Zobrazeno 1 - 10
of 143
pro vyhledávání: '"Altino Loureiro"'
Autor:
Joana Rebelo Kornmeier, Maria José Marques, Weimin Gan, António Castanhola Batista, Sanjooram Paddea, Altino Loureiro
Publikováno v:
Materials, Vol 15, Iss 4, p 1364 (2022)
The effect of the heat treatment on the residual stresses of welded cladded steel samples is analyzed in this study. The residual stresses across the plate’s square sections were determined using complementary methods; applying diffraction with neu
Externí odkaz:
https://doaj.org/article/46003da316ed49468ddf3317e24459aa
Publikováno v:
Materials, Vol 14, Iss 20, p 6020 (2021)
In the current investigation, the influence of the tool geometry, the position of the materials in the joint, the welding speed on the temperature and torque developed, and on the quality of the welds in dissimilar and tri-dissimilar T joints were an
Externí odkaz:
https://doaj.org/article/3a02ee0184ac46989b762479c49adfb8
Publikováno v:
Polymers, Vol 13, Iss 13, p 2056 (2021)
The objective of current work is to analyse the influence of different welding techniques and welding parameters on the morphology and mechanical strength of friction stir welds (FSW) in polymers, based on data collected in the literature. In the cur
Externí odkaz:
https://doaj.org/article/d1406ff5a4e345729f8b20db60afc10e
Publikováno v:
Metals, Vol 10, Iss 12, p 1668 (2020)
Recent industrial criteria, focused on obtaining increasingly efficient structures, require the production of multimaterial components [...]
Externí odkaz:
https://doaj.org/article/86bcb5a5a04e4079992ef1cf786ee59a
Publikováno v:
Metals, Vol 10, Iss 8, p 1062 (2020)
The production of aluminum-carbon steel and aluminum-stainless steel clads is challenging, and explosive welding is one of the most suitable processes to achieve them. The present work aims to investigate the coupled effect of two strategies for opti
Externí odkaz:
https://doaj.org/article/2b3d9e1c88424640b30566b99bd03952
Nugget Formation and Mechanical Behaviour of Friction Stir Welds of Three Dissimilar Aluminum Alloys
Publikováno v:
Materials, Vol 13, Iss 11, p 2664 (2020)
The aim of this research was to investigate the influence of the properties of the base materials and welding speed on the morphology and mechanical behavior of the friction stir welds of three dissimilar aluminum alloys in a T-joint configuration. T
Externí odkaz:
https://doaj.org/article/3c6b0239f72448f7afe414ab2c1cb8ea
Publikováno v:
Archives of Civil and Mechanical Engineering. 22
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0444ccefc7d0e47981b9d4f5863a9b60
https://doi.org/10.1007/s43452-022-00497-3
https://doi.org/10.1007/s43452-022-00497-3
Autor:
L.F.M. da Silva, S. Safaei, R. Beygi, Altino Loureiro, Alireza Akhavan-Safar, M. Zarezadeh Mehrizi
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 112:1951-1964
A 5-mm-thick aluminum sheet (Al) was successfully welded by friction stir welding (FSW) to a 3-mm-thick carbon steel (St) in a butt configuration. For this purpose, a new joint design was used where a support plate was employed under the St part and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a81962c0126b60c0cf791917a149cfbc
https://doi.org/10.1007/s00170-020-06406-3
https://doi.org/10.1007/s00170-020-06406-3
Autor:
Altino Loureiro
Publikováno v:
Metálica. :20-23
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2dcf92953a7d4bd14c016ae598f7de64
https://doi.org/10.30779/cmm_metalica_59_03
https://doi.org/10.30779/cmm_metalica_59_03
Autor:
Altino Loureiro
Publikováno v:
Metálica. :24-28
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7e28ecb652192322671f4e7adad5dd8d
https://doi.org/10.30779/cmm_metalica_58_04
https://doi.org/10.30779/cmm_metalica_58_04