Zobrazeno 1 - 10
of 36
pro vyhledávání: '"B. Melve"'
Publikováno v:
Composites Part A: Applied Science and Manufacturing. 40:1364-1380
On ships, tankers and similar vessels structural defects such as cracks and corrosion damage are typically repaired by welding. However, welding is unwanted hotwork on floating offshore units (FOUs) such as floating, production, storage and offloadin
Publikováno v:
Engineering Failure Analysis. 14:1594-1604
Fatigue behavior of polyvinylidiene fluoride (PVDF) pipes is investigated under low temperatures to characterize the temperature effects. The analysis included experimental evaluation of fatigue life for test samples taken directly from the manufactu
Publikováno v:
Journal of Reinforced Plastics and Composites. 14:362-377
Ultrasonic measurements have been performed with two typical GRP pipe materials, and it was found that the attenuation increased approximately linearly with frequency, thus implying that low frequency transducers should be used for inspection. By com
Publikováno v:
CEIDP '05. 2005 Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2005..
The main objective of this work was to examine the electrical properties of the XLPE insulation system subjected to very high temperatures in wet environments. The test program included thermo-electrical ageing of XLPE cable models. The ageing was ca
Autor:
B. Melve
Publikováno v:
Developments in the Science and Technology of Composite Materials ISBN: 9789401068413
Filament wound tubes of glassfibre/epoxy, glassfibre/polyester and glassfibre/polyester with a surface mat were tested in three point bending with acoustic emission monitoring. In order to distinguish better between the layups, the tubes were subject
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3426c45d99358927ded0f0b4acc62607
https://doi.org/10.1007/978-94-009-0787-4_99
https://doi.org/10.1007/978-94-009-0787-4_99
Publikováno v:
NDT & E International. 25:95
Publikováno v:
International Journal of Fracture. 34:R7-R13
Autor:
Anthony J. Kinloch, D.R. Moore, Carlos A. C. C. Rebelo, K. Friedrich, G. McGrath, J. G. Williams, N. Burgoyne, H. H. Kausch, G.E. Hale, H. Wittich, R. Prediger, A. Torres Marques, J. Jaussaud, R. Lee, M. Fischer, P. Davies, Ivana K. Partridge, P. Czarnocki, F. Ramsteiner, Ignace Verpoest, I. M. Robinson, A. Pavan, S. Andersen, D. Martin, Maria N. Charalambides, B Goffaux, N. Trigwell, K. Walls, D. Neville, B. Melve, Y. Giraud, N. Roux
Publikováno v:
CIÊNCIAVITAE
Scopus-Elsevier
Scopus-Elsevier
This paper summarizes results from a series of tests performed in eighteen laboratories with three specific aims: first, to establish the reproducibility of values from mode I and mode II tests carried out on two materials in different laboratories;
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::13bdbe9cbe08d255de7d666bf708635e
http://www.scopus.com/inward/record.url?eid=2-s2.0-0026627232&partnerID=MN8TOARS
http://www.scopus.com/inward/record.url?eid=2-s2.0-0026627232&partnerID=MN8TOARS
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.