Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Beate Fankhänel"'
Autor:
Claudia Voigt, Alina Schramm, Beate Fankhänel, Ekaterina Schmid, Piotr Malczyk, Jana Hubálková, Michael Stelter, Alexandros Charitos, Christos G. Aneziris
Publikováno v:
Metallurgical and Materials Transactions B. 53:2349-2363
Hydrogen in aluminum causes the formation of detrimental hydrogen porosity in castings. In order to reduce the formation of hydrogen pores, an approach was targeted using lithium as target for hydrogen. This approach utilizes the affinity of lithium
Autor:
Christos G. Aneziris, Gotthard Wolf, Enrico Storti, Mark Badowski, Björn G. Dietrich, Beate Fankhänel, Margarita Gorshunova, Michael Stelter, Claudia Voigt
Publikováno v:
Metallurgical and Materials Transactions B. 51:2371-2380
In industrial applications, filter materials are often chosen according to cost as well as their processing and thermomechanical properties, but rarely in terms of their behavior during filtration, which is largely due to there being insufficient inf
Publikováno v:
Journal of the European Ceramic Society. 39:735-742
The contact angles of two different systems, molten silicon and a eutectic Si-8 at. pct Zr alloy and their evolution over timeon vitreous carbon and polycrystalline silicon carbide (SiC) substrates were investigated at 1500°C under vacuum, as well a
Autor:
Christos G. Aneziris, Jana Hubálková, Tilo Zienert, Beate Fankhänel, Michael Stelter, Alexandros Charitos, Claudia Voigt
Publikováno v:
Materials
Materials, Vol 13, Iss 3962, p 3962 (2020)
Volume 13
Issue 18
Materials, Vol 13, Iss 3962, p 3962 (2020)
Volume 13
Issue 18
The wetting behavior was measured for Al2O3-C in contact with AlSi7Mg with a conventional sessile drop test (vacuum, 950 °
C and 180 min) and a sessile drop test with a capillary purification unit (vacuum, 730 °
C and 30 min). The con
C and 180 min) and a sessile drop test with a capillary purification unit (vacuum, 730 °
C and 30 min). The con
Publikováno v:
Advanced Engineering Materials. 24:2100579
Autor:
Christos G. Aneziris, Alexandros Charitos, Claudia Voigt, Hanka Becker, Michael Stelter, Beate Fankhänel, Andreas Leineweber
Publikováno v:
Advanced Engineering Materials. 24:2100595
Publikováno v:
Metallurgical and Materials Transactions B. 46:1535-1541
The development of new filters for the aluminum industry requires investigations on the wettability of aluminum and its alloys on novel filter materials. The requested filter effects require not only an adequate wetting but also information about the
Autor:
Jana Hubálková, Christos G. Aneziris, Beate Fankhänel, Michael Stelter, Eva Jäckel, Claudia Voigt
Publikováno v:
Metallurgical and Materials Transactions B. 46:1066-1072
The influence of the filter surface chemistry of alumina skeletons on the filtration effect was tested with five different oxide coating materials (Al2O3, spinel, mullite, TiO2, and SiO2). All prepared filters were casted successfully under industria
Publikováno v:
Microporous and Mesoporous Materials. 118:416-422
Syntheses of NaX-coatings on highly porous stainless steel fibre substrates were carried out via direct zeolite crystallization. Both the nucleation as well as the following crystal growth took place in situ at the metal fibre bodies. The NaX-zeolite
Publikováno v:
Advanced Engineering Materials. 19:1700084