Zobrazeno 1 - 10
of 34
pro vyhledávání: '"Bartłomiej Podsiadły"'
Publikováno v:
Micromachines, Vol 13, Iss 8, p 1203 (2022)
With recent developments in conductive composites, new possibilities emerged for 3D printed conductive structures. Complementary to a vast number of publications on materials properties, here we investigate the influence of printing parameters on the
Externí odkaz:
https://doaj.org/article/7711b2b636f44b978ef9dadf1e50f4ac
Publikováno v:
Applied Sciences, Vol 12, Iss 3, p 941 (2022)
The following paper presents a simple, low-cost, and repeatable manufacturing process for fabricating conductive, elastic carbon-elastomer nanocomposite fibers for applications in the textile industry and beyond. The presented method allows for the m
Externí odkaz:
https://doaj.org/article/dc33a5011db048758f32229351e8fa78
Autor:
Piotr Walter, Bartłomiej Podsiadły, Marcin Zych, Michał Kamiński, Andrzej Skalski, Tomasz Raczyński, Daniel Janczak, Małgorzata Jakubowska
Publikováno v:
Sensors, Vol 22, Iss 3, p 800 (2022)
Rapid growth of personal electronics with concurrent research into telerehabilitation solutions discovers opportunities to redefine the future of orthopedic rehabilitation. After joint injury or operation, convalescence includes free active range of
Externí odkaz:
https://doaj.org/article/08c581401bc94665abf2fd0212d3e771
Publikováno v:
Materials, Vol 14, Iss 14, p 3850 (2021)
Rapid development of additive manufacturing and new composites materials with unique properties are promising tools for fabricating structural electronics. However, according to the typical maximum resolution of additive manufacturing methods, there
Externí odkaz:
https://doaj.org/article/78b1e48669134462957308c74b8e2c8e
Publikováno v:
Applied Sciences, Vol 11, Iss 15, p 6946 (2021)
In this paper, we are focusing on comparing results obtained for polymer elements manufactured with injection molding and additive manufacturing techniques. The analysis was performed for fused deposition modeling (FDM) and single screw injection mol
Externí odkaz:
https://doaj.org/article/52a87df79a9245cba3cfc32bc7f7d1fc
Publikováno v:
Applied Sciences, Vol 11, Iss 3, p 1272 (2021)
In this publication, we describe the process of fabrication and the analysis of the properties of nanocomposite filaments based on carbon nanotubes and acrylonitrile butadiene styrene (ABS) polymer for fused deposition modeling (FDM) additive manufac
Externí odkaz:
https://doaj.org/article/9f508e211b6a4b4e8d8a734a55f310f0
Autor:
Sandra Lepak-Kuc, Bartłomiej Podsiadły, Andrzej Skalski, Daniel Janczak, Małgorzata Jakubowska, Agnieszka Lekawa-Raus
Publikováno v:
Nanomaterials, Vol 9, Iss 9, p 1287 (2019)
The following paper presents a simple, inexpensive and scalable method of production of carbon nanotube-polyurethane elastomer composite. The new method enables the formation of fibers with 40% w/w of nanotubes in a polymer. Thanks to the 8 times hig
Externí odkaz:
https://doaj.org/article/a530afb7db28415287e5091d9e4fe38f
Publikováno v:
Applied Sciences, Vol 11, Iss 6946, p 6946 (2021)
Applied Sciences
Volume 11
Issue 15
Applied Sciences
Volume 11
Issue 15
In this paper, we are focusing on comparing results obtained for polymer elements manufactured with injection molding and additive manufacturing techniques. The analysis was performed for fused deposition modeling (FDM) and single screw injection mol
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e5f7d132a056179e82dcf9bb84ccd1b4
https://www.mdpi.com/2076-3417/11/15/6946
https://www.mdpi.com/2076-3417/11/15/6946
Publikováno v:
Periodica Polytechnica Electrical Engineering and Computer Science. 63:94-98
Structural Electronics is a modern, still developing technique of manufacturing electrical circuit merged with a mechanical construction of device. This approach opens new possibilities like higher components density, cost effective short series and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::82438939bc216ef387562f8727e0030d
https://doi.org/10.3311/ppee.13518
https://doi.org/10.3311/ppee.13518
Autor:
Lucja Dybowska-Sarapuk, Marcin Słoma, Bartłomiej Podsiadły, Daniel Janczak, Małgorzata Jakubowska
Publikováno v:
Circuit World. 45:26-30
Purpose A comparison of electric and viscosity percolation threshold is crucial from the scientific and technical points of view to understand the features and capabilities of heterogeneous graphene composite materials and properly select the functio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::71f0f400955021ce243493828876c106
https://doi.org/10.1108/cw-11-2018-0094
https://doi.org/10.1108/cw-11-2018-0094