Zobrazeno 1 - 10
of 37
pro vyhledávání: '"Anna Zawada-Tomkiewicz"'
Publikováno v:
Materials, Vol 17, Iss 2, p 487 (2024)
A study was made of the machinability of NiTi alloy in turning, under conditions resulting in a small cutting layer. The experiment involved cutting with variable feeds ranging from 0.01 to 0.1 mm/rev. The cutting conditions were carefully chosen, co
Externí odkaz:
https://doaj.org/article/a9ca3f612fce41398f2a588dbfc076fe
Publikováno v:
Metrology and Measurement Systems, Vol vol. 27, Iss No 4, Pp 563-574 (2021)
This article concerns a new method of assessing the thread cutting process and the quality of the formed thread using the method of optical observation of the workpiece during machining. A series of digital images of the thread profile was taken in t
Externí odkaz:
https://doaj.org/article/429487b372b54889b5d65353c1e0b2d6
Publikováno v:
Materials, Vol 15, Iss 23, p 8372 (2022)
This article describes a system for measuring and compensating for errors resulting from the cutting process in order to improve the accuracy of the workpiece. Measurements were performed by means of an automatic measurement unit. The diameter of the
Externí odkaz:
https://doaj.org/article/2ac95f2499d64906a91f17d6c34e5849
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 114:2767-2781
The article is devoted to the study of the effect of cryogenic cooling on the tool wear in thread turning tests. The tool wear and its influence on the thread accuracy were investigated. Two different grades of titanium alloys were used for comparati
Publikováno v:
Strojniški vestnik
The micro-smoothing in this paper concerns belt-grinding operations in two varieties that differ in the use of axial oscillations. The method relies on the continuous slow introduction of the finishing film in the working zone. The film is applied to
One of the most universal measuring techniques in contemporary industry is a coordinate measuring technique. This paper focuses on a problem of measurements of form deviations with the use of coordinate measuring machines (CMMs). Nowadays, such measu
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a79f3317e21bdebe912ea0bf970a2fac
https://doi.org/10.21203/rs.3.rs-229374/v1
https://doi.org/10.21203/rs.3.rs-229374/v1
Publikováno v:
Innovations Induced by Research in Technical Systems ISBN: 9783030375652
The article is devoted to the issues of finishing machining, in which changes on the cutting edge significantly affect the quality of the machined surface. In tests EN 100Cr6 hardened steel has been used with a hardness of 60 HRC. The cutting tool ma
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b078fe3ff39ae51e797a60f6ab40087d
https://doi.org/10.1007/978-3-030-37566-9_4
https://doi.org/10.1007/978-3-030-37566-9_4
Publikováno v:
Lecture Notes in Mechanical Engineering ISBN: 9783030499099
The aim of the paper was to identify the physical phenomena in machining processes of shape memory alloys (SMA) NiTi. The possibilities of machining NiTi alloys are limited due to the low and variable elastic modulus for phases and other material pro
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::faf228c36cdbc5ccb25f521a47fd30c5
https://doi.org/10.1007/978-3-030-49910-5_15
https://doi.org/10.1007/978-3-030-49910-5_15
Publikováno v:
Innovations Induced by Research in Technical Systems ISBN: 9783030375652
Current changes in the manufacturing techniques, referred to as Industry 4.0, require developing them as cyber-physical systems. And such a cyber physical approach has been used in the elaboration of the vision smart sensor (VSS) applied for the eval
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e116bae865e8e4290e646eea779e5d8f
https://doi.org/10.1007/978-3-030-37566-9_9
https://doi.org/10.1007/978-3-030-37566-9_9