Zobrazeno 1 - 6
of 6
pro vyhledávání: '"Aykut Canakcı"'
Autor:
Emre Deniz Yalçin, Aykut Çanakçi
Publikováno v:
Tehnički Glasnik, Vol 17, Iss 4, Pp 620-627 (2023)
In this study, ZA40/ MWCNT composites were produced by using powder metallurgy technique and hot press method by adding 0,5-1-1,5-2% wt. MWCNT to ZA40 alloy. Powders made with mechanical alloys were sintered by hot pressing for 3 hours under 500 °C
Externí odkaz:
https://doaj.org/article/92f9a040e4f54ee58c30e3d347d21b44
Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology
Autor:
S. Suresh Kumar, F. Erdemir, Temel Varol, S. Thirumalai Kumaran, M. Uthayakumar, Aykut Canakci
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 3, Iss 2, Pp 127-135 (2020)
Aluminum based composites are widely used in various engineering applications. Though the processing of these materials is easy, it requires advanced machining techniques to cut the same as it becomes harder after the addition of ceramic reinforcemen
Externí odkaz:
https://doaj.org/article/a47bcdf2ddfa4b3aa88dbcaf9bc3917e
Publikováno v:
Results in Physics, Vol 15, Iss , Pp - (2019)
In this study, the effect of the addition of nano-graphite and nano-alumina particles on the corrosion behavior and microstructures of ZA27 matrix hybrid nanocomposites (HNCs) was investigated. ZA27 based HNC powders were produced using mechanical mi
Externí odkaz:
https://doaj.org/article/de1b8d6e2aee4838832dc899bada716e
Publikováno v:
European Oral Research, Vol 54, Iss 1, Pp 16-24 (2020)
Purpose Cavity disinfection, in addition to routine caries removal methods, is recommended to eliminate the microorganisms. The aim of this study was to compare the effect of various systems Er,Cr:YSGG lasers, diode lasers and FotoSan and agents Cors
Externí odkaz:
https://doaj.org/article/6414be8cc23d471f816ed4b0f8c89fb3
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 4, Iss 1, Pp 127-144 (2021)
Electrical discharge machining (EDM) is a non-conventional machining process which was developed to machine hard to cut materials for the past few decades. In addition to this, it also used to modify the surface characteristics of the material throug
Externí odkaz:
https://doaj.org/article/3e6a79db98f14903978d854cd536113f
Publikováno v:
Defence Technology, Vol 15, Iss 3, Pp 338-343 (2019)
In the present work, the surface characteristics of Electrical Discharge Machined (EDM) Al (6351)SiC and Al (6351)SiCB4C composites are investigated. The composites are prepared by employing the conventional stir casting technique, as it can
Externí odkaz:
https://doaj.org/article/2107c3b2e7d848cdab62a04c5f10a6d2