Zobrazeno 1 - 10
of 23
pro vyhledávání: '"Anh-Tung Luu"'
Publikováno v:
Engineering, Technology & Applied Science Research, Vol 14, Iss 4 (2024)
In order to design a high-efficiency two-stage gearbox to reduce power loss and conserve energy, a Multi-Criterion Decision-Making (MCDM) method is selected for solving the Multi-Objective Optimization Problem (MOOP) in this research. The study's obj
Externí odkaz:
https://doaj.org/article/b2015b3c250244048617bd26c901e7f3
Publikováno v:
Machines, Vol 12, Iss 6, p 365 (2024)
This paper provides a novel application of a multi-criterion decision-making (MCDM) method to the multi-objective optimization problem of designing a two-stage helical gearbox. This study’s goal is to identify the ideal primary design elements that
Externí odkaz:
https://doaj.org/article/9aeaf589e7874248b3bcf69f3080c66b
Autor:
Thi-Hong Tran, Manh-Cuong Nguyen, Anh-Tung Luu, The-Vinh Do, Thu-Quy Le, Trung-Tuyen Vu, Ngoc-Giang Tran, Thi-Tam Do, Ngoc-Pi Vu
Publikováno v:
Machines, Vol 8, Iss 3, p 36 (2020)
As a successful solution applied to electrical discharge machining (EDM), powder-mixed electrical discharge machining (PMEDM) has been proposed as an upgrade of the EDM process. The optimization of the process parameters of PMEDM is essential and pre
Externí odkaz:
https://doaj.org/article/3f86b08498dc4d22960e0ac3d83a7550
Autor:
Ngoc-Pi Vu, Xuan-Hung Le, Dinh-Ngoc Nguyen, Anh-Tung Luu, Thanh-Tu Nguyen, Ngoc-Giang Tran, Thi-Hong Tran, Thangaraj Muthuramalingam
Publikováno v:
Applied Sciences, Vol 10, Iss 11, p 3920 (2020)
The blasting technique has been broadly utilized to prepare new surfaces for painting, engraving, etc., in industry. In fact, the minimization of the cleaning cost system is essential. However, the knowledge of this technique in terms of optimization
Externí odkaz:
https://doaj.org/article/0a9a0ae88d474df08ee980dded0a0741
Autor:
Ngoc-Pi Vu, Dinh-Ngoc Nguyen, Anh-Tung Luu, Ngoc-Giang Tran, Thi-Hong Tran, Van-Cuong Nguyen, Thanh-Danh Bui, Hong-Linh Nguyen
Publikováno v:
Applied Sciences, Vol 10, Iss 7, p 2365 (2020)
This study is aimed at determining optimum partial gear ratios to minimize the cost of a three-stage helical gearbox. In this work, eleven input parameters were investigated to find their influence on the optimum gear ratios of the second and the thi
Externí odkaz:
https://doaj.org/article/1840f0484a244d72b21a540d952c0651
Autor:
Thi-Hong Tran, Anh-Tung Luu, Quoc-Tuan Nguyen, Hong-Ky Le, Anh-Tuan Nguyen, Tien-Dung Hoang, Xuan-Hung Le, Tien-Long Banh, Ngoc-Pi Vu
Publikováno v:
Metals, Vol 9, Iss 4, p 448 (2019)
Based on a cost analysis, a method of identifying and predicting optimum replaced grinding wheel diameter (De.op) in a surface grinding operation for 9CrSi steel material was developed in this study. The De.op value was determined by minimizing the c
Externí odkaz:
https://doaj.org/article/36e5a8874007455d87f6a650061f5bb3
Autor:
Thi-Hong Tran, Xuan-Hung Le, Quoc-Tuan Nguyen, Hong-Ky Le, Tien-Dung Hoang, Anh-Tung Luu, Tien-Long Banh, Ngoc-Pi Vu
Publikováno v:
Applied Sciences, Vol 9, Iss 7, p 1363 (2019)
This paper shows an optimization study on calculating the optimum replaced wheel diameter in internal grinding of stainless steel. In this work, the effects of the input factors, including the initial diameter, the grinding wheel width, the ratio bet
Externí odkaz:
https://doaj.org/article/9f2fa169d72b4150b155f2663868895d
Autor:
Ngoc-Pi Vu, Quoc-Tuan Nguyen, Thi-Hong Tran, Hong-Ky Le, Anh-Tuan Nguyen, Anh-Tung Luu, Van-Tung Nguyen, Xuan-Hung Le
Publikováno v:
Applied Sciences, Vol 9, Iss 5, p 957 (2019)
Cutting regime parameters play an important role in determining the efficiency of the grinding process and the quality of the ground parts. In this study, the influences of the cutting parameters, including the cutting depth (ae), the feed rate (Fe)
Externí odkaz:
https://doaj.org/article/5c3e768800cf41a9adccdd0db5aa4b8f
Publikováno v:
Engineering, Technology & Applied Science Research; Aug2024, Vol. 14 Issue 4, p15454-15463, 10p
Autor:
Xuan Hung, Le, Ngoc Pi, Vu, Thi Hong, Tran, Hong Ky, Le, Thi Lien, Vu, Anh Tung, Luu, Tien Long, Banh
Publikováno v:
In Materials Today: Proceedings 2019 18 Part 7:2257-2264