Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Ayoub Al-Zabidi"'
Autor:
Naveed Ahmed, Ateekh Ur Rehman, Kashif Ishfaq, Rakhshanda Naveed, Khaja Moiduddin, Usama Umer, Adham E Ragab, Ayoub Al-Zabidi
Publikováno v:
Materials, Vol 13, Iss 20, p 4523 (2020)
Titanium-aluminium-vanadium (Ti 6Al 4V) alloys, nickel alloys (Inconel 718), and duraluminum alloys (AA 2000 series) are widely used materials in numerous engineering applications wherein machined features are required to having good surface finish.
Externí odkaz:
https://doaj.org/article/104053ef541f4dd18806c6b2b9937dc8
Publikováno v:
Materials, Vol 13, Iss 12, p 2685 (2020)
The development of layered/clad composites with a blend of desired characteristics has emerged as a valuable substitute for expensive materials. The inherent heterogeneity offers challenges whenever the cutting of cladded plates/sheets is to be done.
Externí odkaz:
https://doaj.org/article/a718060e00e14b9e92da1860d42d1c52
Autor:
Naveed Ahmed, Madiha Rafaqat, Kashif Ishfaq, Ateekh Ur Rehman, Adeel Hassan, Usama Umer, Adham Ezzat Ragab, Ayoub Al-Zabidi
Publikováno v:
Materials, Vol 12, Iss 10, p 1674 (2019)
During laser milling, the objective is not always to maximize the material removal rate (MRR). Milling of new material with targeted MRR is challenging without prior knowledge and established sets of laser parameters. The laser milling performance ha
Externí odkaz:
https://doaj.org/article/dab042ca84554abba27498bfec070d7e
Publikováno v:
Case Studies on Transport Policy. 10:2563-2575
Autor:
Ning He, Mohammed Alkahtani, Mustufa Haider Abidi, Aqib Mashood Khan, Ghulam Hussain, Ayoub Al-Zabidi
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 112:731-743
There is a need to replace non-sustainable conventional coolant (emulsion) with eco benign high-performance cutting fluids such as biodegradable nanofluids that exhibit sufficient lubrication and cooling properties. Also, the sustainability performan
Autor:
Syed Waqar Ahmed, Ayoub Al-Zabidi, Ghulam Hussain, Mustufa Haider Abidi, Mohammed Alkahtani, Khurram Altaf, Sadaqat Ali
Publikováno v:
Polymers, Vol 12, Iss 2155, p 2155 (2020)
Polymers
Volume 12
Issue 9
Polymers
Volume 12
Issue 9
The scope of additive manufacturing, particularly fused deposition modelling (FDM), can indeed be explored with the fabrication of multi-material composite laminates using this technology. Laminar composite structures made up of two distinct material
Publikováno v:
Materials, Vol 13, Iss 2685, p 2685 (2020)
Materials
Volume 13
Issue 12
Materials
Volume 13
Issue 12
The development of layered/clad composites with a blend of desired characteristics has emerged as a valuable substitute for expensive materials. The inherent heterogeneity offers challenges whenever the cutting of cladded plates/sheets is to be done.
Publikováno v:
Arabian Journal for Science and Engineering. 44:2551-2565
An empirical study aims to investigate the development in the research on the assessment of supply chain agility. Here, a state-of-the-art literature review of research conducted between 2000 and 2017 is presented to provide a comprehensive basis for
Autor:
Kashif Ishfaq, Usama Umer, Ateekh Ur Rehman, Adham E. Ragab, Ayoub Al-Zabidi, Adeel Hassan, Madiha Rafaqat, Naveed Ahmed
Publikováno v:
Materials, Vol 12, Iss 10, p 1674 (2019)
Materials
Volume 12
Issue 10
Materials
Volume 12
Issue 10
During laser milling, the objective is not always to maximize the material removal rate (MRR). Milling of new material with targeted MRR is challenging without prior knowledge and established sets of laser parameters. The laser milling performance ha
Publikováno v:
Sustainability
Volume 13
Issue 4
Sustainability, Vol 13, Iss 1752, p 1752 (2021)
Volume 13
Issue 4
Sustainability, Vol 13, Iss 1752, p 1752 (2021)
Worldwide business organizations realize that agility of sustainable supply-chain is a requisite need for survival in a dynamic, competitive, and unpredictable market. The contribution of this research is to explore and evaluate sustainable agility i