Zobrazeno 1 - 10 of 38 pro vyhledávání: '"B. A. Glowacki"'
1
Akademický článek
Infiltration of commercially available, anode supported SOFC’s via inkjet printing
Autor: T. B. Mitchell-Williams, R. I. Tomov, S. A. Saadabadi, M. Krauz, P. V. Aravind, B. A. Glowacki, R. V. Kumar
Publikováno v: Materials for Renewable and Sustainable Energy, Vol 6, Iss 2, Pp 1-9 (2017)
Abstract Commercially available anode supported solid oxide fuel cells (NiO-8YSZ/8YSZ/LSCF- 20 mm in diameter) were anode infiltrated with gadolinium doped ceria (CGO) using a scalable drop-on-demand inkjet printing process. Cells were infiltrated wi
Externí odkaz: https://doaj.org/article/34b3b06bb6a4436699e8e6512f03de9e
Zobrazit plný text záznamu
3
The influence of unidirectional copper alloying on the critical current density of MgB2
Autor: B A Glowacki, S K Chen
Publikováno v: Superconductor Science and Technology. 19:116-121
Inward unidirectional copper diffusion into a pellet and the resulting alloying of Cu–Mg during in situ reaction of MgB2 were studied. The reaction between the copper and magnesium occurred at as low a temperature as 660 °C in a flowing argon atmo
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::102e8a3360e8bcfe673bc141a235c9cb
https://doi.org/10.1088/0953-2048/19/1/019
Zobrazit plný text záznamu
4
Modelling theV-Icharacteristic of coated conductors
Autor: N A Rutter, B A Glowacki
Publikováno v: Superconductor Science and Technology. 14:680-684
The critical current densities of coated conductor samples are limited by the presence of low-angle grain boundaries. These boundaries provide an obstacle to current flow, which is determined by their misorientation angle. The superconducting layer o
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::104456a1fcfeee297570aa0533eb58de
https://doi.org/10.1088/0953-2048/14/9/309
Zobrazit plný text záznamu
6
Influence of the cold deformation procedures on the critical current distribution in Ag‐(Bi,Pb)2Sr2Ca2Cu3Oxtapes
Autor: B. A. Glowacki, J. Jackiewicz
Publikováno v: Journal of Applied Physics. 75:2992-2997
Dramatic differences are reported between the transversal and longitudinal in‐plane transport critical current of the Ag‐(Bi,Pb)2Sr2Ca2Cu3Ox tape form conductor for longitudinally rolled, uniaxially pressed, and transversely rolled tapes. An expl
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::5e9660c473eb29e703873d9d5c1e734a
https://doi.org/10.1063/1.356196
Zobrazit plný text záznamu
7
Direct Ceramic Inkjet Printing and Infiltration of Functional Coatings for Metal Supported SOFC
Autor: Venkatesan V. Krishnan, Vasant R Kumar, K. Balasubramanian, Rumen I. Tomov, B A Glowacki, A Fakeeh
Publikováno v: ECS Meeting Abstracts. :344-344
Direct Ceramic Inkjet Printing (DCIJP) was applied as a technology for the fabrication of anodes, electrolytes and cathodes coatings for metal-supported SOFCs. Drop-on demand electromagnetic nozzles with orifice diameter of 100 microns were utilized
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8720a6a06da30362b5d507dedd5237e0
https://doi.org/10.1149/ma2015-03/1/344
Zobrazit plný text záznamu
8
Fabrication of Bimetallic (NiFe) Anode-Supported SOFCs with Direct Ceramic Inkjet Printing
Autor: A Fakeeh, R I Tomov, Vasant R Kumar, B A Glowacki
Publikováno v: ECS Meeting Abstracts. :191-191
Anode-supported solid oxide fuel cells (SOFCs) based on nickel-iron supports were fabricated, and their performance evaluated at the intermediate temperatures. The ratio of NiO to Fe2O3 in the metal support was 7 to 3 on a molar basis. Fe2O3 and NiO
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::40475498d51e95a00106b9e477add598
https://doi.org/10.1149/ma2015-03/1/191
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje