Zobrazeno 1 - 10
of 19
pro vyhledávání: '"Arunas Baltusnikas"'
Autor:
Inna Pitak, Anastasiia Sholokhova, Regina Kalpokaitė-Dičkuvienė, Arūnas Baltušnikas, Rita Kriūkienė, Aušra Bakšinskaitė, Monika Toleikienė
Publikováno v:
Case Studies in Construction Materials, Vol 21, Iss , Pp e03550- (2024)
Exploring innovative materials derived from natural sources holds significant promise in pursuing sustainable construction practices. This study investigates the modification of mugwort (Artemisia dubia Wall.) with TEOS (tetraethyl orthosilicate) and
Externí odkaz:
https://doaj.org/article/336a714ba0f944d09ac7e712bc6a8713
Autor:
Žydrūnas Kavaliauskas, Romualdas Kėželis, Viktorija Grigaitienė, Mindaugas Milieška, Vitas Valinčius, Rolandas Uscila, Rita Kriūkienė, Arūnas Baltušnikas
Publikováno v:
Applied Sciences, Vol 14, Iss 11, p 4801 (2024)
As the world’s population grows and resource consumption rises, there will be an increase in household waste and, consequently, the fly ash and slag from after the incineration of this waste need to be properly recycled or used as secondary raw mat
Externí odkaz:
https://doaj.org/article/2dc19de98d1f4795a8c8747b4f03b549
Autor:
Regina Kalpokaitė-Dičkuvienė, Inna Pitak, Arūnas Baltušnikas, Jūratė Čėsnienė, Rita Kriūkienė, Stasė Irena Lukošiūtė
Publikováno v:
Case Studies in Construction Materials, Vol 19, Iss , Pp e02302- (2023)
The oil shale industry generates a large amount of solid waste, the finer fraction of which can be utilized in civil engineering projects. However, for environmental, economic or technological reasons, oil shale is blended with other fuels, resulting
Externí odkaz:
https://doaj.org/article/489608dcdd784fccb4a25d7e43ac6b0c
Autor:
Rasa Kandrotaitė Janutienė, Darius Mažeika, Jaromír Dlouhý, Olha Syzonenko, Andrii Torpakov, Evgenii Lipian, Arūnas Baltušnikas
Publikováno v:
Materials, Vol 16, Iss 17, p 5894 (2023)
Dispersion-hardened materials based on TiC–AlnCn are alloys with high heat resistance, strength, and durability that can be used in aircraft and rocket technology as a hard lubricant. The titanium-rich composites of the Ti–Al–C system were synt
Externí odkaz:
https://doaj.org/article/e204abb2b3b34227b98b81f136782616
Autor:
Žydrūnas Kavaliauskas, Romualdas Kėželis, Viktorija Grigaitienė, Liutauras Marcinauskas, Mindaugas Milieška, Vitas Valinčius, Rolandas Uscila, Vilma Snapkauskienė, Dovilė Gimžauskaitė, Arūnas Baltušnikas
Publikováno v:
Materials, Vol 16, Iss 8, p 3089 (2023)
As the industry develops and energy demand increases, wind turbines are increasingly being used to generate electricity, resulting in an increasing number of obsolete turbine blades that need to be properly recycled or used as a secondary raw materia
Externí odkaz:
https://doaj.org/article/b6151fd5492c441a94682beaf9ca4779
Autor:
Žydrūnas Kavaliauskas, Vilius Dovydaitis, Romualdas Kėželis, Liutauras Marcinauskas, Vitas Valinčius, Arūnas Baltušnikas, Aleksandras Iljinas, Giedrius Gecevičius, Vytautas Čapas
Publikováno v:
Energies, Vol 14, Iss 21, p 6896 (2021)
Plasma spraying and magnetron sputtering were used to form graphite–copper films on an n-type silicon surface. The main objective of this work was to compare the properties of the obtained graphite–copper Schottky photodiodes prepared using two d
Externí odkaz:
https://doaj.org/article/2300ac8ddf954eb3a7dfa3b3c55166d5
Autor:
Denis SOKOL, Kristina KLEMKAITE-RAMANAUSKE, Aleksander KHINSKY, Kestutis BALTAKYS, Aldona BEGANSKIENE, Arunas BALTUSNIKAS, Jiri PINKAS, Aivaras KAREIVA
Publikováno v:
Medžiagotyra, Vol 23, Iss 2, Pp 144-149 (2017)
Layered double hydroxides having different cationic (Mg2+, Co2+, Al3+) composition were successfully synthesized by the low supersaturation method. The samples were thermally decomposed and reconstructed using water and nitrate media at different tem
Externí odkaz:
https://doaj.org/article/9a78ffb70cee4f82993df66a15246822
Autor:
Rimantas LEVINSKAS, Romualdas KEZELIS, Kristina BRINKIENE, Viktorija GRIGAITIENE, Vitas VALINCIUS, Irena LUKOSIUTE, Zydrunas KAVALIAUSKAS, Arunas BALTUSNIKAS
Publikováno v:
Medžiagotyra, Vol 17, Iss 4, Pp 423-427 (2011)
Simulation of the temperature distribution on space vehicles surfaces during its reentry phase is most important for assessing its landing safety. Recently composite materials, produced from high temperature resistance composites are under intensive
Externí odkaz:
https://doaj.org/article/da2083fc9eeb432981dc4497c82c6ef9
Autor:
Kazimieras Juzenas, Rolandas Sertvytis, Irena Lukosiute, Antanas Ciuplys, Regita Bendikiene, Arunas Baltusnikas, Regina Kalpokaite-Dickuviene, Julius Denafas
Publikováno v:
Waste and Biomass Valorization. 12:2757-2767
The aim of this research is to find possible ways to recycle and re-use industrial solar cell scrap. The work is concentrated on cells which are broken, damaged or rejected during the manufacturing process, which accounts from 2 to 3 percent of whole
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::601e215b38b42622e10124026b7f6438
https://doi.org/10.1007/s12649-020-01153-8
https://doi.org/10.1007/s12649-020-01153-8
Publikováno v:
Eastern-European Journal of Enterprise Technologies; Vol. 1 No. 6(115) (2022): Technology organic and inorganic substances; 53-63
Eastern-European Journal of Enterprise Technologies; Том 1 № 6(115) (2022): Технологии органических и неорганических веществ; 53-63
Eastern-European Journal of Enterprise Technologies; Том 1 № 6(115) (2022): Технології органічних та неорганічних речовин; 53-63
Eastern-European Journal of Enterprise Technologies; Том 1 № 6(115) (2022): Технологии органических и неорганических веществ; 53-63
Eastern-European Journal of Enterprise Technologies; Том 1 № 6(115) (2022): Технології органічних та неорганічних речовин; 53-63
This experimental research was purposed to investigate the production and energy potential of solid recovered fuel (SRF), obtained by extraction of prohibited materials, shredding and drying, from refuse-derived fuel (RDF) to use as an alternative fu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::566c667641601e4bc33eef68f5bfd734
http://journals.uran.ua/eejet/article/view/251439
http://journals.uran.ua/eejet/article/view/251439