Zobrazeno 1 - 10
of 26
pro vyhledávání: '"Baixing Liu"'
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 8229-8241 (2023)
The welding heat affected zone (HAZ) is a high-risk region of corrosion, and influenced by multi-factors, such as stress, microbe and microstructure. Sulfate reducing bacteria (SRB) enhance the corrosion of the stressed HAZs, especially coarse-graine
Externí odkaz:
https://doaj.org/article/dae2c27b50de4ef3acea7ef741d383fe
Publikováno v:
International Journal of Pressure Vessels and Piping. 203:104924
Publikováno v:
Journal of Materials Engineering and Performance. 27:2345-2353
Plasma electrolytic oxidation (PEO) coatings were prepared on low carbon steel from electrolytes with different silicate concentrations. The microstructure, elemental and phase compositions of the PEO coatings were analyzed by scanning electron micro
Publikováno v:
Ceramics International. 43:16851-16858
The plasma electrolytic oxidation (PEO) coatings were prepared on low carbon steel from silicate electrolyte without and with Al nanoparticles, respectively. The structure, composition, anti-wear and anti-corrosion properties of the PEO coatings were
Publikováno v:
Vacuum. 144:207-216
Plasma electrolytic oxidation (PEO) coating was prepared from aluminate electrolyte on low carbon steel. The structure, composition, microhardness, anti-wear and anti-corrosion properties of the PEO coating were explored. The results show that the PE
Publikováno v:
Surface Engineering. 34:54-62
Two kinds of PEO coatings were prepared on low carbon steel from aluminate electrolyte and silicate electrolyte, respectively. The coating surface and cross-section morphologies were observed by scanning electron microscope. The elemental and phase c
Publikováno v:
Surface and Coatings Technology. 309:67-74
Electroless Ni-P coating is helpful to improve the corrosion resistance and mechanical properties of the Al alloys. However, the electroless Ni-P plating is usually operated at higher temperature (above 80 °C, even up to 90 °C) in order to achieve
Publikováno v:
Electrochimica Acta. 222:1272-1280
Deep eutectic solvent (DES), as a promising electrolyte for composite electrodeposition, can effectively reduce the agglomeration of nanoparticles in the electroplating bath and increase the content of nanoparticles in the metal matrix compared with
Publikováno v:
Chinese Journal of Polymer Science. 34:1448-1455
Polytetrafluoroethylene (PTFE) was irradiated with protons in a ground-based simulation facility to study the effects of proton irradiation on the structural and tribological properties of PTFE. The structural changes were characterized by X-ray phot
Publikováno v:
Surface and Interface Analysis. 49:112-116
Based on the ground-based simulation facility, the effects of atomic oxygen (AO) irradiation on the structural and tribological properties of pure polytetrafluoroethylene (PTFE) and carbon fiber and MoS2-filled PTFE composites were studied by scannin