Zobrazeno 1 - 10
of 127
pro vyhledávání: '"Asad A. Khalid"'
Publikováno v:
In Composite Structures 1 May 2023 311
Autor:
Hafiz Muhammad Umer Farooqi, Bohye Kang, Muhammad Asad Ullah Khalid, Abdul Rahim Chethikkattuveli Salih, Kinam Hyun, Sung Hyuk Park, Dongeun Huh, Kyung Hyun Choi
Publikováno v:
Nano Convergence, Vol 8, Iss 1, Pp 1-12 (2021)
Abstract Hepatic fibrosis is a foreshadowing of future adverse events like liver cirrhosis, liver failure, and cancer. Hepatic stellate cell activation is the main event of liver fibrosis, which results in excessive extracellular matrix deposition an
Externí odkaz:
https://doaj.org/article/104c0f1d54274985b6ccd6d6fa77e3eb
Publikováno v:
8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021.
Autor:
Asad A. Khalid, Syukri M. Harith
Publikováno v:
8TH BRUNEI INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY 2021.
Autor:
Asad A. Khalid
Publikováno v:
Key Engineering Materials. 888:43-48
Experimental work has been performed on the behaviour of glass/epoxy, aluminum, and aluminum-glass/epoxy empty and polyurethane foam filled tubes subjected to three-point bending. Tubes were of circular and square cross section area. Hand layup metho
Publikováno v:
Composite Structures. 311:116824
Effect of Interface Geometry on Strength of Single Lap Adhesive Joint of Sisal-Glass/Epoxy Laminates
Autor:
Asad A. Khalid
Publikováno v:
Key Engineering Materials. 858:20-26
In this project, experimental work on tensile behaviour of single lap adhesive joints of sisal, glass and hybrid sisal-glass/epoxy composite laminates has been carried out. Composite laminates were fabricated by hand lay-up method using chopped stran
Autor:
Muhammad Asad Ullah Khalid, Kyung Hwan Kim, Abdul Rahim Chethikkattuveli Salih, Kinam Hyun, Sung Hyuk Park, Bohye Kang, Afaque Manzoor Soomro, Muhsin Ali, Yesl Jun, Dongeun Huh, Heeyeong Cho, Kyung Hyun Choi
Publikováno v:
Lab on a chip. 22(9)
Sensing devices have shown tremendous potential for monitoring state-of-the-art organ chip devices. However, challenges like miniaturization while maintaining higher performance, longer operating times for continuous monitoring, and fabrication compl
Publikováno v:
Shock and Vibration, Vol 15, Iss 6, Pp 631-637 (2008)
This work is devoted to the fabrication and investigation of the Squeeze Film Dampers (SFDs) which are widely used in many applications. This include the fabrication of a test rig and several dampers with different sizes and two different materials w
Externí odkaz:
https://doaj.org/article/33172eaea848428f9ba65d604bac1a50
Publikováno v:
Shock and Vibration, Vol 13, Iss 1, Pp 33-40 (2006)
In this paper, the vibration analysis on Teflon and steel squeeze film dampers has been carried out. At different frequency ranges, vibration amplitude and the resonance frequency are measured. The eccentricity ratio at resonance speed has been deter
Externí odkaz:
https://doaj.org/article/2af7580bc897403b9253f6c06237363f