Zobrazeno 1 - 10
of 160
pro vyhledávání: '"Bau-Tong Dai"'
Publikováno v:
International Journal of Photoenergy, Vol 2012 (2012)
Nanostructured solar cells with coaxial p-n junction structures have strong potential to enhance the performances of the silicon-based solar cells. This study demonstrates a radial junction silicon nanowire (RJSNW) solar cell that was fabricated simp
Externí odkaz:
https://doaj.org/article/0f459e2188a94e0e822504a4478290d4
Publikováno v:
Advanced Science Letters. 8:730-733
Publikováno v:
Solar Energy Materials and Solar Cells. 98:277-282
We investigate the performance of amorphous Si (a-Si) solar cells fabricated with Inductively Coupled Plasma (ICP) deposition technique. The ICP system produces a-Si films with low defect density ( 3 × 10 15 cm − 3 ) , resulting in a conversion ef
Autor:
Siou-Yi Lin, Jia-Min Shieh, Cheng-Liang Hsu, Tsung-Ying Tsai, Ting-Jen Hsueh, Bau-Tong Dai, W. Y. Weng
Publikováno v:
Solar Energy Materials and Solar Cells. 98:494-498
The growth of ZnO nanowires (NWs) on a zinc oxide (ZnO)/textured crystalline-Si (c-Si) photovoltaic device via the hydrothermal method is investigated. The average length and diameter of the ZnO NWs are around 0.65 μm and 70–100 nm, respectively.
Publikováno v:
Electrochemistry Communications, Vol 18, Iss, Pp 4-7 (2012)
We have used 1.5 wt.% of nanodiamonds having three different sizes such as 5, 50 and 250 nm for making the hybrid active layer. As the nanodiamond size increased, the root mean square (rms) roughness also increased in the film. The film with nanodiam
Publikováno v:
Solar Energy Materials and Solar Cells. 95:154-157
Silicon nanowire (SiNW) arrays were grown directly on a P type Si substrate, pre-deposited with gold catalyst, and then made into solar cell for photovoltaic characteristic measurement. Different growth conditions of SiNWs, including variation of the
Autor:
Chia-Chin Chen, Bau-Tong Dai, Ming-Chih Cheng, Heng-Chuan Kan, Lee-Her Hu, Chien-Wei Liu, Guey-Shin Chang
Publikováno v:
Sensors and Actuators A: Physical. 157:140-149
In the present work, a micro-thruster chip with dimension of 19.5 mm × 9.5 mm was fabricated with MEMS technologies for the experiment study of vaporizing liquid micro-thruster. In addition, a full 3D computational model was constructed to simulate
Autor:
Chien-Wei Liu, Chen-Pang Tsai, Jin-Tsong Jeng, Kuei-Shu Chang-Liao, Chin-Lung Cheng, Bau-Tong Dai
Publikováno v:
Microelectronic Engineering. 86:1692-1695
Silicon-oxide-nitride-oxide-silicon devices with nanoparticles (NPs) as charge trapping nodes (CTNs) are important to provide enhanced performance for nonvolatile memory devices. To study these topics, the TiO"xN"y metal oxide NPs embedded in the HfO
Publikováno v:
Journal of Alloys and Compounds. 475:698-701
Synthesis and luminescence properties of CaNb2O6 oxides by the sol–gel process were investigated. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTE
Autor:
Jin-Tsong Jeng, Kuei-Shu Chang-Liao, Chien-Wei Liu, Chin-Lung Cheng, Sung-Wei Huang, Ping-Hung Tsai, Bau-Tong Dai
Publikováno v:
Solid-State Electronics. 52:1530-1535
The CoxNiyO hybrid metal oxide nanoparticles (HMONs) embedded in the HfOxNy high-k dielectric as charge trapping nodes of the nonvolatile memory devices have been formed via the chemical vapor deposition using the Co/Ni acetate calcined and reduced i