Zobrazeno 1 - 10
of 77
pro vyhledávání: '"Bengt-Göran Rosén"'
Publikováno v:
Advances in Tribology, Vol 2017 (2017)
An important parameter in the reduction of fuel consumption of heavy-duty diesel engines is the Power Cylinder Unit (PCU); the PCU is the single largest contributor to engine frictional losses. Much attention, from both academia and industry, has bee
Externí odkaz:
https://doaj.org/article/eea3a8bbba4944e8bb28d57e7ea3ed8b
Digital manufacturing can produce new and advanced tools more rapidly and at lower cost than traditional manufacturing. This new technology means manufacturers need to develop innovative business models adapted to this change in the manufacturing lan
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=intech______::305b457c8da82fc058f361e577869900
https://mts.intechopen.com/articles/show/title/from-traditional-manufacturing-to-digital-manufacturing-two-swedish-case-studies
https://mts.intechopen.com/articles/show/title/from-traditional-manufacturing-to-digital-manufacturing-two-swedish-case-studies
Autor:
Sabina Rebeggiani, Bengt-Göran Rosén
Publikováno v:
Surface Topography: Metrology and Properties.
The automotive industry continuously strives to reduce their environmental impact. For the paint shop it means to introduce more sustainable paint concepts, while maintaining the production rate and retain the right surface appearance that is crucial
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d5d7202afaf1bbed6683b8e919664f00
https://doi.org/10.1088/2051-672x/acd869
https://doi.org/10.1088/2051-672x/acd869
Autor:
Seyed Hosseini, S. Hatami, Christos Oikonomou, Bengt-Göran Rosén, Olena Flys, M. Johansson, Johan Berglund
Publikováno v:
Journal of the Japan Society for Precision Engineering. 86:71-79
The flexibility in respect of design and manufacturing freedom that additive manufacturing (AM) offer are key driving factors for many industrial scctors. For example, designing and manufacturing unique internal conformal cooling/heating channels wit
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f39368c9c1ca3e30c2281614f2d047b7
https://doi.org/10.2493/jjspe.86.71
https://doi.org/10.2493/jjspe.86.71
Publikováno v:
Surface Topography: Metrology and Properties. 11:014003
Automotive interior components are produced by injection moulding due to its cost effectiveness in mass production. The surfaces of these components are textured to control the appearance and other surface functional properties such as wear and scrat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::03eaec64e7c36ccd4edfeff670261542
https://doi.org/10.1088/2051-672x/acb4b0
https://doi.org/10.1088/2051-672x/acb4b0
Publikováno v:
Tribology International. 133:224-229
A low friction piston ring pack, with tangential load halved, was tested in engines with four different cylinder liner finishes. Oil consumption, oil temperature and liner surface temperature were ...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fb1484ffe2f6e9eb6a165c6ca94b4d6f
https://doi.org/10.1016/j.triboint.2018.11.022
https://doi.org/10.1016/j.triboint.2018.11.022
Autor:
Vijeth Venkataram Reddy, Chihab Eddine Berrimi, Olena Flys, Anish Chaparala, Bengt-Göran Rosén, Amogh
Publikováno v:
Procedia Manufacturing. 25:389-396
Fused Deposition Modeling (FDM) is mostly used to develop functional prototypes and in some applications for end-use parts. It is important to study the surfaces produced by FDM to understand the c ...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6b3767f22af98456a6222d66280812f3
https://doi.org/10.1016/j.promfg.2018.06.108
https://doi.org/10.1016/j.promfg.2018.06.108
Publikováno v:
Surface Topography: Metrology and Properties. 8:044001
A material and surface selection within the car industry is usually based on a comprehensive study based on sensation and perception, focusing on particular perceived qualities and impressions (emotional functions) through visual and tactile interact
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b468a86017d9450c93258fd1a5f0d802
https://doi.org/10.1088/2051-672x/ab915f
https://doi.org/10.1088/2051-672x/ab915f
Autor:
Amogh Vedantha Krishna, Bengt-Göran Rosén, Vijeth Venkataram Reddy, Johan Berglund, Olena Flys
Publikováno v:
Surface Topography: Metrology and Properties. 8:024012
The increasing interest in Additive Manufacturing (AM) is due to its huge advantage in producing parts without any geometrical limitations. It is due to this reason, AM is extensively utilized in automotive, aerospace, medical and dental applications
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::706dd6bfff447cac564f9693690a3cd4
https://doi.org/10.1088/2051-672x/ab9b73
https://doi.org/10.1088/2051-672x/ab9b73
Publikováno v:
Surface Topography: Metrology and Properties. 8:024003
The highly complex nature of as printed metal AM surfaces pose other challenges for making measurements compared to surfaces made with many conventional processing methods. The high complexity is c ...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::24e4a87f1e3ae7b4b44d8c0a09d3e5c9
https://doi.org/10.1088/2051-672x/ab84c3
https://doi.org/10.1088/2051-672x/ab84c3