Zobrazeno 1 - 10
of 38
pro vyhledávání: '"Bo Cheng Jin"'
Publikováno v:
Journal of Materials Research and Technology, Vol 22, Iss , Pp 625-641 (2023)
The particle/matrix interface of metal matrix composites (MMCs) can give rise to extra strength and then affect the local deformation behavior. This strengthening effect originates from the plastic strain gradients due to the incompatibility of plast
Externí odkaz:
https://doaj.org/article/222dd852400045fbaa9f3252f2fbbf4b
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 4, Pp 7669-7685 (2020)
The hot deformation behavior of Mg-6Gd-5Y-0.3Zr alloy at the temperatures of 673–748 K and the strain rates of 0.01–1.0 s−1 were investigated by hot compression experiments. On this basis, a physically based internal state variable (ISV) model
Externí odkaz:
https://doaj.org/article/845ef9fe623941398ec507e0371e5978
Publikováno v:
Advanced Manufacturing: Polymer & Composites Science, Vol 5, Iss 3, Pp 114-127 (2019)
Disposal of wind turbine blades, which are generally non-biodegradable and non-recyclable products comprised largely of fiber-reinforced thermoset polymers (FRPs), pose environmental problems when components reach end-of-service-life. Because the glo
Externí odkaz:
https://doaj.org/article/2cd991d041fe46b9b863dd32ace36bc8
Publikováno v:
Materials & Design, Vol 199, Iss , Pp 109384- (2021)
Through studying the effect of initial microstructure on the precipitation behavior, microstructure evolution and mechanical properties of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy, an effective way to fabricate high-strength and ductile Mg-RE alloy was proposed b
Externí odkaz:
https://doaj.org/article/488498c156ae4fa2858d2468318d6c16
Publikováno v:
Journal of Composites Science, Vol 5, Iss 1, p 13 (2021)
This study reports a method to analyze parametric effects on the spread flow kinetics of fluid droplets on unidirectional fiber beds. The investigation was undertaken in order to guide the design of droplet arrays for production of an out-of-autoclav
Externí odkaz:
https://doaj.org/article/609c13e7976e4099a149c5dbaa8700c1
Publikováno v:
Acta Geotechnica.
Injection of fluids during wastewater disposal and geologic carbon sequestration causes induced stress and changes in rock’s elastic and failure properties, such as elastic moduli and fracture toughness. An accurate understanding of such changes in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4e2dff39b9f81bdaf0ed9652c14f4105
https://doi.org/10.1007/s11440-023-01843-2
https://doi.org/10.1007/s11440-023-01843-2
Publikováno v:
High Performance Polymers. 34:33-43
Polyimide composites (PETI-340M) were fabricated and subjected to high-temperature aging and thermal cycling to evaluate resistance to degradation. Mechanical-degradation mechanisms and kinetics depended on aging temperature. Aging at 232°C resulted
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::003adeb25504667aa1e6aee5bf651d9e
https://doi.org/10.1177/09540083211033771
https://doi.org/10.1177/09540083211033771
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 4, Pp 7669-7685 (2020)
The hot deformation behavior of Mg-6Gd-5Y-0.3Zr alloy at the temperatures of 673–748 K and the strain rates of 0.01–1.0 s−1 were investigated by hot compression experiments. On this basis, a physically based internal state variable (ISV) model
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::66652ed21200ee9045e6e8865fa439c0
http://www.sciencedirect.com/science/article/pii/S2238785420312643
http://www.sciencedirect.com/science/article/pii/S2238785420312643
Publikováno v:
International Journal of Mechanical Sciences. 159:1-19
Multi-pass spinning forming is one of the major approaches to manufacture rotationally symmetric thin-walled components, which is strongly influenced by the spinnability of materials. But it remains an open question regarding the formability limit in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a381c60fa2347cee85598a43092ce7c8
https://doi.org/10.1016/j.ijmecsci.2019.05.030
https://doi.org/10.1016/j.ijmecsci.2019.05.030
Publikováno v:
Advanced Manufacturing: Polymer & Composites Science, Vol 5, Iss 3, Pp 114-127 (2019)
Disposal of wind turbine blades, which are generally non-biodegradable and non-recyclable products comprised largely of fiber-reinforced thermoset polymers (FRPs), pose environmental problems when components reach end-of-service-life. Because the glo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0d7a9f2e34f443ef14d081d34c16a785
https://doi.org/10.1080/20550340.2019.1639967
https://doi.org/10.1080/20550340.2019.1639967