common organic
Externí odkaz:
https://doaj.org/article/49be1d03d6254da887e0ef12d7e7ebb6
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 46:37-40
Topological optimization is a type of structural optimization that provides conceptual design for lighter structures. The aim of this method is to maximize system performance for a given set of loads, boundary conditions, and constraints. This method
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1b437526891fd9f93403bc3ceb254cb8
https://doi.org/10.35219/mms.2023.1.06
https://doi.org/10.35219/mms.2023.1.06
Autor:
Mihai Gabriel MATACHE, Florin Bogdan MARIN, Carmela GURAU, Gheorghe GURAU, Mihaela MARIN, Iuliana GĂGEANU, Alexandru IONESCU
Publikováno v:
INMATEH Agricultural Engineering. :471-480
For negative effects minimization generated by agriculture on the environment, there were established a series of measures regarding the reduction of the amount of fertilizers and phytosanitary substances used. Thus, one of the innovative technologie
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::156817b311ec531ab01faa9d7e0ade1b
https://doi.org/10.35633/inmateh-68-46
https://doi.org/10.35633/inmateh-68-46
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 45:92-95
This research is concerned to propose a computer vision algorithm to track manual assembly task. Manual assembly in case of electronics parts are used largely in automotive industry. The phases tracking of assembly could also be used for learning pur
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::012920889215642c5f51c4666ea7a31f
https://doi.org/10.35219/mms.2022.4.15
https://doi.org/10.35219/mms.2022.4.15
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 45:126-129
Material identification has been proved to be of important interest for different fields such as industrial automation, autonomous robots The autonomous robots for garbage collection, such as aquatic-cleaning [3] or garbage gathering [6] need the alg
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::81456ec288eb31bc941d6281daa907d1
https://doi.org/10.35219/mms.2022.4.20
https://doi.org/10.35219/mms.2022.4.20
Autor:
Florin-Bogdan MARIN, Mihaela MARIN
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 45:100-103
The subject of this research was to study the effect of sintering time on the dimensional characteristics of some powder metallurgy (PM) materials. The powders used in this study are prealloyed iron-based powders with Cu, Ni and Mo. The powders were
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2590846514247554f8c9798c96a03ae4
https://doi.org/10.35219/mms.2022.4.17
https://doi.org/10.35219/mms.2022.4.17
Autor:
Mihaela MARIN, Florin-Bogdan MARIN
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 45:96-99
The subject of this research is the use of CFD techniques to identify the impact of using shutters in case of tiny house. Low temperatures and the aim to use as less energy amount as possible need solution. The composites shells allow designing effic
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ccf51fc8d3fdf4ec0ebfa1d0b1ece92e
https://doi.org/10.35219/mms.2022.4.16
https://doi.org/10.35219/mms.2022.4.16
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science. 45:20-23
In this paper we present an algorithm based on deep learning. The program allows the user to select in a graphical interface the type of plant for which it is desired to insert images for disease identification. To train and test models, we used our
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::66e37f68336d71021b9a3526cca160da
https://doi.org/10.35219/mms.2022.3.04
https://doi.org/10.35219/mms.2022.3.04
Autor:
Mihaela MARIN, Florin-Bogdan MARIN
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 44, Iss 4, Pp 40-43 (2021)
The aim of this research was to study the porosity in carburizing in fluidized-bed on sintered alloys produced by powder metallurgy route using an image analysis software and to compare the obtained results with the conventional method for porosity m
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9d3ccb9745b33aa14a671096ca672150
https://doi.org/10.35219/mms.2021.4.07
https://doi.org/10.35219/mms.2021.4.07
Autor:
Mihaela MARIN, Florin-Bogdan MARIN
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 44, Iss 4, Pp 86-90 (2021)
The subject of this research is the use of artificial vision techniques to optimize the placement of hot air sources depending on the location of certain equipment in industrial halls operating at low temperatures. Low temperature industrial halls re
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::69d78d62ba29b91124b25db4580d0462
https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/4983
https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/4983