Zobrazeno 1 - 10
of 42
pro vyhledávání: '"Atthakorn Thongtha"'
Publikováno v:
Medžiagotyra (2024)
The objective of this study is to improve the thermal characteristics of gypsum ceiling boards intended for building envelope applications, focusing on enhancing energy efficiency by integrating graphite-infused phase change material (PCM). The inves
Externí odkaz:
https://doaj.org/article/cd385bb206c94dacb028456bab03256c
Publikováno v:
Buildings, Vol 14, Iss 1, p 68 (2023)
This research focuses on the thermal properties of three distinctive paraffin waxes—PCMA, PCMB, and PCMC—each characterized by a specific melting point. The crucial phase transition temperature intervals and latent heat values were examined using
Externí odkaz:
https://doaj.org/article/48c778b4febc404884ecd1c91df3817e
Publikováno v:
Energies, Vol 16, Iss 22, p 7545 (2023)
This study investigates the properties of light transmission and distribution, examining how incident light angles impact illuminance distribution and daylight factor. Light tubes are acknowledged as promising tools to enhance lighting conditions and
Externí odkaz:
https://doaj.org/article/90c6e79062da4e799e5cfb7c4387cace
Publikováno v:
Buildings, Vol 12, Iss 1, p 60 (2022)
The application of AAC has increased considerably in Malaysia since the 1990s. The usage of AAC has some advantages, but it also has negative environmental impacts since rejected concrete will become landfill. This study aimed to use AAC waste powder
Externí odkaz:
https://doaj.org/article/cfe1a51b6ef343fa959dc75f7f85d435
Publikováno v:
Medžiagotyra, Vol 23, Iss 2, Pp 161-165 (2017)
This work is focused on enhancing the thermal effectiveness of autoclaved aerated concrete (AAC) by the application of phase change material (PCM) as a coating. The dynamics of heat transfer and the cooling load of air conditioning system in the two
Externí odkaz:
https://doaj.org/article/89408e6a1a9e4bfe887612555a76f126
Autor:
Jiraphorn Mahawan, Atthakorn Thongtha
Publikováno v:
Energies, Vol 14, Iss 2, p 260 (2021)
This work investigates the light illumination intensity, light transmission performance, light distribution on the floor, and daylight factor of vertical light hollow tubes at various incident elevation angles of a light source. The light tubes were
Externí odkaz:
https://doaj.org/article/7cfae2eacd8842e7a6d100010c8d1046
Autor:
Atthakorn Thongtha, Piromporn Boontham
Publikováno v:
Energies, Vol 13, Iss 10, p 2528 (2020)
This research focuses on the use of natural lighting integrated into buildings. Cylindrical glass was fitted into the top of our test model, which was 1 m × 1 m × 1 m, which enhanced the light inside it. The glass fitted comprised a single layer (G
Externí odkaz:
https://doaj.org/article/d8938fd3653a4b0eaea0d9d07b78d2d0
Autor:
Atthakorn Thongtha, Chanita Mano
Publikováno v:
Journal of Renewable Materials. 9:495-506
Autor:
Piromporn Boontham, Atthakorn Thongtha
Publikováno v:
Energies, Vol 13, Iss 2528, p 2528 (2020)
Energies; Volume 13; Issue 10; Pages: 2528
Energies; Volume 13; Issue 10; Pages: 2528
This research focuses on the use of natural lighting integrated into buildings. Cylindrical glass was fitted into the top of our test model, which was 1 m × 1 m × 1 m, which enhanced the light inside it. The glass fitted comprised a single layer (G
Publikováno v:
Key Engineering Materials. 751:521-526
This research concentrates to the effect of changing sand proportion on the physical, mechanical and thermal properties of building wall materials (Cellular lightweight concrete). The density, water absorption and compressive strength of the 7.0 cm x