Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Aslı Günay Bulutsuz"'
Autor:
Aslı Günay Bulutsuz
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol 9, Iss 1, Pp 467-479 (2021)
Çalışma kapsamında Saf Zn tozlarına Yüksek Basınç Altında Burma (YBAB) uygulanarak ince taneli yapılar elde edilmiştir. 1, 5 ve 10 rotasyondan sonra elde edilen numunelerin, mikro yapıları, mekanik özellikleri ve çözünme davranışla
Externí odkaz:
https://doaj.org/article/66f3440672dd4f309b6a0dda3f245189
Autor:
Aslı Günay Bulutsuz
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol 8, Iss 1, Pp 1072-1083 (2020)
Medikal, ulaşım, enerji gibi endüstriyel alanlarda birçok farklı kullanım amacına uygun olarak hidrofilik ve hidrofobik yüzey karakterlerine ihtiyaç duyulmaktadır. Farklı modifikasyon teknikleri kullanarak yüzeylerin kimyasal ve fiziksel
Externí odkaz:
https://doaj.org/article/0b3ef66c6f7140428bb7b0417df51595
Autor:
Witold Chrominski, Aslı Günay Bulutsuz
Publikováno v:
Transactions of the Indian Institute of Metals. 74:69-77
In this experimental study, a commercially available AA 6063 in the form of cold profile extruded and T6 heat treated was processed by Incremental Equal Angular Pressing (I-ECAP) through the BC route. I-ECAP deformation was applied at room temperatur
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::484cca20a1c5812c45fde9185ccce084
https://doi.org/10.1007/s12666-020-02122-4
https://doi.org/10.1007/s12666-020-02122-4
Autor:
Małgorzata Lewandowska, Aslı Günay Bulutsuz, Kadir Ozaltin, Witold Chrominski, Mehmet Emin Yurci
Publikováno v:
Materials Testing. 61:543-548
This contribution summarizes the results an investigation of the wear resistance of as received initial state and nano-structured Ti-13Nb-13Zr alloy obtained by hydrostatic extrusion. The tribological behavior was examined using a ball-on-disc tribom
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c3a5104e5b1aab835ca0a35904a81375
https://doi.org/10.3139/120.111352
https://doi.org/10.3139/120.111352
Autor:
Witold Chrominski, Małgorzata Lewandowska, Michael J. Zehetbauer, Aslı Günay Bulutsuz, Kadir Ozaltin, Mariusz Kulczyk, A. Panigrahi
Publikováno v:
Metallurgical and Materials Transactions A. 48:5747-5755
A biomedical β-type Ti-13Nb-13Zr (TNZ) (wt pct) ternary alloy was subjected to severe plastic deformation by means of hydrostatic extrusion (HE) at room temperature without intermediate annealing. Its effect on microstructure, mechanical properties,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::88e46366f886a73e90e60f8c0df2e7c6
https://doi.org/10.1007/s11661-017-4278-4
https://doi.org/10.1007/s11661-017-4278-4
Autor:
Aslı Günay Bulutsuz
Publikováno v:
Volume: 8, Issue: 1 1072-1083
Düzce Üniversitesi Bilim ve Teknoloji Dergisi
Düzce Üniversitesi Bilim ve Teknoloji Dergisi
Hydrophobic and hydrophilic surface properties are needed according to the industry field usage area such as medical, transport and energy sector. Depending on surface modification technique, surface wettability angles can be modified with changing s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::2233a69cdaa0580f63ea023517a838a0
https://dergipark.org.tr/tr/pub/dubited/issue/49725/618323
https://dergipark.org.tr/tr/pub/dubited/issue/49725/618323
Publikováno v:
Measurement. 79:354-359
Implant site preparation procedure is the most important factor that affects early osseointegration performance of a dental implant. During the side preparation procedure increase in the bone temperature above critic limit causes irreversible osteone
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::becd6a028246dfce9955de811b9fcd6c
https://doi.org/10.1016/j.measurement.2015.05.046
https://doi.org/10.1016/j.measurement.2015.05.046
Autor:
Aslı Günay Bulutsuz
Publikováno v:
Advanced Engineering Materials. 23:2000784
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::25b7fea0faa6b6bf6894557c23fed195
https://doi.org/10.1002/adem.202000784
https://doi.org/10.1002/adem.202000784
Autor:
Aslı Günay Bulutsuz
Publikováno v:
International Journal of Surface Science and Engineering. 14:223
Biomedical Ti6Al4V Eli alloy discs were subjected to blasting, anodisation and ultra viola (UV) treatments under the same manufacturing conditions with implants. These different surface modification effects on topography and wetting performance were
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8fc16152fc26fa13edecc8f03f16b41d
https://doi.org/10.1504/ijsurfse.2020.110539
https://doi.org/10.1504/ijsurfse.2020.110539
The use of materials as implants has become vital for determining optimal product design to enhance the needs of usage and longevity in body. Ultrafine grained pure titanium offers advanced mechanical properties for medical applications for most adeq
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::db75324cfae17db1ccad318de5b80729
https://hdl.handle.net/11413/3438
https://hdl.handle.net/11413/3438