Zobrazeno 1 - 10
of 102
pro vyhledávání: '"Behzad Bahrami"'
Autor:
Behzad Bahrami‐Hessari, Leif Jansson
Publikováno v:
Clinical and Experimental Dental Research, Vol 8, Iss 1, Pp 20-27 (2022)
Abstract Objectives The aim was to analyze clinical parameters of peri‐implantitis in human subjects exposed and non‐exposed to use of systemic statins. Material and methods This retrospective cohort pilot study compared patient records of 60 exp
Externí odkaz:
https://doaj.org/article/35f84ac32942406081b24c2cfed74a49
Autor:
Sally Mabrouk, Behzad Bahrami, Hytham Elbohy, Khan Mamun Reza, Ashim Gurung, Mao Liang, Fan Wu, Mingtai Wang, Shangfeng Yang, Qiquan Qiao
Publikováno v:
InfoMat, Vol 2, Iss 5, Pp 928-941 (2020)
Abstract In this work, methylammonium lead triiodide (CH3NH3PbI3) perovskite solar cells with efficiencies higher than 18% were achieved using a new nanocomposite hole transport layer (HTL) by doping poly(ethylenedioxythiophene):poly(styrene sulfonat
Externí odkaz:
https://doaj.org/article/6320897e792141fa979d67d18a0799f6
Autor:
Behzad Bahrami, Sally Mabrouk, Nirmal Adhikari, Hytham Elbohy, Ashim Gurung, Khan M. Reza, Rajesh Pathak, Ashraful H. Chowdhury, Gopalan Saianand, Wenjin Yue, Jiantao Zai, Xuefeng Qian, Mao Liang, Qiquan Qiao
Publikováno v:
InfoMat, Vol 2, Iss 2, Pp 409-423 (2020)
Abstract In this work, grain boundary (GB) potential barrier ( Δφ GB), dopant density (Pnet), and filled trap state density (PGB,trap) were manipulated at the nanoscale by exposing the fabricated perovskite films to various relative humidity (RH) e
Externí odkaz:
https://doaj.org/article/da4afbc295674b98807f342b545cbce9
Autor:
Rajesh Pathak, Ke Chen, Ashim Gurung, Khan Mamun Reza, Behzad Bahrami, Jyotshna Pokharel, Abiral Baniya, Wei He, Fan Wu, Yue Zhou, Kang Xu, Qiquan (Quinn) Qiao
Publikováno v:
Nature Communications, Vol 11, Iss 1, Pp 1-10 (2020)
Here the authors report a simple method to create a solid electrolyte interphase that is tightly anchored onto the surface of lithium metal anode. This artificial structure suppresses dead and dendrite Li and stores Li via formation of alloys, enabli
Externí odkaz:
https://doaj.org/article/1096df96e5ca493f8a28055b35bf4240
Autor:
Seyed Ataollah Naghavi, Maryam Tamaddon, Arsalan Marghoub, Katherine Wang, Behzad Bahrami Babamiri, Kavan Hazeli, Wei Xu, Xin Lu, Changning Sun, Liqing Wang, Mehran Moazen, Ling Wang, Dichen Li, Chaozong Liu
Publikováno v:
Bioengineering, Vol 9, Iss 10, p 504 (2022)
Additive manufacturing has been used to develop a variety of scaffold designs for clinical and industrial applications. Mechanical properties (i.e., compression, tension, bending, and torsion response) of these scaffolds are significantly important f
Externí odkaz:
https://doaj.org/article/591110b638634ef3938040b52365321d
Autor:
Behzad Bahrami, Sally Mabrouk, Ashim Gurung, Khan Mamun Reza, Hytham Elbohy, Rajesh Pathak, Gopalan Saianand, Nirmal Adhikari, Ashish Dubey, Sheikh Ifatur Rahman, Quinn Qiao
Publikováno v:
Advanced Energy & Sustainability Research, Vol 2, Iss 3, Pp n/a-n/a (2021)
Perovskite solar cells (PSCs) have received considerable attention in recent years due to their low processing cost and high‐power conversion efficiency. However, the mechanisms of PSCs are not fully understood. A model based on a probabilistic and
Externí odkaz:
https://doaj.org/article/1623a216d3934c76af4cffbfa2c60c99
Publikováno v:
Materials & Design, Vol 188, Iss , Pp - (2020)
This study develops an anisotropic generalization of the volumetric hardening model (VHM) to investigate the governing deformation mechanisms at the onset of yielding of additively manufactured lattice structure (AMLS) made of a nickel-based superall
Externí odkaz:
https://doaj.org/article/94145d308d37434bae457891d1de4766
Publikováno v:
Materials & Design, Vol 176, Iss , Pp - (2019)
This study demonstrates a relationship between manufacturing variables including design topology and post-processing heat treatment on the porosity distribution, quasi-static, and dynamic behavior of additively manufactured lattice structures (AMLS).
Externí odkaz:
https://doaj.org/article/3a278ea6df4244749a632595c474a4dc
Publikováno v:
In Additive Manufacturing August 2022 56
Autor:
Zhang, Jingqi, Liu, Yingang, Babamiri, Behzad Bahrami, Zhou, Ying, Dargusch, Matthew, Hazeli, Kavan, Zhang, Ming-Xing
Publikováno v:
In Additive Manufacturing July 2022 55