Zobrazeno 1 - 10
of 33
pro vyhledávání: '"Błażej Bałasz"'
Publikováno v:
Materials, Vol 17, Iss 18, p 4604 (2024)
Additive manufacturing from metal powders using selective laser melting technology is gaining increasing interest in various industries. The purpose of this study was to determine the effect of changes in process parameter values on the relative dens
Externí odkaz:
https://doaj.org/article/98590c1e7c2f473fa88e01f405b4deea
Publikováno v:
Materials, Vol 17, Iss 10, p 2420 (2024)
In this article, the results of research on a NiTi alloy with a high nickel content (51.7 at.%), produced using the additive technology SLM method and subjected to isothermal ageing after solution annealing, are presented. The study involved the dete
Externí odkaz:
https://doaj.org/article/e358ee4080374f859b9dfd4f6324fb07
Publikováno v:
Materials, Vol 16, Iss 8, p 3196 (2023)
Triply periodic minimal surfaces (TPMS) are structures inspired by nature with unique properties. Numerous studies confirm the possibility of using TPMS structures for heat dissipation, mass transport, and biomedical and energy absorption application
Externí odkaz:
https://doaj.org/article/9599674aa6524a1a92564d24d192eb95
Publikováno v:
Tehnički Vjesnik, Vol 27, Iss 3, Pp 725-731 (2020)
The paper describes a new method of determining abnormal states and the way they are detected on GT8C turbine. The system of dividing measured parameters into three groups has been suggested. The paper puts the emphasis on the issue of identifying re
Externí odkaz:
https://doaj.org/article/e1f3d14daf654fc5b90edf890d73fa89
Publikováno v:
Materials, Vol 15, Iss 12, p 4352 (2022)
The development of additive manufacturing techniques has made it possible to produce porous structures with complex geometry with unique properties as potential candidates for energy absorption, heat dissipation, biomedical, and vibration control app
Externí odkaz:
https://doaj.org/article/fd6b3c97239e494faac3245d5dbdb7be
Publikováno v:
Materials, Vol 14, Iss 24, p 7904 (2021)
The paper describes an automated method for grinding small ceramic elements using a hyperboloid wheel. The problem of automating the process of machining elements made of nonmagnetic materials with a small area and low height has been solved. Automat
Externí odkaz:
https://doaj.org/article/ddb6cc32ace64d7eb012304d97c91a0e
Publikováno v:
Materials, Vol 14, Iss 15, p 4165 (2021)
The dynamic impact of a water jet with a periodically changing structure can be used in various industries. The paper presents a design solution for a self-excited pulse head. This head can be used in mining for drilling holes and breaking rocks. The
Externí odkaz:
https://doaj.org/article/b6eb1e07a1b645aab50de7fcf5a32614
Publikováno v:
Materials, Vol 14, Iss 8, p 2042 (2021)
A simulation model and the results of experimental tests of a vibration generator in applications for the hot-dip galvanizing process are presented. The parameters of the work of the asynchronous motor forcing the system vibrations were determined, a
Externí odkaz:
https://doaj.org/article/43fa2687a3ef47208e4583b04aa7dad2
Publikováno v:
Materials, Vol 13, Iss 24, p 5835 (2020)
Modeling of material displacements in the microcutting zone is complex due to the number and interdependence of factors affecting the results of the process. An important problem in the modeling process is the selection of the constitutive model and
Externí odkaz:
https://doaj.org/article/796cba4a6f3f424f9d6e1b8120d9ee44
Autor:
Dorota Laskowska, Błażej Bałasz, Witold Kaczorowski, Jacek Grabarczyk, Lucie Svobodova, Tomasz Szatkiewicz, Katarzyna Mitura
Publikováno v:
Coatings; Volume 12; Issue 10; Pages: 1373
The DLC coating of samples produced by additive manufacturing with complex shapes is a challenge but also shows the possibility of obtaining a diffusive barrier for biomedical applications. In this study, stochastic porous structures based on Voronoi