Zobrazeno 1 - 10
of 8 050
pro vyhledávání: '"Az31"'
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 7818-7828 (2024)
This study investigates the variations in the microstructure and mechanical properties of a rolled Mg-3.0Al-0.8Zn-0.3Mn (AZ31, wt.%) alloy caused by ultrasonic nanocrystal surface modification (UNSM) treatment and subsequent annealing. The UNSM-treat
Externí odkaz:
https://doaj.org/article/cfc874a3f19440ca847a6c92c12f7594
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-11 (2024)
Abstract In this study, the effect of ultrasonic vibration during Friction Stir Vibration Processing (FSVP) on the microstructure and mechanical behaviour of AZ31/TiC surface composites was investigated. Specifically, Titanium Carbide (TiC) particles
Externí odkaz:
https://doaj.org/article/4a146bbb55c24450996f2a1976cb161f
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 5821-5837 (2024)
As a lightweight structural material, Mg alloy is expected to have a broad application prospect. However, due to its poor wear resistance and corrosion resistance, its application range is greatly limited. In this paper, wear resistant and corrosion
Externí odkaz:
https://doaj.org/article/8ac64d970e8b40ed9ba4bae23dd8f1ef
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 180-192 (2024)
AZ31 Mg alloy thin walls are prepared using wire arc additive manufacturing (WAAM) and interlayer ultrasonic impact (UI) techniques with cold metal transition (CMT) serving as the heat source. The microstructure, mechanical and corrosion properties o
Externí odkaz:
https://doaj.org/article/c60ba5d2129444108d9e37d7cae89333
Autor:
Mosab Kaseem, Ananda Repycha Safira, Mohammad Aadil, Talitha Tara Thanaa, Arash Fattah-alhosseini
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 10, Pp 4205-4218 (2024)
Advanced hybrid materials with unique properties are essential for addressing the demands of increasingly complex applications. Despite their importance, the self-assembly of layered double hydroxides (LDH) with metallic oxide nanoparticles and dicar
Externí odkaz:
https://doaj.org/article/191a99774da44059b7ef89f238cc8ca3
Publikováno v:
Journal of Magnesium and Alloys, Vol 12, Iss 9, Pp 3685-3697 (2024)
At present, there are few studies on the phase transition during the thermocompression plastic deformation of magnesium alloy. In this study, the evolution model of thermal compression plastic of AZ31 magnesium alloy was constructed by molecular dyna
Externí odkaz:
https://doaj.org/article/00ef3a1f17be47f1918a0c3769ee4021
Publikováno v:
Journal of Materials Research and Technology, Vol 32, Iss , Pp 2326-2333 (2024)
In this study, a novel localized selective remelting technique was proposed to treat the welding interface regions on the top and bottom surfaces of the AZ31 friction stir welded joint. Compared with the untreated joint, the treated joint achieved a
Externí odkaz:
https://doaj.org/article/c3ab0ee2204b403d8d4f501e6588c790
Publikováno v:
Scientific Reports, Vol 14, Iss 1, Pp 1-14 (2024)
Abstract The primary objective of this study is to investigate the microstructural, mechanical, and wear behaviour of AZ31/TiC surface composites fabricated through friction stir processing (FSP). TiC particles are reinforced onto the surface of AZ31
Externí odkaz:
https://doaj.org/article/4e3abf69ba624eea8699ffe50e95aa3b
Publikováno v:
Virtual and Physical Prototyping, Vol 19, Iss 1 (2024)
TC4 particles reinforced AZ31 composite was successfully prepared by innovatively using simultaneous feeding method of powder and wire in wire-arc directed energy deposition (WA-DED). The results indicated that TC4 particles are expected to be evenly
Externí odkaz:
https://doaj.org/article/17fb32e339164b618989a77ead25e66e
Autor:
Muni Tanuja Anantha, Sireesha Koneru, Parameshwaran Pillai Thiruvambalam Pillai, Nageswara Rao Boggarapu, Tanya Buddi, Kseniia Iurevna Usanova, Rajesh Deorari
Publikováno v:
Cogent Engineering, Vol 11, Iss 1 (2024)
The motive of this study is to evaluate the machinability properties of AZ31 Mg alloy in the face milling operations. Depth of cut, rate of feed and speed of cut are three input variables in the face milling process, while surface roughness (Ra) and
Externí odkaz:
https://doaj.org/article/a1bcad5477f244bbb191fbdc77f65390