Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Anton Smolej"'
The superplasticity of friction stir processed Al-5Mg alloy with additions of scandium and zirconium
Autor:
Vukasin Dragojevic, Aleš Nagode, Damjan Klobčar, Edvard Slacek, Samo Smolej, Anton Smolej, Brane Skaza
Publikováno v:
International Journal of Materials Research. 105:1218-1226
The paper describes the effect of minor additions of scandium and zirconium on the superplastic behaviour of friction stir processed Al-5Mg based alloy. The measurements included the flow curves and tensile elongations of (in wt.%) Al-5Mg-0.1Zr, Al-5
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::12c4faaf807f93b95c047cd18182ec18
https://doi.org/10.3139/146.111141
https://doi.org/10.3139/146.111141
Publikováno v:
Welding in the World. 59:269-281
A parametric study of friction stir spot welding (FSSW) of lap joints in aluminium alloy 5754 using a pinless tool with scrolled shoulder is presented. Experimental plan was done according to the response surface methodology (RSM), where tool rotatio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::01194f07b81a2c4b7c68825d21e31766
https://doi.org/10.1007/s40194-014-0208-x
https://doi.org/10.1007/s40194-014-0208-x
Autor:
Aleš Nagode, Vukasin Dragojevic, Brane Skaza, Damjan Klobčar, Samo Smolej, Edvard Slacek, Anton Smolej
Publikováno v:
Materials Science and Engineering: A. 590:239-245
The article describes the effect of friction stir processing (FSP) on the superplastic behaviour of the Al–4.5 Mg alloy containing Sc and Zr. The results yielded by the FSPed sheet were compared with the superplastic behaviour of the same alloy pro
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::86dde382e3f7070761c0ebca6c745c2c
https://doi.org/10.1016/j.msea.2013.10.027
https://doi.org/10.1016/j.msea.2013.10.027
Autor:
Anton Smolej, Brane Skaza, Vukasin Dragojevic, Edvard Slacek, Boštjan Markoli, Damjan Klobčar
Publikováno v:
Materials Science Forum. :395-401
The aim of the present investigation was to determine and to compare the superplastic behaviour of the AA5083 (Al-Mg-Mn) alloy with Sc and Zr additions. The investigated alloys were processed to form sheets by conventional hot and cold rolling. The s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::60af6362c80c23e039628e30afb4aa2f
https://doi.org/10.4028/www.scientific.net/msf.706-709.395
https://doi.org/10.4028/www.scientific.net/msf.706-709.395
Publikováno v:
Journal of Materials Engineering and Performance. 19:221-230
This article describes the superplastic behavior of the Al-4.5Mg-0.46Mn-0.44Sc alloy. The investigated alloy was produced by casting and was conventionally processed to form a sheet with a thickness of 1.9 mm and an average grain size of 11 μm. The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2c05f99f75bd10ba4ed1d9c0566b5318
https://doi.org/10.1007/s11665-009-9450-6
https://doi.org/10.1007/s11665-009-9450-6
Publikováno v:
Materials Characterization. 59:1458-1465
This work deals with the influence of TiB2 particles already present, and added in the form of Al–5Ti–1B grain refiner, on the effectiveness of Al–3Ti–0.15C grain refiner in an Al–Fe alloy. We found that Al–3Ti–0.15C grain refiner is in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c9edddd2b345963b4db4e0ba66a150ea
https://doi.org/10.1016/j.matchar.2008.01.008
https://doi.org/10.1016/j.matchar.2008.01.008
Publikováno v:
Tribology International. 40:374-384
A newly designed “block-on-cylinder” wear resistance testing rig, which allows testing at higher contact pressures than conventional testing methods, was used to elucidate the effect of an iron nitride compound layer (white layer) on the wear res
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::eddfad1cb8c1ec1c93a35683693a1830
https://doi.org/10.1016/j.triboint.2005.09.032
https://doi.org/10.1016/j.triboint.2005.09.032
Publikováno v:
JSME International Journal Series C. 49:121-127
Dies made from AISI H10 die steel with narrow and deep gaps were nitrided by various manufacturers of equipment for ionic and gas nitriding. The manufacturers chose the optimum nitriding parameters themselves, based on their experience with extrusion
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::41bceddd97ef7a8052fd72715f39c5e2
https://doi.org/10.1299/jsmec.49.121
https://doi.org/10.1299/jsmec.49.121
Publikováno v:
Journal of Materials Processing Technology. 118:397-402
Aluminium AA7475 alloy (Al–Zn–Mg–Cu) was thermomechanically treated by four procedures which included various combinations of rolling, solution annealing, quenching and overageing. The influence of these treatment procedures on the size and the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::962db329707bedee536f1a162cb8540d
https://doi.org/10.1016/s0924-0136(01)00906-2
https://doi.org/10.1016/s0924-0136(01)00906-2
Publikováno v:
Journal of Materials Processing Technology. 53:373-384
The influence of the cooling rate after the homogenizing of free-cutting AlMgSiPb alloy on the stresses required for deformation after various times of heating onto the working temperature was determined. After the direct extrusion the alloy was trea
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a23018558fa6983d08ea563b6c3870f2
https://doi.org/10.1016/0924-0136(95)01994-p
https://doi.org/10.1016/0924-0136(95)01994-p