Zobrazeno 1 - 10
of 34
pro vyhledávání: '"Asad A. Khalid"'
Publikováno v:
Shock and Vibration, Vol 15, Iss 6, Pp 631-637 (2008)
This work is devoted to the fabrication and investigation of the Squeeze Film Dampers (SFDs) which are widely used in many applications. This include the fabrication of a test rig and several dampers with different sizes and two different materials w
Externí odkaz:
https://doaj.org/article/33172eaea848428f9ba65d604bac1a50
Publikováno v:
Shock and Vibration, Vol 13, Iss 1, Pp 33-40 (2006)
In this paper, the vibration analysis on Teflon and steel squeeze film dampers has been carried out. At different frequency ranges, vibration amplitude and the resonance frequency are measured. The eccentricity ratio at resonance speed has been deter
Externí odkaz:
https://doaj.org/article/2af7580bc897403b9253f6c06237363f
Autor:
Asad A. Khalid
Publikováno v:
International Islamic University Malaysia Engineering Journal, Vol 3, Iss 2 (2012)
Wear behavior studies of aramid woven roving /epoxy composite has been conducted. Sliding the material against smooth steel counter face under dry and lubricated with oil conditions has been investigated. Powder of Silicon carbide has been mixed with
Externí odkaz:
https://doaj.org/article/9e094651d05f4864be7079015a344efa
Publikováno v:
In Composite Structures 1 May 2023 311
Autor:
Hafiz Muhammad Umer Farooqi, Bohye Kang, Muhammad Asad Ullah Khalid, Abdul Rahim Chethikkattuveli Salih, Kinam Hyun, Sung Hyuk Park, Dongeun Huh, Kyung Hyun Choi
Publikováno v:
Nano Convergence, Vol 8, Iss 1, Pp 1-12 (2021)
Abstract Hepatic fibrosis is a foreshadowing of future adverse events like liver cirrhosis, liver failure, and cancer. Hepatic stellate cell activation is the main event of liver fibrosis, which results in excessive extracellular matrix deposition an
Externí odkaz:
https://doaj.org/article/104c0f1d54274985b6ccd6d6fa77e3eb
Publikováno v:
8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f5bbac01c2372f5014b7ba47c81b0e36
https://doi.org/10.1063/5.0112475
https://doi.org/10.1063/5.0112475
Autor:
Asad A. Khalid, Syukri M. Harith
Publikováno v:
8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a234408b3d8f2759041314e55316b55a
https://doi.org/10.1063/5.0112469
https://doi.org/10.1063/5.0112469
Autor:
Asad A. Khalid
Publikováno v:
Key Engineering Materials. 888:43-48
Experimental work has been performed on the behaviour of glass/epoxy, aluminum, and aluminum-glass/epoxy empty and polyurethane foam filled tubes subjected to three-point bending. Tubes were of circular and square cross section area. Hand layup metho
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::369199779639bd339ed9cf1ec4234b1e
https://doi.org/10.4028/www.scientific.net/kem.888.43
https://doi.org/10.4028/www.scientific.net/kem.888.43
Publikováno v:
Composite Structures. 311:116824
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d76ac52886ef315672be9c12925c1f8c
https://doi.org/10.1016/j.compstruct.2023.116824
https://doi.org/10.1016/j.compstruct.2023.116824
Effect of Interface Geometry on Strength of Single Lap Adhesive Joint of Sisal-Glass/Epoxy Laminates
Autor:
Asad A. Khalid
Publikováno v:
Key Engineering Materials. 858:20-26
In this project, experimental work on tensile behaviour of single lap adhesive joints of sisal, glass and hybrid sisal-glass/epoxy composite laminates has been carried out. Composite laminates were fabricated by hand lay-up method using chopped stran
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::29f1664ca0418d0e2c9560020b732b74
https://doi.org/10.4028/www.scientific.net/kem.858.20
https://doi.org/10.4028/www.scientific.net/kem.858.20