Zobrazeno 1 - 10
of 83
pro vyhledávání: '"Anna Bazan"'
Autor:
Artur Szajna, Anna Bazan, Jarosław Tymczyszyn, Małgorzata Kawalec, Tomasz Rydzak, Paweł Kubik
Publikováno v:
Advances in Sciences and Technology, Vol 18, Iss 8, Pp 181-190 (2024)
The article presents the results of experimental studies of the milling process of Vanadis 4 Extra - tool steel 1.2210 with a four-flute AlCrN-coated end mill. On the basis of the measured values of the total cutting force F and the roughness paramet
Externí odkaz:
https://doaj.org/article/1b053d4a4c494577a2905bf95f3b424e
Publikováno v:
Materials, Vol 17, Iss 17, p 4315 (2024)
Additive manufacturing (AM) techniques are among the fastest-growing technologies for producing even the most geometrically complex models. Unfortunately, the lack of development of metrology guidelines for these methods, related to dimensional and g
Externí odkaz:
https://doaj.org/article/bac861fa9e4742acb9538e62c8085f02
Publikováno v:
Advances in Sciences and Technology, Vol 17, Iss 3, Pp 133-144 (2023)
The article presents the results of research concerning the analysis of the possibility of the innovative application of the LineScan non-contact laser measuring probe controlled by the ACCURA II coordinate measuring machine in the field of measureme
Externí odkaz:
https://doaj.org/article/866f9e4ee7ea42aeb931a1c097b31302
Autor:
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Publikováno v:
Advances in Sciences and Technology, Vol 17, Iss 1, Pp 35-45 (2023)
Abstract: Additive processes allow for almost any manufacturing of screw-threaded joint elements. However, this requires knowledge of the geometrical relationships of a threaded itself and the strength of materials from which the screw-threaded joint
Externí odkaz:
https://doaj.org/article/9f6c5587671047bcba3263e392064ba6
Publikováno v:
Materials, Vol 17, Iss 3, p 663 (2024)
This research paper aims to explore the mechanical characteristics of polyamide PA12 (PA12) as a 3D material printed utilizing Selective Laser Sintering (SLS) and HP MultiJet Fusion (HP MJF) technologies in order to design and manufacture forearm ort
Externí odkaz:
https://doaj.org/article/4a3485261f194a84bf7c5c1f00118663
Autor:
Artur Szajna, Anna Bazan
Publikováno v:
Advances in Sciences and Technology, Vol 15, Iss 4, Pp 149-159 (2021)
The article presents the results of experimental research on the grinding of corundum ceramics in the pre-sintered state, with spherical diamond heads. The aim of the experiment was to determine the effect of grain size and feed rate on selected aspe
Externí odkaz:
https://doaj.org/article/5e0d69ca09c0453a9c96e6d0aafb9db5
Publikováno v:
Machines, Vol 11, Iss 6, p 615 (2023)
Surface topography measurements are becoming more and more popular and complement the 2D analysis of surface texture. The selection of the measurement area is not yet included in the standards, and the size of this area affects the values of the dete
Externí odkaz:
https://doaj.org/article/f05263dbeef046cda246b0d3d691b295
Publikováno v:
Materials, Vol 16, Iss 6, p 2405 (2023)
Additive manufacturing (AM) is a rapidly growing branch of manufacturing techniques used, among others, in the medical industry. New machines and materials and additional processing methods are improved or developed. Due to the dynamic development of
Externí odkaz:
https://doaj.org/article/6734a01514a04118894a90239f0bfaed
Publikováno v:
Journal of Ecological Engineering, Vol 20, Iss 1, Pp 25-33 (2019)
ABSTRACT With regard to municipal spatial policies, the issue of flood protection, and hence directions of development of flood-endangered land seems rather significant, given the possible social and economic consequences of mistakenly taken decision
Externí odkaz:
https://doaj.org/article/baf47568318c4f7f8837ff472e58881f
Publikováno v:
Materials, Vol 15, Iss 3, p 1188 (2022)
The paper presents a method of forecasting the product surface topography after five-axis machining with a lens-shaped end-mill. Surface roughness is one of the key parameters considered when assessing the effectiveness of the machining process, espe
Externí odkaz:
https://doaj.org/article/c434c566d6d5436892851596d9aca8bd