Zobrazeno 1 - 10
of 168
pro vyhledávání: '"Benjamin Klusemann"'
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 6, Pp 2298-2311 (2024)
Constrained Friction Processing (CFP) is a novel solid-state processing technique suitable for lightweight materials, such Mg- and Al-alloys. The technique enables grain size refinement to fine or even ultrafine scale. In this study, the effect of CF
Externí odkaz:
https://doaj.org/article/d798955029004dc4a332f5d4e25c9ff2
Autor:
Moritz Braun, Ting Chen, Junjun Shen, Henrik Fassmer, Benjamin Klusemann, Shahram Sheikhi, Sören Ehlers, Eckehard Müller, Ardeshir Sarmast, Jan Schubnell
Publikováno v:
Materials & Design, Vol 244, Iss , Pp 113122- (2024)
Additively manufactured (AM) components—either made by laser-powder bed fusion or wire and arc additive manufacturing—typically contain process-related defects on and near surfaces that can be removed by machining. Various studies have shown that
Externí odkaz:
https://doaj.org/article/9f8d1dfe205b41e79d3a81cbb608701d
Autor:
Eduardo Antunes Duda, Zina Kallien, Sabrina da Silva Soares, Tárique Hernandez Schneider, Henrique Ribeiro Piaggio Cardoso, Guilherme Vieira Braga Lemos, Tiago Falcade, Afonso Reguly, Benjamin Klusemann
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-10 (2024)
Abstract Friction surfacing (FS) is a solid-state coating technology for metallic materials, where the deposition of a consumable material on a substrate is enabled via friction and plastic deformation. The deposited layer material commonly presents
Externí odkaz:
https://doaj.org/article/9fbc5ee25a85481cb0e471a2e815f20d
Autor:
Andres Pasetti-Roza, José Victoria-Hernandez, Pedro Henrique Costa Pereira da Cunha, Cleber Rodrigo de Lima Lessa, Luciano Andrei Bergmann, Gerrit Kurz, Dietmar Letzig, Benjamin Klusemann
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 4895-4901 (2024)
In this work, Friction Stir Welding (FSW) of magnesium alloy ME21 in a T-profile is performed with a relatively higher welding speed than usual in this material. The FSW process parameters, i.e., rotational speed and welding speed, are investigated f
Externí odkaz:
https://doaj.org/article/5fab2d988c4d4f7986657ac3b8ee86f4
Autor:
Ting Chen, Banglong Fu, Junjun Shen, Uceu F.H.R. Suhuddin, Björn Wiese, Yuanding Huang, Min Wang, Jorge F. dos Santos, Jean Pierre Bergmann, Benjamin Klusemann
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 2, Pp 516-529 (2024)
In order to obtain Mg alloys with fine microstructures and high mechanical performances, a novel friction-based processing method, name as “constrained friction processing (CFP)”, was investigated. Via CFP, defect-free Mg-Zn-Ca rods with greatly
Externí odkaz:
https://doaj.org/article/d466afa953cb4cc181cec32474bd9102
Publikováno v:
Additive Manufacturing Letters, Vol 8, Iss , Pp 100184- (2024)
Solid-state additive manufacturing (AM) via friction stir based processes is gaining increased attention as these techniques are feasible for several similar and dissimilar material combinations and induce significantly lower energy input to the subj
Externí odkaz:
https://doaj.org/article/384f5397847546388a45de9e06f2757d
Publikováno v:
Journal of Materials Research and Technology, Vol 24, Iss , Pp 4639-4649 (2023)
This work investigates the influence of Friction Riveting processing conditions on FR4-PCB substrate/AA2024 rivet joints in terms of process temperature evolution, joint formation, and joint physical-chemical and mechanical properties. The joints wer
Externí odkaz:
https://doaj.org/article/26bad0cfcf094b6b8dbff9d963d1efdc
Autor:
Theano N. Examilioti, Wenya Li, Nikolai Kashaev, Volker Ventzke, Benjamin Klusemann, Murat Tiryakioğlu, Nikolaos D. Alexopoulos
Publikováno v:
Journal of Materials Research and Technology, Vol 24, Iss , Pp 895-908 (2023)
The anisotropic mechanical behavior of Al–Cu–Li (AA2198) alloy under different artificial ageing conditions as well as for different thicknesses of the material was examined in the present investigation. Material characterization was performed fo
Externí odkaz:
https://doaj.org/article/cc508d87ab944d19a1730fd4b8ec06e9
Autor:
Arne Roos, Franziska Metternich, Zina Kallien, Jonas Baumann, Jonas Ehrich, Monika Kipp, Stefanie Hanke, Dirk Biermann, Benjamin Klusemann
Publikováno v:
Materials & Design, Vol 235, Iss , Pp 112390- (2023)
In the present study, AA6082 aluminium is deposited onto AISI 4140 steel substrates via friction surfacing (FS). Aiming to understand the influence of substrate surface for the bonding mechanism during the plasticising as well as the deposition phase
Externí odkaz:
https://doaj.org/article/9717266ea9004bc9963a0bca19996d1a
Autor:
Camila C. de Castro, Junjun Shen, Athos H. Plaine, Uceu F.H. Suhuddin, Nelson Guedes de Alcântara, Jorge F. dos Santos, Benjamin Klusemann
Publikováno v:
Journal of Materials Research and Technology, Vol 20, Iss , Pp 857-866 (2022)
Refill Friction Stir Spot Welding (refill FSSW) is a method for joining similar and dissimilar lightweight metallic materials or thermoplastic polymers. The technique produces welds that feature suitable mechanical properties with advantages such as
Externí odkaz:
https://doaj.org/article/5c09a67e1db2483d8b8f47817bb9449b