Zobrazeno 1 - 10
of 34
pro vyhledávání: '"Andreas S. Schneider"'
Autor:
Nicolas J. Peter, Erika Griesshaber, Christian Reisecker, Sabine Hild, Mariana V.G. Oliveira, Wolfgang W. Schmahl, Andreas S. Schneider
Publikováno v:
Materialia. 28:101749
Autor:
Marc Ludovici, Frank Mücklich, Dominik Britz, Andreas S. Schneider, Jessica Gola, Marc Winter, Thorsten Staudt
Publikováno v:
Computational Materials Science. 148:324-335
The mechanical properties of modern multi-phase materials significantly depend on the distribution, the shape and the size of the microstructural constituents. Thus, quantification and classification of the microstructure are decisive in identifying
Autor:
Hans Jürgen Maier, Mareike Frensemeier, Dominik Britz, Christopher M. Laursen, Andreas S. Schneider, Carl P. Frick, Frank Mücklich, Stephan A. Brinckmann
Publikováno v:
Materials Science and Engineering: A. 675:253-261
This study investigated the effect of temperature on indentation-induced one-way and two-way shape memory properties in Ti-50.3 at% Ni alloy. Indentation temperatures ranged from below the martensite finish temperature (Mf) to above the austenite fin
Autor:
Andreas S. Schneider, Nina Harke, Michael Musch, Christian Bach, Markus A. Kuczyk, S. Pokupić, Rudolf Moritz, Sebastian Edeling, Alexander Haese, Mahmoud Farzat, Christian Wagner, Michael C. Truß, Volker Zimmermanns, Christian Schwentner, Inga Peters, Florian Distler, Michael Waldner, Rainer Hein, Chiara Sighinolfi, Andreas Blana, Stephan Buse, Christina L Engels, Bernardo Rocco, Jens-Uwe Stolzenburg, Andreas Manseck, Boris Hadaschik, Frank Peter Berger, Hendrik Borgmann, Tobias Egner, Christian Wülfing, Jan Philipp Radtke, Jorn H Witt, André Schumann
Publikováno v:
PLoS ONE
PLOS ONE, 15(9):e0239027
PLOS ONE 15(9), e0239027 (2020). doi:10.1371/journal.pone.0239027
PLoS ONE, Vol 15, Iss 9, p e0239027 (2020)
PLOS ONE, 15(9):e0239027
PLOS ONE 15(9), e0239027 (2020). doi:10.1371/journal.pone.0239027
PLoS ONE, Vol 15, Iss 9, p e0239027 (2020)
PLOS ONE 15(9), e0239027 (2020). doi:10.1371/journal.pone.0239027
Published by PLOS, San Francisco, California, US
Published by PLOS, San Francisco, California, US
Publikováno v:
MRS Communications. 5:77-82
In this study, Vickers indentation was used to investigate the two-way shape-memory effect (TWSME) in an austenitic Ti-50.9 at.% Ni alloy, exposed to different heat treatments. Three aging treatments were used to manipulate the size of Ti3Ni4 precipi
Autor:
Roland Bennewitz, Andreas S. Schneider, Felix C. Wählisch, Mariana V.G. Oliveira, Wolfgang W. Schmahl, Oscar Torrents Abad, Erika Griesshaber, Nicolas J. Peter
Publikováno v:
Acta Biomaterialia. 10:3978-3985
We investigated the friction and wear behavior as well as the mechanical properties of the periostracum of Mytilus sp. Tribological properties were determined with a reciprocal sliding microtribometer, while mechanical characterization was performed
Publikováno v:
MicrobiologyOpen
Copper kills bacteria rapidly by a mechanism that is not yet fully resolved. The antibacterial property of copper has raised interest in its use in hospitals, in place of plastic or stainless steel. On the latter surfaces, bacteria can survive for da
Autor:
Nishant Lakhera, Amy L. DiRienzo, Christopher M. Yakacki, Carl P. Frick, Andreas S. Schneider, Alicia C. Martin, David L. Safranski
Publikováno v:
Composites Science and Technology. 89:110-119
The purpose of this study was to investigate increasing crystalline structure in polyetheretherketone (PEEK) via resistive heating. Multi-walled carbon nanotubes (MWCNT) were thoroughly mixed with PEEK powder, hot-pressed into a solid composite, then
Publikováno v:
International Journal of Plasticity. 49:145-151
The basic dislocation processes responsible for plasticity of fcc and bcc metals are fundamentally different. Dislocation based deformation in fcc metals is not very sensitive to temperature whereas in bcc metals, deformation is strongly temperature
Autor:
Elmar Kroner, Carl P. Frick, Annalena Graucob, Andreas S. Schneider, Nishant Lakhera, Eduard Arzt, Christopher M. Yakacki
Publikováno v:
International Journal of Adhesion and Adhesives. 44:184-194
This research is the first of its kind to study the comparison between spherical and flat probe adhesion behavior as a function of viscoelasticity. Viscoelastic properties were tailored through the use of acrylate networks synthesized from tert-butyl