Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Benito del Río"'
Autor:
Milagrosa González Fernández de Castro, Yolanda Martín Álvarez, Juan José Moreno-Labella, Miguel Panizo-Laiz, Benito del Río
Publikováno v:
Metals, Vol 10, Iss 6, p 728 (2020)
The Ni-hard alloys white-cast irons are generally used for high wear work. Among them, those with better impact resistance because of its low carbon content compared to the rest of the family, are studied in this paper. One experimental technique of
Externí odkaz:
https://doaj.org/article/f60a215fc5ff4c55864e8fab5b983ac0
Autor:
Javier Echávarri Otero, Eduardo de la Guerra Ochoa, Enrique Chacón Tanarro, Benito del Río López
Publikováno v:
Advances in Mechanical Engineering, Vol 9 (2017)
This article presents an analytical model for predicting friction in mixed lubrication regime. The calculations consider load shared between roughness asperities and the lubricant film, as well as the appearance of thermal effects in the contact and
Externí odkaz:
https://doaj.org/article/94ca8d4051744666a340a432edc5a738
Autor:
Ana I. García-Diez, Carolina Camba-Fabal, Ángel Varela-Lafuente, Víctor Blázquez-Martínez, José Luís Mier-Buenhombre, Benito Del Río-López
Publikováno v:
Dyna, Vol 81, Iss 188, Pp 216-221 (2014)
En este trabajo se ha evaluado la influencia del contenido de s ilicio en la resistencia frente al desgaste y en las propiedade s mecánicas de diferentes fundiciones con alto c ontenido en silicio del tipo S ilal. Para ello se ha variado el contenid
Externí odkaz:
https://doaj.org/article/a44caf27aef346c6864c801be953049c
Autor:
Benito Del Río López, Ana García Diez, José Luís Mier Buenhombre, Carolina Camba Fabal, Almudena Filgueira Vizoso
Publikováno v:
Metals, Vol 8, Iss 10, p 745 (2018)
This paper presents an alternative to the materials traditionally used in the manufacture of coal mills for coating wedges. For this purpose, we designed and tested ten new austenitic steels with medium manganese content. The thermal structural stabi
Externí odkaz:
https://doaj.org/article/4f53213eb5084e7da3dd6b8729b8ca5c
Autor:
Juan Asensio-Lozano, Jose Florentino Álvarez-Antolín, Alejandro González-Pociño, Benito Del Río-López
Publikováno v:
Metals, Vol 8, Iss 5, p 293 (2018)
The present research was focused on the identification of manufacturing factors that have an active influence on the graphite phase formation in Nihard cast irons inoculated with FeB, constituting the outer layer of duplex work rolls. These rolls are
Externí odkaz:
https://doaj.org/article/6b11f32c6549419aa2a6d1b258f477fe
Autor:
Ana Barros-Timmons, Vicente Lorenzo, Fernando Ania, M. Rosário Ribeiro, João M. Campos, Benito del Río
Publikováno v:
Digital.CSIC. Repositorio Institucional del CSIC
instname
instname
6 pags., 6 figs., 3 tabs.
The full potential of poly(L-lactide) (PLLA) reinforced with graphene oxide, GO, nanocomposites tends to be hindered by aggregation of the nanofillers. In order to promote a good dispersion of GO in the PLLA matrix, pol
The full potential of poly(L-lactide) (PLLA) reinforced with graphene oxide, GO, nanocomposites tends to be hindered by aggregation of the nanofillers. In order to promote a good dispersion of GO in the PLLA matrix, pol
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f2f78a6c6543ad5e6ce24a9699896b1e
http://hdl.handle.net/10261/226927
http://hdl.handle.net/10261/226927
Publikováno v:
Composites Part B: Engineering, ISSN 1359-8368, 2018-12-01, Vol. 154
Archivo Digital UPM
instname
Archivo Digital UPM
instname
In order to correctly predict the macroscale elastic behavior of nanocomposite macroscale structures, an accurate nanoscale model must be available for subsequent homogenization. In this work, we demonstrate that the accuracy of that nanoscale model
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::7184754e3b298739fb0254636559b156
http://oa.upm.es/52377/
http://oa.upm.es/52377/
Autor:
José Luis Mier Buenhombre, Ana Isabel García Diez, Almudena Filgueira Vizoso, Carolina Camba Fabal, Benito Del Río López
Publikováno v:
Metals, Vol 8, Iss 10, p 745 (2018)
Metals
Volume 8
Issue 10
Metals
Volume 8
Issue 10
This paper presents an alternative to the materials traditionally used in the manufacture of coal mills for coating wedges. For this purpose, we designed and tested ten new austenitic steels with medium manganese content. The thermal structural stabi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::aefbff7082a6646f9be09897d57a2064
http://www.mdpi.com/2075-4701/8/10/745
http://www.mdpi.com/2075-4701/8/10/745
Autor:
Eduardo de la Guerra Ochoa, Enrique Chacón Tanarro, Benito del Río López, Javier Echávarri Otero
Publikováno v:
Journal of Mechanical Engineering Science, ISSN 0954-4062, 2018-06, Vol. 232, No. 11
Archivo Digital UPM
Universidad Politécnica de Madrid
Archivo Digital UPM
Universidad Politécnica de Madrid
This article presents a thermal resistances-based approach for solving the thermal-elastohydrodynamic lubrication problem in point contact, taking the lubricant rheology into account. The friction coefficient in the contact is estimated, along with t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a0b2db0645e42ce180db6ea6a0e1323f
http://oa.upm.es/50263/
http://oa.upm.es/50263/
Autor:
Eduardo de la Guerra Ochoa, Enrique Chacón Tanarro, Benito del Río López, Alejandro Lopez, Javier Echávarri Otero
Publikováno v:
Tribology Letters, ISSN 1023-8883, 2018, Vol. 66, No. 31
Archivo Digital UPM
Universidad Politécnica de Madrid
Archivo Digital UPM
Universidad Politécnica de Madrid
This article presents thermal EHL calculations for line contacts using a new analytical form of the Reynolds equation for lubricants whose rheological behaviour follows a modified Carreau model proposed by Bair. The isothermal calculation process was
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3731508ff0c382b532a95d4706d431d4
https://oa.upm.es/54693/
https://oa.upm.es/54693/