Zobrazeno 1 - 10
of 60
pro vyhledávání: '"Bao-Feng Guo"'
Publikováno v:
Case Studies in Construction Materials, Vol 19, Iss , Pp e02617- (2023)
Steel slag composite grout (SSCG) was prepared by a large amount of steel slag (SS) to reinforce expressway photovoltaic (PV) slopes and reduce carbon emission. Laboratory tests were conducted to investigate SSCG properties, including flowability, ef
Externí odkaz:
https://doaj.org/article/87d8802f0bbb443eb45ab9390f3c53a9
Publikováno v:
Ceramics International. 47:6562-6572
Alumina inclusions in commercial as-cast 2.25Cr1Mo0.25V aluminum deoxidized steel exhibited a feature of porous structure. In order to investigate the crushing characteristics of alumina inclusion during hot working, a series of alumina blocks with d
Publikováno v:
International orthopaedics. 46(3)
Purpose To summarize the evolution of Ilizarov technology in China, highlight important milestones, introduce the atmosphere of the era concerning the first uses and development of this technology, and share Chinese modification and experience in thi
Publikováno v:
Materials Science and Engineering: A. 756:405-416
It is well known that the adverse effects of inclusions on the performance of a substrate are not negligible. Currently, as the level of smelting improves, the inclusion content in molten steel has been greatly reduced, but a completely pure material
Publikováno v:
Materials Science and Engineering: A. 746:239-247
In order to study the influence of inclusions on the deformation behavior of matrix, SEM data and EBSD data were collected under various loads by means of an in-situ tensile test. Specifically, the effect of MnS inclusions on the deformation behavior
Publikováno v:
Journal of Iron and Steel Research International. 26:941-952
The influence of the MnS plastic inclusion on the accumulation of internal damage was considered, and the Gurson–Tvergaard–Needleman (GTN) model was calibrated based on the finite element inverse method and image analysis method using ABAQUS and
Publikováno v:
Transactions of Nonferrous Metals Society of China. 28:2082-2093
A novel method for testing stress–strain curves of non-metallic materials was presented. The high temperature stress–strain curves of MnS were preliminarily obtained and corrected to account for the influence of friction. Using the finite element
Publikováno v:
Journal of Materials Engineering and Performance. 27:5350-5359
To improve the mechanical properties of aluminum alloy forgings, solution treatment and quenching is necessary. However, it becomes difficult to control the residual stress and deformation after solution treatment and quenching which always results i
Publikováno v:
Metallurgical and Materials Transactions A. 48:2336-2348
Hot deformation behavior of 7A85 high-strength aluminum alloy was investigated at 593 K to 713 K (320 °C to 440 °C) and 0.01-10 s−1. The manifestation of flow curves was related to the strain rate. Typical single-peak curves were shown below 10 s
Publikováno v:
Procedia Engineering. 207:657-662
The tensile deformation behavior of a lean duplex stainless steel with metastable austenite phase was investigated after annealing at temperature ranges of 1000-1200°C. The evolution of microstructure during deformation was characterized by transmis